diff mbox series

[v4,19/20] arch: arm64: dts: meson: g12: add crypto node

Message ID 20240212135108.549755-20-avromanov@salutedevices.com (mailing list archive)
State New, archived
Headers show
Series Support more Amlogic SoC families in crypto driver | expand

Commit Message

Alexey Romanov Feb. 12, 2024, 1:51 p.m. UTC 
This patch adds a crypto node declaration for Amlogic G12-series.
With the Amlogic crypto driver we can use HW implementation
of SHA1/224/256 and AES algo.

Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
---
 arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Neil Armstrong Feb. 12, 2024, 5:04 p.m. UTC | #1 
On 12/02/2024 14:51, Alexey Romanov wrote:
> This patch adds a crypto node declaration for Amlogic G12-series.
> With the Amlogic crypto driver we can use HW implementation
> of SHA1/224/256 and AES algo.
> 
> Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
> ---
>   arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++
>   1 file changed, 6 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> index ff68b911b729..f6d7047a579c 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
> @@ -1709,6 +1709,12 @@ internal_ephy: ethernet-phy@8 {
>   					};
>   				};
>   			};
> +
> +			crypto: crypto@3e000 {
> +				compatible = "amlogic,g12a-crypto";
> +				reg = <0x0 0x3e000 0x0 0x48>;
> +				interrupts = <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>;
> +			};
>   		};
>   
>   		aobus: bus@ff800000 {

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
index ff68b911b729..f6d7047a579c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi
@@ -1709,6 +1709,12 @@  internal_ephy: ethernet-phy@8 {
 					};
 				};
 			};
+
+			crypto: crypto@3e000 {
+				compatible = "amlogic,g12a-crypto";
+				reg = <0x0 0x3e000 0x0 0x48>;
+				interrupts = <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>;
+			};
 		};
 
 		aobus: bus@ff800000 {