diff mbox series

[RFC,7/9] dt-bindings: wireless: ath11k: describe QCA6390

Message ID 20240104130123.37115-8-brgl@bgdev.pl (mailing list archive)
State New, archived
Headers show
Series PCI: introduce the concept of power sequencing of PCIe devices | expand

Commit Message

Bartosz Golaszewski Jan. 4, 2024, 1:01 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Describe the ath11k variant present on the QCA6390 module.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 .../bindings/net/wireless/qcom,ath11k-pci.yaml     | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Krzysztof Kozlowski Jan. 4, 2024, 3:57 p.m. UTC | #1
On 04/01/2024 14:01, Bartosz Golaszewski wrote:
> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
> index 817f02a8b481..f584c25f4276 100644
> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
> @@ -16,6 +16,7 @@ description: |
>  properties:
>    compatible:
>      enum:
> +      - pci17cb,1101  # QCA6390
>        - pci17cb,1103  # WCN6855
>  
>    reg:
> @@ -27,6 +28,19 @@ properties:
>        string to uniquely identify variant of the calibration data for designs
>        with colliding bus and device ids
>  
> +  enable-gpios:
> +    description: GPIO line enabling the ATH11K module when asserted.
> +    maxItems: 1
> +
> +  vddpmu-supply:
> +    description: VDD_PMU supply regulator handle
> +
> +  vddpcie1-supply:
> +    description: VDD_PCIE1 supply regulator handle
> +
> +  vddpcie2-supply:
> +    description: VDD_PCIE2 supply regulator handle

Looks like these are valid only for specific variant, so you should have
allOf:if:then disallowing other properties when not applicable. The same
applies for existing properties which might not exist on qca6390.

Best regards,
Krzysztof
Kalle Valo Jan. 9, 2024, 9:13 a.m. UTC | #2
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> writes:

> On 04/01/2024 14:01, Bartosz Golaszewski wrote:
>
>> diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
>> index 817f02a8b481..f584c25f4276 100644
>> --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
>> +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
>> @@ -16,6 +16,7 @@ description: |
>>  properties:
>>    compatible:
>>      enum:
>> +      - pci17cb,1101  # QCA6390
>>        - pci17cb,1103  # WCN6855
>>  
>>    reg:
>> @@ -27,6 +28,19 @@ properties:
>>        string to uniquely identify variant of the calibration data for designs
>>        with colliding bus and device ids
>>  
>> +  enable-gpios:
>> +    description: GPIO line enabling the ATH11K module when asserted.
>> +    maxItems: 1
>> +
>> +  vddpmu-supply:
>> +    description: VDD_PMU supply regulator handle
>> +
>> +  vddpcie1-supply:
>> +    description: VDD_PCIE1 supply regulator handle
>> +
>> +  vddpcie2-supply:
>> +    description: VDD_PCIE2 supply regulator handle
>
> Looks like these are valid only for specific variant, so you should have
> allOf:if:then disallowing other properties when not applicable. The same
> applies for existing properties which might not exist on qca6390.

And it would be good to provide more information in the commit log about
the platforms where this is used, otherwise the context might not be
clear. Or maybe document that in the bindings file, not sure.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
index 817f02a8b481..f584c25f4276 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml
@@ -16,6 +16,7 @@  description: |
 properties:
   compatible:
     enum:
+      - pci17cb,1101  # QCA6390
       - pci17cb,1103  # WCN6855
 
   reg:
@@ -27,6 +28,19 @@  properties:
       string to uniquely identify variant of the calibration data for designs
       with colliding bus and device ids
 
+  enable-gpios:
+    description: GPIO line enabling the ATH11K module when asserted.
+    maxItems: 1
+
+  vddpmu-supply:
+    description: VDD_PMU supply regulator handle
+
+  vddpcie1-supply:
+    description: VDD_PCIE1 supply regulator handle
+
+  vddpcie2-supply:
+    description: VDD_PCIE2 supply regulator handle
+
 required:
   - compatible
   - reg