| Message ID | 20240201121106.1471301-3-andyshrk@163.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/4] arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B | expand |
On 2024-02-01 13:11, Andy Yan wrote: > According to the schematic, USB20 HOST0 and HOST1 each have their own > independent power supply, but these two regulators controlled by a > same GPIO, so give it a more appropriate name. > > Fixes: 791c154c3982 ("arm64: dts: rockchip: Add support for rk3588 > based board Cool Pi CM5 EVB") > Signed-off-by: Andy Yan <andyshrk@163.com> Looking good to me. Reviewed-by: Dragan Simic <dsimic@manjaro.org> > --- > > Changes in v2: > - Add two lable for this regulator > > arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts > b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts > index 1b5681fe0471..9c0f408ef339 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts > +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts > @@ -84,7 +84,7 @@ vcc3v3_lcd: vcc3v3-lcd-regulator { > vin-supply = <&vcc3v3_sys>; > }; > > - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { > + vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator { > compatible = "regulator-fixed"; > regulator-name = "vcc5v0_host"; > regulator-boot-on; > @@ -200,12 +200,12 @@ &u2phy3 { > }; > > &u2phy2_host { > - phy-supply = <&vcc5v0_usb30_host>; > + phy-supply = <&vcc5v0_usb_host1>; > status = "okay"; > }; > > &u2phy3_host { > - phy-supply = <&vcc5v0_usb30_host>; > + phy-supply = <&vcc5v0_usb_host2>; > status = "okay"; > };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts index 1b5681fe0471..9c0f408ef339 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts @@ -84,7 +84,7 @@ vcc3v3_lcd: vcc3v3-lcd-regulator { vin-supply = <&vcc3v3_sys>; }; - vcc5v0_usb30_host: vcc5v0-usb30-host-regulator { + vcc5v0_usb_host1: vcc5v0_usb_host2: vcc5v0-usb-host-regulator { compatible = "regulator-fixed"; regulator-name = "vcc5v0_host"; regulator-boot-on; @@ -200,12 +200,12 @@ &u2phy3 { }; &u2phy2_host { - phy-supply = <&vcc5v0_usb30_host>; + phy-supply = <&vcc5v0_usb_host1>; status = "okay"; }; &u2phy3_host { - phy-supply = <&vcc5v0_usb30_host>; + phy-supply = <&vcc5v0_usb_host2>; status = "okay"; };
According to the schematic, USB20 HOST0 and HOST1 each have their own independent power supply, but these two regulators controlled by a same GPIO, so give it a more appropriate name. Fixes: 791c154c3982 ("arm64: dts: rockchip: Add support for rk3588 based board Cool Pi CM5 EVB") Signed-off-by: Andy Yan <andyshrk@163.com> --- Changes in v2: - Add two lable for this regulator arch/arm64/boot/dts/rockchip/rk3588-coolpi-cm5-evb.dts | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)