| Message ID | 20240102-j7200-pcie-s2r-v4-7-6f1f53390c85@bootlin.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add suspend to ram support for PCIe on J7200 | expand |
On 04-03-24, 16:35, Thomas Richard wrote: > The wiz_clock_init() function mixes probe and hardware configuration. > Rename the wiz_clock_init() to wiz_clock_probe() and move the hardware > configuration part in a new function named wiz_clock_init(). > > This hardware configuration sequence must be called during the resume > stage of the driver. Do you have phy patches dependent on rest, if not consider submitting them in a separate series > > Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> > --- > drivers/phy/ti/phy-j721e-wiz.c | 67 ++++++++++++++++++++++++------------------ > 1 file changed, 38 insertions(+), 29 deletions(-) > > diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c > index 5fea4df9404e..0e3cb1ed5a52 100644 > --- a/drivers/phy/ti/phy-j721e-wiz.c > +++ b/drivers/phy/ti/phy-j721e-wiz.c > @@ -1076,26 +1076,12 @@ static int wiz_clock_register(struct wiz *wiz) > return ret; > } > > -static int wiz_clock_init(struct wiz *wiz, struct device_node *node) > +static void wiz_clock_init(struct wiz *wiz) > { > - const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel; > - struct device *dev = wiz->dev; > - struct device_node *clk_node; > - const char *node_name; > unsigned long rate; > - struct clk *clk; > - int ret; > - int i; > - > - clk = devm_clk_get(dev, "core_ref_clk"); > - if (IS_ERR(clk)) > - return dev_err_probe(dev, PTR_ERR(clk), > - "core_ref_clk clock not found\n"); > > - wiz->input_clks[WIZ_CORE_REFCLK] = clk; > - > - rate = clk_get_rate(clk); > - if (rate >= 100000000) > + rate = clk_get_rate(wiz->input_clks[WIZ_CORE_REFCLK]); > + if (rate >= REF_CLK_100MHZ) > regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1); > else > regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x3); > @@ -1119,6 +1105,39 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node) > break; > } > > + if (wiz->input_clks[WIZ_CORE_REFCLK1]) { > + rate = clk_get_rate(wiz->input_clks[WIZ_CORE_REFCLK1]); > + if (rate >= REF_CLK_100MHZ) > + regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1); > + else > + regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3); > + unnecessary empty line > + } > + > + rate = clk_get_rate(wiz->input_clks[WIZ_EXT_REFCLK]); > + if (rate >= REF_CLK_100MHZ) > + regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0); > + else > + regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2); > +} > + > +static int wiz_clock_probe(struct wiz *wiz, struct device_node *node) > +{ > + const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel; > + struct device *dev = wiz->dev; > + struct device_node *clk_node; > + const char *node_name; > + struct clk *clk; > + int ret; > + int i; > + > + clk = devm_clk_get(dev, "core_ref_clk"); > + if (IS_ERR(clk)) > + return dev_err_probe(dev, PTR_ERR(clk), > + "core_ref_clk clock not found\n"); > + > + wiz->input_clks[WIZ_CORE_REFCLK] = clk; > + > if (wiz->data->pma_cmn_refclk1_int_mode) { > clk = devm_clk_get(dev, "core_ref1_clk"); > if (IS_ERR(clk)) > @@ -1126,12 +1145,6 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node) > "core_ref1_clk clock not found\n"); > > wiz->input_clks[WIZ_CORE_REFCLK1] = clk; > - > - rate = clk_get_rate(clk); > - if (rate >= 100000000) > - regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1); > - else > - regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3); > } > > clk = devm_clk_get(dev, "ext_ref_clk"); > @@ -1141,11 +1154,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node) > > wiz->input_clks[WIZ_EXT_REFCLK] = clk; > > - rate = clk_get_rate(clk); > - if (rate >= 100000000) > - regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0); > - else > - regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2); > + wiz_clock_init(wiz); > > switch (wiz->type) { > case AM64_WIZ_10G: > @@ -1589,7 +1598,7 @@ static int wiz_probe(struct platform_device *pdev) > goto err_get_sync; > } > > - ret = wiz_clock_init(wiz, node); > + ret = wiz_clock_probe(wiz, node); > if (ret < 0) { > dev_warn(dev, "Failed to initialize clocks\n"); > goto err_get_sync; > > -- > 2.39.2
diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c index 5fea4df9404e..0e3cb1ed5a52 100644 --- a/drivers/phy/ti/phy-j721e-wiz.c +++ b/drivers/phy/ti/phy-j721e-wiz.c @@ -1076,26 +1076,12 @@ static int wiz_clock_register(struct wiz *wiz) return ret; } -static int wiz_clock_init(struct wiz *wiz, struct device_node *node) +static void wiz_clock_init(struct wiz *wiz) { - const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel; - struct device *dev = wiz->dev; - struct device_node *clk_node; - const char *node_name; unsigned long rate; - struct clk *clk; - int ret; - int i; - - clk = devm_clk_get(dev, "core_ref_clk"); - if (IS_ERR(clk)) - return dev_err_probe(dev, PTR_ERR(clk), - "core_ref_clk clock not found\n"); - wiz->input_clks[WIZ_CORE_REFCLK] = clk; - - rate = clk_get_rate(clk); - if (rate >= 100000000) + rate = clk_get_rate(wiz->input_clks[WIZ_CORE_REFCLK]); + if (rate >= REF_CLK_100MHZ) regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1); else regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x3); @@ -1119,6 +1105,39 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node) break; } + if (wiz->input_clks[WIZ_CORE_REFCLK1]) { + rate = clk_get_rate(wiz->input_clks[WIZ_CORE_REFCLK1]); + if (rate >= REF_CLK_100MHZ) + regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1); + else + regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3); + + } + + rate = clk_get_rate(wiz->input_clks[WIZ_EXT_REFCLK]); + if (rate >= REF_CLK_100MHZ) + regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0); + else + regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2); +} + +static int wiz_clock_probe(struct wiz *wiz, struct device_node *node) +{ + const struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel; + struct device *dev = wiz->dev; + struct device_node *clk_node; + const char *node_name; + struct clk *clk; + int ret; + int i; + + clk = devm_clk_get(dev, "core_ref_clk"); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), + "core_ref_clk clock not found\n"); + + wiz->input_clks[WIZ_CORE_REFCLK] = clk; + if (wiz->data->pma_cmn_refclk1_int_mode) { clk = devm_clk_get(dev, "core_ref1_clk"); if (IS_ERR(clk)) @@ -1126,12 +1145,6 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node) "core_ref1_clk clock not found\n"); wiz->input_clks[WIZ_CORE_REFCLK1] = clk; - - rate = clk_get_rate(clk); - if (rate >= 100000000) - regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x1); - else - regmap_field_write(wiz->pma_cmn_refclk1_int_mode, 0x3); } clk = devm_clk_get(dev, "ext_ref_clk"); @@ -1141,11 +1154,7 @@ static int wiz_clock_init(struct wiz *wiz, struct device_node *node) wiz->input_clks[WIZ_EXT_REFCLK] = clk; - rate = clk_get_rate(clk); - if (rate >= 100000000) - regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0); - else - regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2); + wiz_clock_init(wiz); switch (wiz->type) { case AM64_WIZ_10G: @@ -1589,7 +1598,7 @@ static int wiz_probe(struct platform_device *pdev) goto err_get_sync; } - ret = wiz_clock_init(wiz, node); + ret = wiz_clock_probe(wiz, node); if (ret < 0) { dev_warn(dev, "Failed to initialize clocks\n"); goto err_get_sync;
The wiz_clock_init() function mixes probe and hardware configuration. Rename the wiz_clock_init() to wiz_clock_probe() and move the hardware configuration part in a new function named wiz_clock_init(). This hardware configuration sequence must be called during the resume stage of the driver. Signed-off-by: Thomas Richard <thomas.richard@bootlin.com> --- drivers/phy/ti/phy-j721e-wiz.c | 67 ++++++++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 29 deletions(-)