| Message ID | 20240110213504.3626468-3-tanmay.shah@amd.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | add zynqmp TCM bindings | expand |
On 1/10/24 22:35, Tanmay Shah wrote: > Add properties as per new bindings in zynqmp remoteproc node > to represent TCM address and size. > > This patch also adds alternative remoteproc node to represent > remoteproc cluster in split mode. By default lockstep mode is > enabled and users should disable it before using split mode > dts. Both device-tree nodes can't be used simultaneously one > of them must be disabled. For zcu102-1.0 and zcu102-1.1 board > remoteproc split mode dts node is enabled and lockstep mode > dts is disabled. > > Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> > --- > > Changes in v9: > - fix rproc lockstep dts > > > .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +++ > arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 58 +++++++++++++++++-- > 2 files changed, 61 insertions(+), 5 deletions(-) > > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts > index c8f71a1aec89..495ca94b45db 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts > +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts > @@ -14,6 +14,14 @@ / { > compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; > }; > +&rproc_split { > + status = "okay"; > +}; > + > +&rproc_lockstep { > + status = "disabled"; > +}; > + > &eeprom { > #address-cells = <1>; > #size-cells = <1>; > diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > index b61fc99cd911..cfdd1f68501f 100644 > --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi > @@ -247,19 +247,67 @@ fpga_full: fpga-full { > ranges; > }; > > - remoteproc { > + rproc_lockstep: remoteproc@ffe00000 { > compatible = "xlnx,zynqmp-r5fss"; > xlnx,cluster-mode = <1>; > > - r5f-0 { > + #address-cells = <2>; > + #size-cells = <2>; > + > + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x20000>, > + <0x0 0x20000 0x0 0xffe20000 0x0 0x20000>; > + > + r5f@0 { > + compatible = "xlnx,zynqmp-r5f"; > + reg = <0x0 0x0 0x0 0x20000>, <0x0 0x20000 0x0 0x20000>; > + reg-names = "atcm", "btcm"; > + power-domains = <&zynqmp_firmware PD_RPU_0>, > + <&zynqmp_firmware PD_R5_0_ATCM>, > + <&zynqmp_firmware PD_R5_0_BTCM>; > + memory-region = <&rproc_0_fw_image>; > + }; > + > + r5f@1 { > + compatible = "xlnx,zynqmp-r5f"; > + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; > + reg-names = "atcm", "btcm"; > + power-domains = <&zynqmp_firmware PD_RPU_1>, > + <&zynqmp_firmware PD_R5_1_ATCM>, > + <&zynqmp_firmware PD_R5_1_BTCM>; > + memory-region = <&rproc_1_fw_image>; > + }; > + }; > + > + rproc_split: remoteproc-split@ffe00000 { > + status = "disabled"; > + compatible = "xlnx,zynqmp-r5fss"; > + xlnx,cluster-mode = <0>; > + > + #address-cells = <2>; > + #size-cells = <2>; > + > + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, > + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, > + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>, > + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>; > + > + r5f@0 { > compatible = "xlnx,zynqmp-r5f"; > - power-domains = <&zynqmp_firmware PD_RPU_0>; > + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>; > + reg-names = "atcm", "btcm"; > + power-domains = <&zynqmp_firmware PD_RPU_0>, > + <&zynqmp_firmware PD_R5_0_ATCM>, > + <&zynqmp_firmware PD_R5_0_BTCM>; > memory-region = <&rproc_0_fw_image>; > }; > > - r5f-1 { > + r5f@1 { > compatible = "xlnx,zynqmp-r5f"; > - power-domains = <&zynqmp_firmware PD_RPU_1>; > + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; > + reg-names = "atcm", "btcm"; > + power-domains = <&zynqmp_firmware PD_RPU_1>, > + <&zynqmp_firmware PD_R5_1_ATCM>, > + <&zynqmp_firmware PD_R5_1_BTCM>; > memory-region = <&rproc_1_fw_image>; > }; > }; Acked-by: Michal Simek <michal.simek@amd.com> Thanks, Michal
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts index c8f71a1aec89..495ca94b45db 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts +++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts @@ -14,6 +14,14 @@ / { compatible = "xlnx,zynqmp-zcu102-rev1.0", "xlnx,zynqmp-zcu102", "xlnx,zynqmp"; }; +&rproc_split { + status = "okay"; +}; + +&rproc_lockstep { + status = "disabled"; +}; + &eeprom { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi index b61fc99cd911..cfdd1f68501f 100644 --- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi +++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi @@ -247,19 +247,67 @@ fpga_full: fpga-full { ranges; }; - remoteproc { + rproc_lockstep: remoteproc@ffe00000 { compatible = "xlnx,zynqmp-r5fss"; xlnx,cluster-mode = <1>; - r5f-0 { + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x20000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x20000>; + + r5f@0 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x0 0x0 0x0 0x20000>, <0x0 0x20000 0x0 0x20000>; + reg-names = "atcm", "btcm"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>; + memory-region = <&rproc_0_fw_image>; + }; + + r5f@1 { + compatible = "xlnx,zynqmp-r5f"; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm", "btcm"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; + memory-region = <&rproc_1_fw_image>; + }; + }; + + rproc_split: remoteproc-split@ffe00000 { + status = "disabled"; + compatible = "xlnx,zynqmp-r5fss"; + xlnx,cluster-mode = <0>; + + #address-cells = <2>; + #size-cells = <2>; + + ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>, + <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>, + <0x1 0x0 0x0 0xffe90000 0x0 0x10000>, + <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>; + + r5f@0 { compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware PD_RPU_0>; + reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>; + reg-names = "atcm", "btcm"; + power-domains = <&zynqmp_firmware PD_RPU_0>, + <&zynqmp_firmware PD_R5_0_ATCM>, + <&zynqmp_firmware PD_R5_0_BTCM>; memory-region = <&rproc_0_fw_image>; }; - r5f-1 { + r5f@1 { compatible = "xlnx,zynqmp-r5f"; - power-domains = <&zynqmp_firmware PD_RPU_1>; + reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>; + reg-names = "atcm", "btcm"; + power-domains = <&zynqmp_firmware PD_RPU_1>, + <&zynqmp_firmware PD_R5_1_ATCM>, + <&zynqmp_firmware PD_R5_1_BTCM>; memory-region = <&rproc_1_fw_image>; }; };
Add properties as per new bindings in zynqmp remoteproc node to represent TCM address and size. This patch also adds alternative remoteproc node to represent remoteproc cluster in split mode. By default lockstep mode is enabled and users should disable it before using split mode dts. Both device-tree nodes can't be used simultaneously one of them must be disabled. For zcu102-1.0 and zcu102-1.1 board remoteproc split mode dts node is enabled and lockstep mode dts is disabled. Signed-off-by: Tanmay Shah <tanmay.shah@amd.com> --- Changes in v9: - fix rproc lockstep dts .../boot/dts/xilinx/zynqmp-zcu102-rev1.0.dts | 8 +++ arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 58 +++++++++++++++++-- 2 files changed, 61 insertions(+), 5 deletions(-)