@@ -339,6 +339,19 @@ config TI_K3_DSP_REMOTEPROC
It's safe to say N here if you're not interested in utilizing
the DSP slave processors.
+config TI_K3_M4_REMOTEPROC
+ tristate "TI K3 M4 remoteproc support"
+ depends on ARCH_K3 || COMPILE_TEST
+ select MAILBOX
+ select OMAP2PLUS_MBOX
+ help
+ Say m here to support TI's M4 remote processor subsystems
+ on various TI K3 family of SoCs through the remote processor
+ framework.
+
+ It's safe to say N here if you're not interested in utilizing
+ a remote processor.
+
config TI_K3_R5_REMOTEPROC
tristate "TI K3 R5 remoteproc support"
depends on ARCH_K3
@@ -37,5 +37,6 @@ obj-$(CONFIG_ST_REMOTEPROC) += st_remoteproc.o
obj-$(CONFIG_ST_SLIM_REMOTEPROC) += st_slim_rproc.o
obj-$(CONFIG_STM32_RPROC) += stm32_rproc.o
obj-$(CONFIG_TI_K3_DSP_REMOTEPROC) += ti_k3_dsp_remoteproc.o ti_k3_common.o
+obj-$(CONFIG_TI_K3_M4_REMOTEPROC) += ti_k3_m4_remoteproc.o ti_k3_common.o
obj-$(CONFIG_TI_K3_R5_REMOTEPROC) += ti_k3_r5_remoteproc.o
obj-$(CONFIG_XLNX_R5_REMOTEPROC) += xlnx_r5_remoteproc.o
new file mode 100644
@@ -0,0 +1,327 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI K3 Cortex-M4 Remote Processor(s) driver
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ * Hari Nagalla <hnagalla@ti.com>
+ */
+
+#include <linux/io.h>
+#include <linux/mailbox_client.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/omap-mailbox.h>
+#include <linux/platform_device.h>
+#include <linux/remoteproc.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include "omap_remoteproc.h"
+#include "remoteproc_internal.h"
+#include "ti_sci_proc.h"
+#include "ti_k3_common.h"
+
+/*
+ * Power up the M4F remote processor.
+ *
+ * This function will be invoked only after the firmware for this rproc
+ * was loaded, parsed successfully, and all of its resource requirements
+ * were met. This callback is invoked only in remoteproc mode.
+ */
+static int k3_m4_rproc_start(struct rproc *rproc)
+{
+ struct k3_rproc *kproc = rproc->priv;
+ u32 boot_addr;
+ int ret;
+
+ ret = k3_rproc_request_mbox(rproc);
+ if (ret)
+ return ret;
+
+ boot_addr = rproc->bootaddr;
+ ret = k3_rproc_release(kproc);
+ if (ret)
+ goto put_mbox;
+
+ return 0;
+
+put_mbox:
+ mbox_free_channel(kproc->mbox);
+ return ret;
+}
+
+/*
+ * Stop the M4 remote processor.
+ *
+ * This function puts the M4 processor into reset, and finishes processing
+ * of any pending messages. This callback is invoked only in remoteproc mode.
+ */
+static int k3_m4_rproc_stop(struct rproc *rproc)
+{
+ struct k3_rproc *kproc = rproc->priv;
+
+ mbox_free_channel(kproc->mbox);
+
+ k3_rproc_reset(kproc);
+
+ return 0;
+}
+
+/*
+ * Attach to a running M4 remote processor (IPC-only mode)
+ *
+ * This rproc attach callback only needs to request the mailbox, the remote
+ * processor is already booted, so there is no need to issue any TI-SCI
+ * commands to boot the M4 core. This callback is used only in IPC-only mode.
+ */
+static int k3_m4_rproc_attach(struct rproc *rproc)
+{
+ struct k3_rproc *kproc = rproc->priv;
+ struct device *dev = kproc->dev;
+ int ret;
+
+ ret = k3_rproc_request_mbox(rproc);
+ if (ret)
+ return ret;
+
+ dev_info(dev, "M4 initialized in IPC-only mode\n");
+ return 0;
+}
+
+/*
+ * Detach from a running M4 remote processor (IPC-only mode)
+ *
+ * This rproc detach callback performs the opposite operation to attach callback
+ * and only needs to release the mailbox, the M4 core is not stopped and will
+ * be left to continue to run its booted firmware. This callback is invoked only in
+ * IPC-only mode.
