diff mbox series

[v2,2/5] arm64: dts: ti: k3-j784s4: Add Main CPSW2G node

Message ID 20240118094454.2656734-3-c-vankar@ti.com (mailing list archive)
State New, archived
Headers show
Series Add CPSW2G and CPSW9G nodes for J784S4 | expand

Commit Message

Chintan Vankar Jan. 18, 2024, 9:44 a.m. UTC
From: Siddharth Vadapalli <s-vadapalli@ti.com>

J784S4 SoC has a Main CPSW2G instance of the CPSW Ethernet Switch.

Add the device-tree nodes for the Main CPSW2G instance and enable it.

Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
---
 arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 47 +++++++++++++++
 arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 68 ++++++++++++++++++++++
 2 files changed, 115 insertions(+)

Comments

Nishanth Menon Jan. 19, 2024, 1:18 p.m. UTC | #1
On 15:14-20240118, Chintan Vankar wrote:
> From: Siddharth Vadapalli <s-vadapalli@ti.com>
> 
> J784S4 SoC has a Main CPSW2G instance of the CPSW Ethernet Switch.
> 
> Add the device-tree nodes for the Main CPSW2G instance and enable it.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
> Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
> Signed-off-by: Chintan Vankar <c-vankar@ti.com>
> ---
>  arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 47 +++++++++++++++
>  arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 68 ++++++++++++++++++++++
>  2 files changed, 115 insertions(+)

Please do not mix the SoC and evm changes in the same patch.
Also, any benefits of giving the second instance an alias?

> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index f34b92acc56d..826367ffa3f2 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -279,6 +279,29 @@ &wkup_gpio0 {
>  
>  &main_pmx0 {
>  	bootph-all;
> +	main_cpsw2g_default_pins: main-cpsw2g-default-pins {
> +		pinctrl-single,pins = <
> +			J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
> +			J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
> +			J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
> +			J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
> +			J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
> +			J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
> +			J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
> +			J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
> +			J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
> +			J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
> +			J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
> +			J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
> +		>;
> +	};
> +
> +	main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
> +		pinctrl-single,pins = <
> +			J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
> +			J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
> +		>;
> +	};
>  	main_uart8_pins_default: main-uart8-default-pins {
>  		bootph-all;
>  		pinctrl-single,pins = <
> @@ -808,6 +831,30 @@ &mcu_cpsw_port1 {
>  	phy-handle = <&mcu_phy0>;
>  };
>  
> +&main_cpsw1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_cpsw2g_default_pins>;
> +};
> +
> +&main_cpsw1_mdio {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
> +
> +	main_cpsw1_phy0: ethernet-phy@0 {
> +		reg = <0>;
> +		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
> +		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
> +		ti,min-output-impedance;
> +	};
> +};
> +
> +&main_cpsw1_port1 {
> +	status = "okay";
> +	phy-mode = "rgmii-rxid";
> +	phy-handle = <&main_cpsw1_phy0>;
> +};
> +
>  &mailbox0_cluster0 {
>  	status = "okay";
>  	interrupts = <436>;
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> index 56c8eaad6324..191fdbe02877 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
> @@ -48,6 +48,12 @@ scm_conf: bus@100000 {
>  		#size-cells = <1>;
>  		ranges = <0x00 0x00 0x00100000 0x1c000>;
>  
> +		cpsw1_phy_gmii_sel: phy@4034 {
> +			compatible = "ti,am654-phy-gmii-sel";
> +			reg = <0x4034 0x4>;
> +			#phy-cells = <1>;
> +		};
> +
>  		serdes_ln_ctrl: mux-controller@4080 {
>  			compatible = "reg-mux";
>  			reg = <0x00004080 0x30>;
> @@ -1242,6 +1248,68 @@ cpts@310d0000 {
>  		};
>  	};
>  
> +	main_cpsw1: ethernet@c200000 {
> +		compatible = "ti,j721e-cpsw-nuss";
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		reg = <0x00 0xc200000 0x00 0x200000>;
> +		reg-names = "cpsw_nuss";
> +		ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>;
> +		dma-coherent;
> +		clocks = <&k3_clks 62 0>;
> +		clock-names = "fck";
> +		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
> +
> +		dmas = <&main_udmap 0xc640>,
> +		       <&main_udmap 0xc641>,
> +		       <&main_udmap 0xc642>,
> +		       <&main_udmap 0xc643>,
> +		       <&main_udmap 0xc644>,
> +		       <&main_udmap 0xc645>,
> +		       <&main_udmap 0xc646>,
> +		       <&main_udmap 0xc647>,
> +		       <&main_udmap 0x4640>;
> +		dma-names = "tx0", "tx1", "tx2", "tx3",
> +			    "tx4", "tx5", "tx6", "tx7",
> +			    "rx";
> +
> +		status = "disabled";
> +
> +		ethernet-ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			main_cpsw1_port1: port@1 {
> +				reg = <1>;
> +				label = "port1";
> +				phys = <&cpsw1_phy_gmii_sel 1>;
> +				ti,mac-only;
> +				status = "disabled";
> +			};
> +		};
> +
> +		main_cpsw1_mdio: mdio@f00 {
> +			compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
> +			reg = <0x00 0xf00 0x00 0x100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			clocks = <&k3_clks 62 0>;
> +			clock-names = "fck";
> +			bus_freq = <1000000>;
> +		};
> +
> +		cpts@3d000 {
> +			compatible = "ti,am65-cpts";
> +			reg = <0x00 0x3d000 0x00 0x400>;
> +			clocks = <&k3_clks 62 3>;
> +			clock-names = "cpts";
> +			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "cpts";
> +			ti,cpts-ext-ts-inputs = <4>;
> +			ti,cpts-periodic-outputs = <2>;
> +		};
> +	};
> +
>  	main_mcan0: can@2701000 {
>  		compatible = "bosch,m_can";
>  		reg = <0x00 0x02701000 0x00 0x200>,
> -- 
> 2.34.1
Nishanth Menon Jan. 25, 2024, 1:44 p.m. UTC | #2
On 15:02-20240125, Chintan Vankar wrote:
> 
> On 19/01/24 18:48, Nishanth Menon wrote:
> > On 15:14-20240118, Chintan Vankar wrote:
> > > From: Siddharth Vadapalli<s-vadapalli@ti.com>
> > > 
> > > J784S4 SoC has a Main CPSW2G instance of the CPSW Ethernet Switch.
> > > 
> > > Add the device-tree nodes for the Main CPSW2G instance and enable it.
> > > 
> > > Signed-off-by: Siddharth Vadapalli<s-vadapalli@ti.com>
> > > Signed-off-by: Jayesh Choudhary<j-choudhary@ti.com>
> > > Signed-off-by: Chintan Vankar<c-vankar@ti.com>
> > > ---
> > >   arch/arm64/boot/dts/ti/k3-j784s4-evm.dts   | 47 +++++++++++++++
> > >   arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 68 ++++++++++++++++++++++
> > >   2 files changed, 115 insertions(+)
> > Please do not mix the SoC and evm changes in the same patch.
> Okay. I will separate them in the v3 series
> > Also, any benefits of giving the second instance an alias?
> 
> Yes, there are benefits of adding an alias,
> 
> I will add aliases for both Main and MCU cpsw2g,
> 
> and post it in a future series.

If there is benefit, squash to current patch.
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index f34b92acc56d..826367ffa3f2 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -279,6 +279,29 @@  &wkup_gpio0 {
 
