@@ -1475,6 +1475,8 @@ static const struct sfp_upstream_ops at8031_sfp_ops = {
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
.module_insert = at8031_sfp_insert,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int at8031_parse_dt(struct phy_device *phydev)
@@ -555,6 +555,8 @@ static const struct sfp_upstream_ops sfp_phy_ops = {
.link_down = mv2222_sfp_link_down,
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int mv2222_probe(struct phy_device *phydev)
@@ -3254,6 +3254,8 @@ static const struct sfp_upstream_ops m88e1510_sfp_ops = {
.module_remove = m88e1510_sfp_remove,
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
};
static int m88e1510_probe(struct phy_device *phydev)
@@ -503,6 +503,8 @@ static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
static const struct sfp_upstream_ops mv3310_sfp_ops = {
.attach = phy_sfp_attach,
.detach = phy_sfp_detach,
+ .connect_phy = phy_sfp_connect_phy,
+ .disconnect_phy = phy_sfp_disconnect_phy,
.module_insert = mv3310_sfp_insert,
};
@@ -266,6 +266,14 @@ static void phy_mdio_device_remove(struct mdio_device *mdiodev)
static struct phy_driver genphy_driver;
+static struct phy_link_topology *phy_get_link_topology(struct phy_device *phydev)
+{
+ if (phydev->attached_dev)
+ return phydev->attached_dev->link_topo;
+
+ return NULL;
+}
+
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
@@ -1355,6 +1363,46 @@ phy_standalone_show(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR_RO(phy_standalone);
+/**
+ * phy_sfp_connect_phy - Connect the SFP module's PHY to the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It adds the
+ * SFP module's phy to the phy namespace of the upstream phy
+ */
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy)
+{
+ struct phy_device *phydev = upstream;
+ struct phy_link_topology *topo = phy_get_link_topology(phydev);
+
+ if (topo)
+ return phy_link_topo_add_phy(topo, phy, PHY_UPSTREAM_PHY, phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_sfp_connect_phy);
+
+/**
+ * phy_sfp_disconnect_phy - Disconnect the SFP module's PHY from the upstream PHY
+ * @upstream: pointer to the upstream phy device
+ * @phy: pointer to the SFP module's phy device
+ *
+ * This helper allows keeping track of PHY devices on the link. It removes the
+ * SFP module's phy to the phy namespace of the upstream phy. As the module phy
+ * will be destroyed, re-inserting the same module will add a new phy with a
+ * new index.
+ */
+void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy)
+{
+ struct phy_device *phydev = upstream;
+ struct phy_link_topology *topo = phy_get_link_topology(phydev);
+
+ if (topo)
+ phy_link_topo_del_phy(topo, phy);
+}
+EXPORT_SYMBOL(phy_sfp_disconnect_phy);
+
/**
* phy_sfp_attach - attach the SFP bus to the PHY upstream network device
* @upstream: pointer to the phy device
@@ -1725,6 +1725,8 @@ int phy_suspend(struct phy_device *phydev);
int phy_resume(struct phy_device *phydev);
int __phy_resume(struct phy_device *phydev);
int phy_loopback(struct phy_device *phydev, bool enable);
+int phy_sfp_connect_phy(void *upstream, struct phy_device *phy);
+void phy_sfp_disconnect_phy(void *upstream, struct phy_device *phy);
void phy_sfp_attach(void *upstream, struct sfp_bus *bus);
void phy_sfp_detach(void *upstream, struct sfp_bus *bus);
int phy_sfp_probe(struct phy_device *phydev,
There are a few PHY drivers that can handle SFP modules through their sfp_upstream_ops. Introduce Phylib helpers to keep track of connected SFP PHYs in a netdevice's namespace, by adding the SFP PHY to the upstream PHY's netdev's namespace. By doing so, these SFP PHYs can be enumerated and exposed to users, which will be able to use their capabilities. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- V6: Moved phy_get_link_topology() definition to this patch V5: No Changes V4: Rebased the at803x part with the newer version on net-next V3: Renaming V2: Renaming drivers/net/phy/at803x.c | 2 ++ drivers/net/phy/marvell-88x2222.c | 2 ++ drivers/net/phy/marvell.c | 2 ++ drivers/net/phy/marvell10g.c | 2 ++ drivers/net/phy/phy_device.c | 48 +++++++++++++++++++++++++++++++ include/linux/phy.h | 2 ++ 6 files changed, 58 insertions(+)