diff mbox series

[2/3] dt-bindings: auxdisplay: adjust example indentation and use generic node names

Message ID 20240212083426.26757-2-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Headers show
Series [1/3] dt-bindings: auxdisplay: hit,hd44780: drop redundant GPIO node | expand

Commit Message

Krzysztof Kozlowski Feb. 12, 2024, 8:34 a.m. UTC 
The example DTS should be indented with two or four (preferred) spaces,
as mentioned in Writing Schema document.  While re-indenting, change the
node names to somehow generic names, as expected by Devicetree
specification.

Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../auxdisplay/arm,versatile-lcd.yaml         |  4 +-
 .../bindings/auxdisplay/hit,hd44780.yaml      | 44 ++++++++--------
 .../bindings/auxdisplay/holtek,ht16k33.yaml   | 50 +++++++++----------
 .../bindings/auxdisplay/img,ascii-lcd.yaml    |  4 +-
 4 files changed, 51 insertions(+), 51 deletions(-)

Comments

Andy Shevchenko Feb. 12, 2024, 12:14 p.m. UTC | #1 
On Mon, Feb 12, 2024 at 09:34:25AM +0100, Krzysztof Kozlowski wrote:
> The example DTS should be indented with two or four (preferred) spaces,
> as mentioned in Writing Schema document.  While re-indenting, change the
> node names to somehow generic names, as expected by Devicetree
> specification.

Thank you, it's helpful!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
index 5d02bd032a85..439f7b811a94 100644
--- a/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/arm,versatile-lcd.yaml
@@ -39,6 +39,6 @@  additionalProperties: false
 examples:
   - |
     lcd@10008000 {
-            compatible = "arm,versatile-lcd";
-            reg = <0x10008000 0x1000>;
+        compatible = "arm,versatile-lcd";
+        reg = <0x10008000 0x1000>;
     };
diff --git a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
index 73d07f2cb303..1c7fd29bbcc7 100644
--- a/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/hit,hd44780.yaml
@@ -84,32 +84,32 @@  additionalProperties: false
 examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
-    auxdisplay {
-            compatible = "hit,hd44780";
+    display-controller {
+        compatible = "hit,hd44780";
 
-            data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
-                         <&hc595 1 GPIO_ACTIVE_HIGH>,
-                         <&hc595 2 GPIO_ACTIVE_HIGH>,
-                         <&hc595 3 GPIO_ACTIVE_HIGH>;
-            enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
-            rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
+        data-gpios = <&hc595 0 GPIO_ACTIVE_HIGH>,
+                     <&hc595 1 GPIO_ACTIVE_HIGH>,
+                     <&hc595 2 GPIO_ACTIVE_HIGH>,
+                     <&hc595 3 GPIO_ACTIVE_HIGH>;
+        enable-gpios = <&hc595 4 GPIO_ACTIVE_HIGH>;
+        rs-gpios = <&hc595 5 GPIO_ACTIVE_HIGH>;
 
-            display-height-chars = <2>;
-            display-width-chars = <16>;
+        display-height-chars = <2>;
+        display-width-chars = <16>;
     };
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-    hd44780 {
-            compatible = "hit,hd44780";
-            display-height-chars = <2>;
-            display-width-chars = <16>;
-            data-gpios = <&pcf8574 4 0>,
-                         <&pcf8574 5 0>,
-                         <&pcf8574 6 0>,
-                         <&pcf8574 7 0>;
-            enable-gpios = <&pcf8574 2 0>;
-            rs-gpios = <&pcf8574 0 0>;
-            rw-gpios = <&pcf8574 1 0>;
-            backlight-gpios = <&pcf8574 3 0>;
+    display-controller {
+        compatible = "hit,hd44780";
+        display-height-chars = <2>;
+        display-width-chars = <16>;
+        data-gpios = <&pcf8574 4 0>,
+                     <&pcf8574 5 0>,
+                     <&pcf8574 6 0>,
+                     <&pcf8574 7 0>;
+        enable-gpios = <&pcf8574 2 0>;
+        rs-gpios = <&pcf8574 0 0>;
+        rw-gpios = <&pcf8574 1 0>;
+        backlight-gpios = <&pcf8574 3 0>;
     };
diff --git a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
index be95f6b97b41..b90eec2077b4 100644
--- a/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/holtek,ht16k33.yaml
@@ -74,31 +74,31 @@  examples:
     #include <dt-bindings/input/input.h>
     #include <dt-bindings/leds/common.h>
     i2c {
-            #address-cells = <1>;
-            #size-cells = <0>;
+        #address-cells = <1>;
+        #size-cells = <0>;
 
-            ht16k33: ht16k33@70 {
-                    compatible = "holtek,ht16k33";
-                    reg = <0x70>;
-                    refresh-rate-hz = <20>;
-                    interrupt-parent = <&gpio4>;
-                    interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
-                    debounce-delay-ms = <50>;
-                    linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
-                                   <MATRIX_KEY(3, 0, KEY_F8)>,
-                                   <MATRIX_KEY(4, 0, KEY_F10)>,
-                                   <MATRIX_KEY(5, 0, KEY_F4)>,
-                                   <MATRIX_KEY(6, 0, KEY_F2)>,
-                                   <MATRIX_KEY(2, 1, KEY_F5)>,
-                                   <MATRIX_KEY(3, 1, KEY_F7)>,
-                                   <MATRIX_KEY(4, 1, KEY_F9)>,
-                                   <MATRIX_KEY(5, 1, KEY_F3)>,
-                                   <MATRIX_KEY(6, 1, KEY_F1)>;
+        display-controller@70 {
+            compatible = "holtek,ht16k33";
+            reg = <0x70>;
+            refresh-rate-hz = <20>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+            debounce-delay-ms = <50>;
+            linux,keymap = <MATRIX_KEY(2, 0, KEY_F6)>,
+                           <MATRIX_KEY(3, 0, KEY_F8)>,
+                           <MATRIX_KEY(4, 0, KEY_F10)>,
+                           <MATRIX_KEY(5, 0, KEY_F4)>,
+                           <MATRIX_KEY(6, 0, KEY_F2)>,
+                           <MATRIX_KEY(2, 1, KEY_F5)>,
+                           <MATRIX_KEY(3, 1, KEY_F7)>,
+                           <MATRIX_KEY(4, 1, KEY_F9)>,
+                           <MATRIX_KEY(5, 1, KEY_F3)>,
+                           <MATRIX_KEY(6, 1, KEY_F1)>;
 
-                    led {
-                            color = <LED_COLOR_ID_RED>;
-                            function = LED_FUNCTION_BACKLIGHT;
-                            linux,default-trigger = "backlight";
-                    };
+            led {
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_BACKLIGHT;
+                linux,default-trigger = "backlight";
             };
-      };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
index 1899b23de7d1..55e9831b3f67 100644
--- a/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
+++ b/Documentation/devicetree/bindings/auxdisplay/img,ascii-lcd.yaml
@@ -50,6 +50,6 @@  additionalProperties: false
 examples:
   - |
     lcd: lcd@17fff000 {
-            compatible = "img,boston-lcd";
-            reg = <0x17fff000 0x8>;
+        compatible = "img,boston-lcd";
+        reg = <0x17fff000 0x8>;
     };