 &main_pmx0 {
 	bootph-all;
+	main_cpsw2g_default_pins: main-cpsw2g-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0b8, PIN_INPUT, 6) /* (AC34) MCASP1_ACLKX.RGMII1_RD0 */
+			J784S4_IOPAD(0x0a0, PIN_INPUT, 6) /* (AD34) MCASP0_AXR12.RGMII1_RD1 */
+			J784S4_IOPAD(0x0a4, PIN_INPUT, 6) /* (AJ36) MCASP0_AXR13.RGMII1_RD2 */
+			J784S4_IOPAD(0x0a8, PIN_INPUT, 6) /* (AF34) MCASP0_AXR14.RGMII1_RD3 */
+			J784S4_IOPAD(0x0b0, PIN_INPUT, 6) /* (AL33) MCASP1_AXR3.RGMII1_RXC */
+			J784S4_IOPAD(0x0ac, PIN_INPUT, 6) /* (AE34) MCASP0_AXR15.RGMII1_RX_CTL */
+			J784S4_IOPAD(0x08c, PIN_INPUT, 6) /* (AE35) MCASP0_AXR7.RGMII1_TD0 */
+			J784S4_IOPAD(0x090, PIN_INPUT, 6) /* (AC35) MCASP0_AXR8.RGMII1_TD1 */
+			J784S4_IOPAD(0x094, PIN_INPUT, 6) /* (AG35) MCASP0_AXR9.RGMII1_TD2 */
+			J784S4_IOPAD(0x098, PIN_INPUT, 6) /* (AH36) MCASP0_AXR10.RGMII1_TD3 */
+			J784S4_IOPAD(0x0b4, PIN_INPUT, 6) /* (AL34) MCASP1_AXR4.RGMII1_TXC */
+			J784S4_IOPAD(0x09c, PIN_INPUT, 6) /* (AF35) MCASP0_AXR11.RGMII1_TX_CTL */
+		>;
+	};
+
+	main_cpsw2g_mdio_default_pins: main-cpsw2g-mdio-default-pins {
+		pinctrl-single,pins = <
+			J784S4_IOPAD(0x0c0, PIN_INPUT, 6) /* (AD38) MCASP1_AXR0.MDIO0_MDC */
+			J784S4_IOPAD(0x0bc, PIN_INPUT, 6) /* (AD33) MCASP1_AFSX.MDIO0_MDIO */
+		>;
+	};
 	main_uart8_pins_default: main-uart8-default-pins {
 		bootph-all;
 		pinctrl-single,pins = <
@@ -808,6 +831,30 @@  &mcu_cpsw_port1 {
 	phy-handle = <&mcu_phy0>;
 };
 
+&main_cpsw1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw2g_default_pins>;
+};
+
+&main_cpsw1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_cpsw2g_mdio_default_pins>;
+
+	main_cpsw1_phy0: ethernet-phy@0 {
+		reg = <0>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&main_cpsw1_port1 {
+	status = "okay";
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&main_cpsw1_phy0>;
+};
+
 &mailbox0_cluster0 {
 	status = "okay";
 	interrupts = <436>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index 56c8eaad6324..191fdbe02877 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -48,6 +48,12 @@  scm_conf: bus@100000 {
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
 
+		cpsw1_phy_gmii_sel: phy@4034 {
+			compatible = "ti,am654-phy-gmii-sel";
+			reg = <0x4034 0x4>;
+			#phy-cells = <1>;
+		};
+
 		serdes_ln_ctrl: mux-controller@4080 {
 			compatible = "reg-mux";
 			reg = <0x00004080 0x30>;
@@ -1242,6 +1248,68 @@  cpts@310d0000 {
 		};
 	};
 
+	main_cpsw1: ethernet@c200000 {
+		compatible = "ti,j721e-cpsw-nuss";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		reg = <0x00 0xc200000 0x00 0x200000>;
+		reg-names = "cpsw_nuss";
+		ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>;
+		dma-coherent;
+		clocks = <&k3_clks 62 0>;
+		clock-names = "fck";
+		power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+
+		dmas = <&main_udmap 0xc640>,
+		       <&main_udmap 0xc641>,
+		       <&main_udmap 0xc642>,
+		       <&main_udmap 0xc643>,
+		       <&main_udmap 0xc644>,
+		       <&main_udmap 0xc645>,
+		       <&main_udmap 0xc646>,
+		       <&main_udmap 0xc647>,
+		       <&main_udmap 0x4640>;
+		dma-names = "tx0", "tx1", "tx2", "tx3",
+			    "tx4", "tx5", "tx6", "tx7",
+			    "rx";
+
+		status = "disabled";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			main_cpsw1_port1: port@1 {
+				reg = <1>;
+				label = "port1";
+				phys = <&cpsw1_phy_gmii_sel 1>;
+				ti,mac-only;
+				status = "disabled";
+			};
+		};
+
+		main_cpsw1_mdio: mdio@f00 {
+			compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+			reg = <0x00 0xf00 0x00 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&k3_clks 62 0>;
+			clock-names = "fck";
+			bus_freq = <1000000>;
+		};
+
+		cpts@3d000 {
+			compatible = "ti,am65-cpts";
+			reg = <0x00 0x3d000 0x00 0x400>;
+			clocks = <&k3_clks 62 3>;
+			clock-names = "cpts";
+			interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "cpts";
+			ti,cpts-ext-ts-inputs = <4>;
+			ti,cpts-periodic-outputs = <2>;
+		};
+	};
+
 	main_mcan0: can@2701000 {
 		compatible = "bosch,m_can";
 		reg = <0x00 0x02701000 0x00 0x200>,