+ */
+static int k3_m4_rproc_detach(struct rproc *rproc)
+{
+ struct k3_rproc *kproc = rproc->priv;
+ struct device *dev = kproc->dev;
+
+ mbox_free_channel(kproc->mbox);
+ dev_info(dev, "M4 deinitialized in IPC-only mode\n");
+ return 0;
+}
+
+static const struct rproc_ops k3_m4_rproc_ops = {
+ .start = k3_m4_rproc_start,
+ .stop = k3_m4_rproc_stop,
+ .attach = k3_m4_rproc_attach,
+ .detach = k3_m4_rproc_detach,
+ .kick = k3_rproc_kick,
+ .da_to_va = k3_rproc_da_to_va,
+ .get_loaded_rsc_table = k3_get_loaded_rsc_table,
+};
+
+static int k3_m4_rproc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ const struct k3_rproc_dev_data *data;
+ struct k3_rproc *kproc;
+ struct rproc *rproc;
+ const char *fw_name;
+ bool r_state = false;
+ bool p_state = false;
+ int ret = 0;
+ int ret1;
+
+ data = of_device_get_match_data(dev);
+ if (!data)
+ return -ENODEV;
+
+ ret = rproc_of_parse_firmware(dev, 0, &fw_name);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to parse firmware-name property\n");
+ return ret;
+ }
+
+ rproc = rproc_alloc(dev, dev_name(dev), &k3_m4_rproc_ops, fw_name,
+ sizeof(*kproc));
+ if (!rproc)
+ return -ENOMEM;
+
+ rproc->has_iommu = false;
+ rproc->recovery_disabled = true;
+ if (data->uses_lreset) {
+ rproc->ops->prepare = k3_rproc_prepare;
+ rproc->ops->unprepare = k3_rproc_unprepare;
+ }
+ kproc = rproc->priv;
+ kproc->rproc = rproc;
+ kproc->dev = dev;
+ kproc->data = data;
+
+ kproc->ti_sci = ti_sci_get_by_phandle(np, "ti,sci");
+ if (IS_ERR(kproc->ti_sci)) {
+ ret = PTR_ERR(kproc->ti_sci);
+ dev_err_probe(dev, ret, "failed to get ti-sci handle\n");
+ kproc->ti_sci = NULL;
+ goto free_rproc;
+ }
+
+ ret = of_property_read_u32(np, "ti,sci-dev-id", &kproc->ti_sci_id);
+ if (ret) {
+ dev_err_probe(dev, ret, "missing 'ti,sci-dev-id' property\n");
+ goto put_sci;
+ }
+
+ kproc->reset = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(kproc->reset)) {
+ ret = PTR_ERR(kproc->reset);
+ dev_err_probe(dev, ret, "failed to get reset\n");
+ goto put_sci;
+ }
+
+ kproc->tsp = k3_rproc_of_get_tsp(dev, kproc->ti_sci);
+ if (IS_ERR(kproc->tsp)) {
+ dev_err_probe(dev, PTR_ERR(kproc->tsp), "failed to construct ti-sci proc control\n");
+ ret = PTR_ERR(kproc->tsp);
+ goto put_sci;
+ }
+
+ ret = ti_sci_proc_request(kproc->tsp);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "ti_sci_proc_request failed\n");
+ goto free_tsp;
+ }
+
+ ret = k3_rproc_of_get_memories(pdev, kproc);
+ if (ret)
+ goto release_tsp;
+
+ ret = k3_rproc_of_get_sram_memories(pdev, kproc);
+ if (ret)
+ goto release_tsp;
+
+ ret = k3_reserved_mem_init(kproc);
+ if (ret) {
+ dev_err_probe(dev, ret, "reserved memory init failed\n");
+ goto release_tsp;
+ }
+
+ ret = kproc->ti_sci->ops.dev_ops.is_on(kproc->ti_sci, kproc->ti_sci_id,
+ &r_state, &p_state);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to get initial state, mode cannot be determined\n");
+ goto release_mem;
+ }
+
+ /* configure devices for either remoteproc or IPC-only mode */
+ if (p_state) {
+ dev_info(dev, "configured M4 for IPC-only mode\n");
+ rproc->state = RPROC_DETACHED;
+ /* override rproc ops with only required IPC-only mode ops */
+ rproc->ops->prepare = NULL;
+ rproc->ops->unprepare = NULL;
+ rproc->ops->start = NULL;
+ rproc->ops->stop = NULL;
+ rproc->ops->attach = k3_m4_rproc_attach;
+ rproc->ops->detach = k3_m4_rproc_detach;
+ rproc->ops->get_loaded_rsc_table = k3_get_loaded_rsc_table;
+ } else {
+ dev_info(dev, "configured M4 for remoteproc mode\n");
+ /*
+ * ensure the M4 local reset is asserted to ensure the core
+ * doesn't execute bogus code in .prepare() when the module
+ * reset is released.
