diff mbox series

[v2,06/15] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times

Message ID 20240102-j7200-pcie-s2r-v2-6-8e4f7d228ec2@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Add suspend to ram support for PCIe on J7200 | expand

Commit Message

Thomas Richard Jan. 26, 2024, 2:36 p.m. UTC
For suspend and resume support, wiz_clock_init needs to be called multiple
times.

Add a parameter to wiz_clock_init to be able to skip clocks registration.

Based on the work of Théo Lebrun <theo.lebrun@bootlin.com>

Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/phy/ti/phy-j721e-wiz.c | 60 +++++++++++++++++++++++++-----------------
 1 file changed, 36 insertions(+), 24 deletions(-)

Comments

Andy Shevchenko Jan. 26, 2024, 9:38 p.m. UTC | #1
On Fri, Jan 26, 2024 at 4:37 PM Thomas Richard
<thomas.richard@bootlin.com> wrote:
>
> For suspend and resume support, wiz_clock_init needs to be called multiple

wiz_clock_init()

> times.
>
> Add a parameter to wiz_clock_init to be able to skip clocks registration.

Ditto.

...to skip the registration of the clocks.

...

> -static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> +static int wiz_clock_init(struct wiz *wiz, struct device_node *node, bool probe)

So, why not refactor this to two functions first?

...

> +               clk = devm_clk_get(dev, "core_ref_clk");
> +               if (IS_ERR(clk)) {

> +                       dev_err(dev, "core_ref_clk clock not found\n");
> +                       ret = PTR_ERR(clk);
> +                       return ret;

This is wrong and has to be fixed in the original code.
The correct approach is to use `return dev_err_probe(...)` or open
code it, but since we have a helper, open coding is highly
discouraged.

> +               }

...

> +               if (wiz->data->pma_cmn_refclk1_int_mode) {
> +                       clk = devm_clk_get(dev, "core_ref1_clk");
> +                       if (IS_ERR(clk)) {
> +                               dev_err(dev, "core_ref1_clk clock not found\n");
> +                               ret = PTR_ERR(clk);
> +                               return ret;

Ditto.

> +                       }

...

> +               clk = devm_clk_get(dev, "ext_ref_clk");
> +               if (IS_ERR(clk)) {
> +                       dev_err(dev, "ext_ref_clk clock not found\n");
> +                       ret = PTR_ERR(clk);
> +                       return ret;

Ditto.

> +               }

...

> +       /* What follows is about registering clocks. */
> +       if (!probe)
> +               return 0;

Just refactor properly, no need to have this ugly mix of devm_*() for
probe stage, parameter and HW related things.
Andi Shyti Jan. 29, 2024, 11:02 p.m. UTC | #2
Hi Thomas,

On Fri, Jan 26, 2024 at 03:36:48PM +0100, Thomas Richard wrote:
> For suspend and resume support, wiz_clock_init needs to be called multiple
> times.
> 
> Add a parameter to wiz_clock_init to be able to skip clocks registration.
> 
> Based on the work of Théo Lebrun <theo.lebrun@bootlin.com>
> 
> Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
> ---
>  drivers/phy/ti/phy-j721e-wiz.c | 60 +++++++++++++++++++++++++-----------------
>  1 file changed, 36 insertions(+), 24 deletions(-)
> 
> diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
> index fc3cd98c60ff..09f7edf16562 100644
> --- a/drivers/phy/ti/phy-j721e-wiz.c
> +++ b/drivers/phy/ti/phy-j721e-wiz.c
> @@ -1076,7 +1076,7 @@ static int wiz_clock_register(struct wiz *wiz)
>  	return ret;
>  }
>  
> -static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
> +static int wiz_clock_init(struct wiz *wiz, struct device_node *node, bool probe)

the 'bool probe' is ugly. When someone reads something like 
"ret = wiz_clock_init(wiz, node, true);" wonders what the
true/false is and needs to follow through the function to
understand.

Please, split this function (and below) into two parts:

wiz_clock_probe() and wiz_clock_init(). The former calls the
latter. Later on you can just call wiz_clock_init().

