| Message ID | 20240117075618.81932-1-krzysztof.kozlowski@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] dt-bindings: i3c: drop "master" node name suffix | expand |
Hi Krzysztof, > Drop the requirement of "-master" suffix in node names because: > 1. "Master" word is discouraged and MIPI Alliance renamed it to > "Controller". > 2. Some devices can operate in Controller (Master) or Target mode, > thus the name is not accurate in such cases. > 3. Other buses, like I2C controllers, use simple "i2c". Sounds good, thanks! For the ast2600-i3c changes: Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Cheers, Jeremy
On Wed, Jan 17, 2024 at 08:56:16AM +0100, Krzysztof Kozlowski wrote: > Drop the requirement of "-master" suffix in node names because: > 1. "Master" word is discouraged and MIPI Alliance renamed it to > "Controller". > 2. Some devices can operate in Controller (Master) or Target mode, thus > the name is not accurate in such cases. > 3. Other buses, like I2C controllers, use simple "i2c". > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Cheers, Conor.
On 17/01/2024 08:56, Krzysztof Kozlowski wrote: > Drop the requirement of "-master" suffix in node names because: > 1. "Master" word is discouraged and MIPI Alliance renamed it to > "Controller". > 2. Some devices can operate in Controller (Master) or Target mode, thus > the name is not accurate in such cases. > 3. Other buses, like I2C controllers, use simple "i2c". > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- Rob, can you pick this one up? It seems Alexandre did not take it. Best regards, Krzysztof
On 16/02/2024 12:26:12+0100, Krzysztof Kozlowski wrote: > On 17/01/2024 08:56, Krzysztof Kozlowski wrote: > > Drop the requirement of "-master" suffix in node names because: > > 1. "Master" word is discouraged and MIPI Alliance renamed it to > > "Controller". > > 2. Some devices can operate in Controller (Master) or Target mode, thus > > the name is not accurate in such cases. > > 3. Other buses, like I2C controllers, use simple "i2c". > > > > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > > --- > > Rob, can you pick this one up? It seems Alexandre did not take it. > I'll take it but I don't think it is super urgent.
On 17/02/2024 13:42, Alexandre Belloni wrote: > On 16/02/2024 12:26:12+0100, Krzysztof Kozlowski wrote: >> On 17/01/2024 08:56, Krzysztof Kozlowski wrote: >>> Drop the requirement of "-master" suffix in node names because: >>> 1. "Master" word is discouraged and MIPI Alliance renamed it to >>> "Controller". >>> 2. Some devices can operate in Controller (Master) or Target mode, thus >>> the name is not accurate in such cases. >>> 3. Other buses, like I2C controllers, use simple "i2c". >>> >>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> >>> --- >> >> Rob, can you pick this one up? It seems Alexandre did not take it. >> > > I'll take it but I don't think it is super urgent. It's not, but it was almost two weeks and we are also getting to end of applying cycle of some maintainers, so I was going through my pending stuff. Apologies if this was too pingi-ping. Best regards, Krzysztof
On Wed, 17 Jan 2024 08:56:16 +0100, Krzysztof Kozlowski wrote: > Drop the requirement of "-master" suffix in node names because: > 1. "Master" word is discouraged and MIPI Alliance renamed it to > "Controller". > 2. Some devices can operate in Controller (Master) or Target mode, thus > the name is not accurate in such cases. > 3. Other buses, like I2C controllers, use simple "i2c". > > [...] Applied, thanks! [1/3] dt-bindings: i3c: drop "master" node name suffix https://git.kernel.org/abelloni/c/c53611f2e27a Best regards,
diff --git a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml index fcc3dbff9c9a..47be5d9a32d4 100644 --- a/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml @@ -57,7 +57,7 @@ examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - i3c-master@2000 { + i3c@2000 { compatible = "aspeed,ast2600-i3c"; reg = <0x2000 0x1000>; #address-cells = <3>; diff --git a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml index cc40d25358ec..cad6d53d0e2e 100644 --- a/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml @@ -41,7 +41,7 @@ unevaluatedProperties: false examples: - | - i3c-master@d040000 { + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; clock-names = "pclk", "sysclk"; diff --git a/Documentation/devicetree/bindings/i3c/i3c.yaml b/Documentation/devicetree/bindings/i3c/i3c.yaml index c816e295d565..c7900a1da8d9 100644 --- a/Documentation/devicetree/bindings/i3c/i3c.yaml +++ b/Documentation/devicetree/bindings/i3c/i3c.yaml @@ -17,7 +17,7 @@ description: | properties: $nodename: - pattern: "^i3c-master@[0-9a-f]+$" + pattern: "^i3c@[0-9a-f]+$" "#address-cells": const: 3 @@ -153,7 +153,7 @@ additionalProperties: true examples: - | - i3c-master@d040000 { + i3c@d040000 { compatible = "cdns,i3c-master"; clocks = <&coreclock>, <&i3csysclock>; clock-names = "pclk", "sysclk"; diff --git a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml index 5dda8cb44cdb..39bb1a1784c9 100644 --- a/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml +++ b/Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml @@ -43,7 +43,7 @@ unevaluatedProperties: false examples: - | - i3c-master@a0000000 { + i3c@a0000000 { compatible = "mipi-i3c-hci"; reg = <0xa0000000 0x2000>; interrupts = <89>; diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index 133855f11b4f..c56ff77677f1 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -48,7 +48,7 @@ unevaluatedProperties: false examples: - | - i3c-master@a0000000 { + i3c@a0000000 { compatible = "silvaco,i3c-master-v1"; clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>; clock-names = "pclk", "fast_clk", "slow_clk"; diff --git a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml index 7a76fd32962a..c0e805e531be 100644 --- a/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml @@ -35,7 +35,7 @@ unevaluatedProperties: false examples: - | - i3c-master@2000 { + i3c@2000 { compatible = "snps,dw-i3c-master-1.00a"; #address-cells = <3>; #size-cells = <0>;
Drop the requirement of "-master" suffix in node names because: 1. "Master" word is discouraged and MIPI Alliance renamed it to "Controller". 2. Some devices can operate in Controller (Master) or Target mode, thus the name is not accurate in such cases. 3. Other buses, like I2C controllers, use simple "i2c". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- Documentation/devicetree/bindings/i3c/aspeed,ast2600-i3c.yaml | 2 +- Documentation/devicetree/bindings/i3c/cdns,i3c-master.yaml | 2 +- Documentation/devicetree/bindings/i3c/i3c.yaml | 4 ++-- Documentation/devicetree/bindings/i3c/mipi-i3c-hci.yaml | 2 +- Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml | 2 +- Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml | 2 +- 6 files changed, 7 insertions(+), 7 deletions(-)