diff mbox series

[v2,3/3] arm64: dts: imx8mp-tqma8mpql-mba8mpxl: Fix USB connector description

Message ID 20231213211847.1096033-3-festevam@gmail.com (mailing list archive)
State New, archived
Headers show
Series [v2,1/3] arm64: dts: imx8mp-verdin: Fix USB connector description | expand

Commit Message

Fabio Estevam Dec. 13, 2023, 9:18 p.m. UTC 
From: Fabio Estevam <festevam@denx.de>

The USB connector should not be placed under the dwc3 node.

Move the USB connector out of the SoC level and use port to describe
the connection to the dwc3 controller.

This fixes the following dt-schema warning:

imx8mp-tqma8mpql-mba8mpxl.dtb: usb@38100000: Unevaluated properties are not allowed ('connector' was unexpected)
	from schema $id: http://devicetree.org/schemas/usb/snps,dwc3.yaml#
	
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
---
Changes since v1:
- Collected Alexander's tags. 

 .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 26 ++++++++++++++-----
 1 file changed, 19 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 4b161564a284..505b70cb2bd7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -55,6 +55,21 @@  clk_xtal25: clk-xtal25 {
 		clock-frequency = <25000000>;
 	};
 
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		label = "X29";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usbcon0>;
+		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+
+		port {
+			usb_dr_connector: endpoint {
+				remote-endpoint = <&usb3_dwc>;
+			};
+		};
+	};
+
 	fan0: pwm-fan {
 		compatible = "pwm-fan";
 		pinctrl-names = "default";
@@ -625,13 +640,10 @@  &usb_dwc3_0 {
 	role-switch-default-mode = "peripheral";
 	status = "okay";
 
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		label = "X29";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_usbcon0>;
-		id-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+	port {
+		usb3_dwc: endpoint {
+			remote-endpoint = <&usb_dr_connector>;
+		};
 	};
 };