[v2,3/3] arm64: dts: allwinner: Add Jide Remix Mini PC support

Message ID	20240209114018.3580370-4-andre.przywara@arm.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Andre Przywara <andre.przywara@arm.com> To: Jernej Skrabec <jernej.skrabec@gmail.com>, Chen-Yu Tsai <wens@csie.org>, Samuel Holland <samuel@sholland.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>, Conor Dooley <conor+dt@kernel.org> Cc: linux-sunxi@lists.linux.dev, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/3] arm64: dts: allwinner: Add Jide Remix Mini PC support Date: Fri, 9 Feb 2024 11:40:18 +0000 Message-Id: <20240209114018.3580370-4-andre.przywara@arm.com> In-Reply-To: <20240209114018.3580370-1-andre.przywara@arm.com> References: <20240209114018.3580370-1-andre.przywara@arm.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	arm64: dts: allwinner: Add Remix Mini PC support \| expand [v2,0/3] arm64: dts: allwinner: Add Remix Mini PC support [v2,1/3] dt-bindings: vendor-prefixes: add Jide [v2,2/3] dt-bindings: arm: sunxi: document Remix Mini PC name [v2,3/3] arm64: dts: allwinner: Add Jide Remix Mini PC support

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 91d505b385de5..2db3b15ad09f2 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -16,6 +16,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h64-remix-mini-pc.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts b/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts new file mode 100644 index 0000000000000..b6e3c169797f0 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h64-remix-mini-pc.dts @@ -0,0 +1,356 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +// Copyright (c) 2023 ARM Ltd. + +/dts-v1/; + +#include "sun50i-a64.dtsi" +#include "sun50i-a64-cpu-opp.dtsi" + +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Remix Mini PC"; + compatible = "jide,remix-mini-pc", "allwinner,sun50i-h64", + "allwinner,sun50i-a64"; + + aliases { + ethernet1 = &rtl8723bs; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc5v: regulator-5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + post-power-on-delay-ms = <200>; + }; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + cpvdd-supply = <&reg_eldo1>; + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu1 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu2 { + cpu-supply = <&reg_dcdc2>; +}; + +&cpu3 { + cpu-supply = <&reg_dcdc2>; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&hdmi { + hvcc-supply = <&reg_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +/* Connects to the AC200 chip */ +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&i2c0_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <&reg_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&reg_aldo1>; + vqmmc-supply = <&reg_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>, <&mmc2_ds_pin>; + vmmc-supply = <&reg_dcdc1>; + vqmmc-supply = <&reg_eldo1>; + bus-width = <8>; + non-removable; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&pio { + vcc-pb-supply = <&reg_dcdc1>; + vcc-pc-supply = <&reg_dcdc1>; + vcc-pd-supply = <&reg_dcdc1>; + vcc-pe-supply = <&reg_dcdc1>; + vcc-pf-supply = <&reg_dcdc1>; + vcc-pg-supply = <&reg_dldo4>; + vcc-ph-supply = <&reg_dcdc1>; +}; + +&r_ir { + status = "okay"; +}; + +&r_pio { + /* + * We cannot add that supply for now since it would create a circular + * dependency between pinctrl, the regulator and the RSB Bus. + * + * vcc-pl-supply = <&reg_aldo2>; + */ +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_LOW>; + x-powers,drive-vbus-en; + + vin1-supply = <&reg_vcc5v>; + vin2-supply = <&reg_vcc5v>; + vin3-supply = <&reg_vcc5v>; + vin5-supply = <&reg_vcc5v>; + vin6-supply = <&reg_vcc5v>; + aldoin-supply = <&reg_vcc5v>; + dldoin-supply = <&reg_vcc5v>; + eldoin-supply = <&reg_vcc5v>; + fldoin-supply = <&reg_vcc5v>; + drivevbus-supply = <&reg_vcc5v>; + ips-supply = <&reg_vcc5v>; + + status = "okay"; + }; +}; + +#include "axp803.dtsi" + +&ac_power_supply { + status = "okay"; +}; + +&reg_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +&reg_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +&reg_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-dram"; +}; + +/* Deviates from the reset default of 1.1V. */ +&reg_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-sys"; +}; + +&reg_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&reg_aldo2 { + /* Specifying R_PIO consumer would create circular dependency. */ + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +&reg_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +/* AC200 power supply */ +&reg_dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ave-33"; +}; + +&reg_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +&reg_drivevbus { + regulator-name = "usb0-vbus"; + status = "okay"; +}; + +&reg_eldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-cpvdd-dram-emmc"; +}; + +/* Supplies the arisc management core, needed by TF-A to power off cores. */ +&reg_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +&reg_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_hdmi { + vcc-hdmi-supply = <&reg_dcdc1>; +}; + +&sound { + simple-audio-card,aux-devs = <&codec_analog>; + simple-audio-card,widgets = "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Left DAC", "DACL", + "Right DAC", "DACR", + "Headphone Jack", "HP", + "ADCL", "Left ADC", + "ADCR", "Right ADC", + "MIC2", "Microphone Jack"; + status = "okay"; +}; + +/* On the (unpopulated) UART pads. */ +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + max-speed = <1500000>; + }; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + usb0_vbus-supply = <&reg_drivevbus>; + usb1_vbus-supply = <&reg_drivevbus>; + status = "okay"; +};

[v2,3/3] arm64: dts: allwinner: Add Jide Remix Mini PC support

Commit Message

Comments

Patch