| Message ID | 20240105142719.11042-3-ansuelsmth@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | net: phy: generic polarity + LED support for qca808x | expand |
On Fri, Jan 05, 2024 at 03:27:14PM +0100, Christian Marangi wrote: > Document LED inactive high impedance mode to set the LED to require high > impedance configuration to be turned OFF. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Andrew
On Tue, 09 Jan 2024, Andrew Lunn wrote: > On Fri, Jan 05, 2024 at 03:27:14PM +0100, Christian Marangi wrote: > > Document LED inactive high impedance mode to set the LED to require high > > impedance configuration to be turned OFF. > > > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > > Reviewed-by: Andrew Lunn <andrew@lunn.ch> If the DT Maintainers are happy, so am I. Acked-by: Lee Jones <lee@kernel.org>
On Fri, 05 Jan 2024 15:27:14 +0100, Christian Marangi wrote: > Document LED inactive high impedance mode to set the LED to require high > impedance configuration to be turned OFF. > > Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> > --- > Changes v5: > - Add this patch > > Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ > 1 file changed, 6 insertions(+) > Reviewed-by: Rob Herring <robh@kernel.org>
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index f5b40df6b421..9e7b4aabe0bb 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -206,6 +206,12 @@ properties: Makes LED active low. To turn the LED ON, line needs to be set to low voltage instead of high. + inactive-high-impedance: + type: boolean + description: + Set LED to high-impedance mode to turn the LED OFF. LED might also + describe this mode as tristate. + # Required properties for flash LED child nodes: flash-max-microamp: description:
Document LED inactive high impedance mode to set the LED to require high impedance configuration to be turned OFF. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- Changes v5: - Add this patch Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++ 1 file changed, 6 insertions(+)