+ */
+ if (data->uses_lreset) {
+ ret = reset_control_status(kproc->reset);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "failed to get reset status\n");
+ goto release_mem;
+ } else if (ret == 0) {
+ dev_warn(dev, "local reset is deasserted for device\n");
+ k3_rproc_reset(kproc);
+ }
+ }
+ }
+
+ ret = rproc_add(rproc);
+ if (ret) {
+ dev_err_probe(dev, ret, "failed to add register device with remoteproc core\n");
+ goto release_mem;
+ }
+
+ platform_set_drvdata(pdev, kproc);
+
+ return 0;
+
+release_mem:
+ k3_reserved_mem_exit(kproc);
+release_tsp:
+ ret1 = ti_sci_proc_release(kproc->tsp);
+ if (ret1)
+ dev_err_probe(dev, ret1, "failed to release proc\n");
+free_tsp:
+ kfree(kproc->tsp);
+put_sci:
+ ret1 = ti_sci_put_handle(kproc->ti_sci);
+ if (ret1)
+ dev_err_probe(dev, ret1, "failed to put ti_sci handle\n");
+free_rproc:
+ rproc_free(rproc);
+ return ret;
+}
+
+static int k3_m4_rproc_remove(struct platform_device *pdev)
+{
+ struct k3_rproc *kproc = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ rproc_del(kproc->rproc);
+
+ ret = ti_sci_proc_release(kproc->tsp);
+ if (ret)
+ dev_err(dev, "failed to release proc, ret = %d\n", ret);
+
+ kfree(kproc->tsp);
+
+ ret = ti_sci_put_handle(kproc->ti_sci);
+ if (ret)
+ dev_err(dev, "failed to put ti_sci handle, ret = %d\n", ret);
+
+ k3_reserved_mem_exit(kproc);
+ rproc_free(kproc->rproc);
+
+ return 0;
+}
+
+static const struct k3_rproc_mem_data am64_m4_mems[] = {
+ { .name = "iram", .dev_addr = 0x0 },
+ { .name = "dram", .dev_addr = 0x30000 },
+};
+
+static const struct k3_rproc_dev_data am64_m4_data = {
+ .mems = am64_m4_mems,
+ .num_mems = ARRAY_SIZE(am64_m4_mems),
+ .boot_align_addr = SZ_1K,
+ .uses_lreset = true,
+};
+
+static const struct of_device_id k3_m4_of_match[] = {
+ { .compatible = "ti,am64-m4fss", .data = &am64_m4_data, },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, k3_m4_of_match);
+
+static struct platform_driver k3_m4_rproc_driver = {
+ .probe = k3_m4_rproc_probe,
+ .remove = k3_m4_rproc_remove,
+ .driver = {
+ .name = "k3-m4-rproc",
+ .of_match_table = k3_m4_of_match,
+ },
+};
+
+module_platform_driver(k3_m4_rproc_driver);
+
+MODULE_AUTHOR("Hari Nagalla <hnagalla@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TI K3 M4 Remoteproc driver");