| Message ID | 20231229145232.6163-1-ilpo.jarvinen@linux.intel.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/1] net: mdio: mux-bcm-iproc: Use alignment helpers and SZ_4K | expand |
On 12/29/23 06:52, Ilpo Järvinen wrote: > Instead of open coding, use IS_ALIGNED() and ALIGN_DOWN() when dealing > with alignment. Replace also literals with SZ_4K. > > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Hello: This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Fri, 29 Dec 2023 16:52:32 +0200 you wrote: > Instead of open coding, use IS_ALIGNED() and ALIGN_DOWN() when dealing > with alignment. Replace also literals with SZ_4K. > > Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> > --- > drivers/net/mdio/mdio-mux-bcm-iproc.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) Here is the summary with links: - [1/1] net: mdio: mux-bcm-iproc: Use alignment helpers and SZ_4K https://git.kernel.org/netdev/net-next/c/73b2e2e3fe26 You are awesome, thank you!
diff --git a/drivers/net/mdio/mdio-mux-bcm-iproc.c b/drivers/net/mdio/mdio-mux-bcm-iproc.c index a750bd4c77a0..1ce7d67ba72e 100644 --- a/drivers/net/mdio/mdio-mux-bcm-iproc.c +++ b/drivers/net/mdio/mdio-mux-bcm-iproc.c @@ -2,6 +2,7 @@ /* * Copyright 2016 Broadcom */ +#include <linux/align.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> @@ -11,6 +12,7 @@ #include <linux/of_mdio.h> #include <linux/phy.h> #include <linux/platform_device.h> +#include <linux/sizes.h> #define MDIO_RATE_ADJ_EXT_OFFSET 0x000 #define MDIO_RATE_ADJ_INT_OFFSET 0x004 @@ -220,12 +222,12 @@ static int mdio_mux_iproc_probe(struct platform_device *pdev) md->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res); if (IS_ERR(md->base)) return PTR_ERR(md->base); - if (res->start & 0xfff) { + if (!IS_ALIGNED(res->start, SZ_4K)) { /* For backward compatibility in case the * base address is specified with an offset. */ dev_info(&pdev->dev, "fix base address in dt-blob\n"); - res->start &= ~0xfff; + res->start = ALIGN_DOWN(res->start, SZ_4K); res->end = res->start + MDIO_REG_ADDR_SPACE_SIZE - 1; }
Instead of open coding, use IS_ALIGNED() and ALIGN_DOWN() when dealing with alignment. Replace also literals with SZ_4K. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> --- drivers/net/mdio/mdio-mux-bcm-iproc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)