new file mode 100644
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nuvoton,ma35d1-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Nuvoton MA35D1 pin control and GPIO
+
+maintainers:
+ - Shan-Chun Hung <schung@nuvoton.com>
+ - Jacky Huang <ychuang3@nuvoton.com>
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+properties:
+ compatible:
+ enum:
+ - nuvoton,ma35d1-pinctrl
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
+ nuvoton,sys:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ phandle of the system-management node.
+
+ ranges: true
+
+patternProperties:
+ "^gpio@[0-9a-f]+$":
+ type: object
+ additionalProperties: false
+ properties:
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ interrupts:
+ description:
+ The interrupt outputs to sysirq.
+ maxItems: 1
+
+ required:
+ - gpio-controller
+ - '#gpio-cells'
+ - reg
+ - clocks
+ - interrupt-controller
+ - '#interrupt-cells'
+ - interrupts
+
+ "^pin-[a-z0-9]+$":
+ type: object
+ description:
+ A pinctrl node should contain at least one subnodes representing the
+ pinctrl groups available on the machine. Each subnode will list the
+ pins it needs, and how they should be configured, with regard to muxer
+ configuration, pullups, drive strength, input enable/disable and input
+ schmitt.
+
+ $ref: pincfg-node.yaml#
+
+ properties:
+ power-source:
+ description: |
+ Valid arguments are described as below:
+ 0: power supply of 1.8V
+ 1: power supply of 3.3V
+ enum: [0, 1]
+
+ drive-strength-microamp:
+ oneOf:
+ - enum: [ 2900, 4400, 5800, 7300, 8600, 10100, 11500, 13000 ]
+ description: 1.8V I/O driving strength
+ - enum: [ 17100, 25600, 34100, 42800, 48000, 56000, 77000, 82000 ]
+ description: 3.3V I/O driving strength
+
+ unevaluatedProperties: false
+
+ "-grp$":
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ properties:
+ nuvoton,pins:
+ description:
+ Each entry consists of 4 parameters and represents the mux and config
+ setting for one pin.
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ minItems: 1
+ items:
+ items:
+ - minimum: 0
+ maximum: 13
+ description:
+ Pin bank.
+ - minimum: 0
+ maximum: 15
+ description:
+ Pin bank index.
+ - minimum: 0
+ maximum: 15
+ description:
+ Mux 0 means GPIO and mux 1 to 15 means the specific device function.
+
+required:
+ - compatible
+ - nuvoton,sys
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
+
+ pinctrl@40040000 {
+ compatible = "nuvoton,ma35d1-pinctrl";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nuvoton,sys = <&sys>;
+ ranges = <0 0x40040000 0xc00>;
+
+ gpio@0 {
+ reg = <0x0 0x40>;
+ interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk GPA_GATE>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart-grp {
+ uart11-pins {
+ nuvoton,pins = <11 0 2>,
+ <11 1 2>,
+ <11 2 2>,
+ <11 3 2>;
+ bias-disable;
+ power-source = <1>;
+ };
+ };
+ };