Andi

>  {
>  	const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
>  	struct device *dev = wiz->dev;
> @@ -1087,14 +1087,36 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  	int ret;
>  	int i;
>  
> -	clk = devm_clk_get(dev, "core_ref_clk");
> -	if (IS_ERR(clk)) {
> -		dev_err(dev, "core_ref_clk clock not found\n");
> -		ret = PTR_ERR(clk);
> -		return ret;
> +	if (probe) {
> +		clk = devm_clk_get(dev, "core_ref_clk");
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "core_ref_clk clock not found\n");
> +			ret = PTR_ERR(clk);
> +			return ret;
> +		}
> +		wiz->input_clks[WIZ_CORE_REFCLK] = clk;
> +
> +		if (wiz->data->pma_cmn_refclk1_int_mode) {
> +			clk = devm_clk_get(dev, "core_ref1_clk");
> +			if (IS_ERR(clk)) {
> +				dev_err(dev, "core_ref1_clk clock not found\n");
> +				ret = PTR_ERR(clk);
> +				return ret;
> +			}
> +			wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
> +		}
> +
> +		clk = devm_clk_get(dev, "ext_ref_clk");
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "ext_ref_clk clock not found\n");
> +			ret = PTR_ERR(clk);
> +			return ret;
> +		}
> +		wiz->input_clks[WIZ_EXT_REFCLK] = clk;
>  	}
> -	wiz->input_clks[WIZ_CORE_REFCLK] = clk;
>  
> +
> +	clk = wiz->input_clks[WIZ_CORE_REFCLK];
>  	rate = clk_get_rate(clk);
>  	if (rate >= 100000000)
>  		regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1);
> @@ -1121,14 +1143,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  	}
>  
>  	if (wiz->data->pma_cmn_refclk1_int_mode) {
> -		clk = devm_clk_get(dev, "core_ref1_clk");
> -		if (IS_ERR(clk)) {
> -			dev_err(dev, "core_ref1_clk clock not found\n");
> -			ret = PTR_ERR(clk);
> -			return ret;
> -		}
> -		wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
> -
> +		clk = wiz->input_clks[WIZ_CORE_REFCLK1];
>  		rate = clk_get_rate(clk);
>  		if (rate >= 100000000)
>  			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1);
> @@ -1136,20 +1151,17 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
>  			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3);
>  	}
>  
> -	clk = devm_clk_get(dev, "ext_ref_clk");
> -	if (IS_ERR(clk)) {
> -		dev_err(dev, "ext_ref_clk clock not found\n");
> -		ret = PTR_ERR(clk);
> -		return ret;
> -	}
> -	wiz->input_clks[WIZ_EXT_REFCLK] = clk;
> -
> +	clk = wiz->input_clks[WIZ_EXT_REFCLK];
>  	rate = clk_get_rate(clk);
>  	if (rate >= 100000000)
>  		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0);
>  	else
>  		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2);
>  
> +	/* What follows is about registering clocks. */
> +	if (!probe)
> +		return 0;
> +
>  	switch (wiz->type) {
>  	case AM64_WIZ_10G:
>  	case J7200_WIZ_10G:
> @@ -1592,7 +1604,7 @@ static int wiz_probe(struct platform_device *pdev)
>  		goto err_get_sync;
>  	}
>  
> -	ret = wiz_clock_init(wiz, node);
> +	ret = wiz_clock_init(wiz, node, true);
>  	if (ret < 0) {
>  		dev_warn(dev, "Failed to initialize clocks\n");
>  		goto err_get_sync;
> 
> -- 
> 2.39.2
>
diff mbox series

Patch

diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index fc3cd98c60ff..09f7edf16562 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -1076,7 +1076,7 @@  static int wiz_clock_register(struct wiz *wiz)
 	return ret;
 }
 
-static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
+static int wiz_clock_init(struct wiz *wiz, struct device_node *node, bool probe)
 {
 	const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
 	struct device *dev = wiz->dev;
@@ -1087,14 +1087,36 @@  static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 	int ret;
 	int i;
 
-	clk = devm_clk_get(dev, "core_ref_clk");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "core_ref_clk clock not found\n");
-		ret = PTR_ERR(clk);
-		return ret;
+	if (probe) {
+		clk = devm_clk_get(dev, "core_ref_clk");
+		if (IS_ERR(clk)) {
+			dev_err(dev, "core_ref_clk clock not found\n");
+			ret = PTR_ERR(clk);
+			return ret;
+		}
+		wiz->input_clks[WIZ_CORE_REFCLK] = clk;
+
+		if (wiz->data->pma_cmn_refclk1_int_mode) {
+			clk = devm_clk_get(dev, "core_ref1_clk");
+			if (IS_ERR(clk)) {
+				dev_err(dev, "core_ref1_clk clock not found\n");
+				ret = PTR_ERR(clk);
+				return ret;
+			}
+			wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
+		}
+
+		clk = devm_clk_get(dev, "ext_ref_clk");
+		if (IS_ERR(clk)) {
+			dev_err(dev, "ext_ref_clk clock not found\n");
+			ret = PTR_ERR(clk);
+			return ret;
+		}
+		wiz->input_clks[WIZ_EXT_REFCLK] = clk;
 	}
-	wiz->input_clks[WIZ_CORE_REFCLK] = clk;
 
+
+	clk = wiz->input_clks[WIZ_CORE_REFCLK];
 	rate = clk_get_rate(clk);
 	if (rate >= 100000000)
 		regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1);
@@ -1121,14 +1143,7 @@  static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 	}
 
 	if (wiz->data->pma_cmn_refclk1_int_mode) {
-		clk = devm_clk_get(dev, "core_ref1_clk");
-		if (IS_ERR(clk)) {
-			dev_err(dev, "core_ref1_clk clock not found\n");
-			ret = PTR_ERR(clk);
-			return ret;
-		}
-		wiz->input_clks[WIZ_CORE_REFCLK1] = clk;
-
+		clk = wiz->input_clks[WIZ_CORE_REFCLK1];
 		rate = clk_get_rate(clk);
 		if (rate >= 100000000)
 			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1);
@@ -1136,20 +1151,17 @@  static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
 			regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3);
 	}
 
-	clk = devm_clk_get(dev, "ext_ref_clk");
-	if (IS_ERR(clk)) {
-		dev_err(dev, "ext_ref_clk clock not found\n");
-		ret = PTR_ERR(clk);
-		return ret;
-	}
-	wiz->input_clks[WIZ_EXT_REFCLK] = clk;
-
+	clk = wiz->input_clks[WIZ_EXT_REFCLK];
 	rate = clk_get_rate(clk);
 	if (rate >= 100000000)
 		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0);
 	else
 		regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2);
 
+	/* What follows is about registering clocks. */
+	if (!probe)
+		return 0;
+
 	switch (wiz->type) {
 	case AM64_WIZ_10G:
 	case J7200_WIZ_10G:
@@ -1592,7 +1604,7 @@  static int wiz_probe(struct platform_device *pdev)
 		goto err_get_sync;
 	}
 
-	ret = wiz_clock_init(wiz, node);
+	ret = wiz_clock_init(wiz, node, true);
 	if (ret < 0) {
 		dev_warn(dev, "Failed to initialize clocks\n");
 		goto err_get_sync;