@@ -579,6 +579,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -590,7 +591,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x1>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- ti,clkbuf-sel = <0x7>;
bus-width = <4>;
status = "disabled";
};
@@ -602,6 +602,7 @@ sdhci2: mmc@fa20000 {
power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x8>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0x0>;
@@ -613,7 +614,6 @@ sdhci2: mmc@fa20000 {
ti,itap-del-sel-sd-hs = <0xa>;
ti,itap-del-sel-sdr12 = <0xa>;
ti,itap-del-sel-sdr25 = <0x1>;
- ti,clkbuf-sel = <0x7>;
status = "disabled";
};
@@ -561,6 +561,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -572,7 +573,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- ti,clkbuf-sel = <0x7>;
bus-width = <4>;
no-1-8-v;
status = "disabled";
@@ -628,6 +628,7 @@ sdhci0: mmc@fa10000 {
clock-names = "clk_ahb", "clk_xin";
mmc-ddr-1_8v;
mmc-hs200-1_8v;
+ ti,clkbuf-sel = <0x7>;
ti,trm-icp = <0x2>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-mmc-hs = <0x0>;
@@ -646,6 +647,7 @@ sdhci1: mmc@fa00000 {
power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 58 3>, <&k3_clks 58 4>;
clock-names = "clk_ahb", "clk_xin";
+ ti,clkbuf-sel = <0x7>;
ti,otap-del-sel-legacy = <0x0>;
ti,otap-del-sel-sd-hs = <0x0>;
ti,otap-del-sel-sdr12 = <0xf>;
@@ -657,7 +659,6 @@ sdhci1: mmc@fa00000 {
ti,itap-del-sel-sd-hs = <0x0>;
ti,itap-del-sel-sdr12 = <0x0>;
ti,itap-del-sel-sdr25 = <0x0>;
- ti,clkbuf-sel = <0x7>;
status = "disabled";
};
Move ti,clkbuf-sel property above the OTAP/ITAP delay values. While there is no error with where it is currently at, it is easier to read the MMC node if ti,clkbuf-sel is located above the OTAP/ITAP delay values consistently across MMC nodes. Add missing ti,clkbuf-sel for MMC0 in k3-am64-main. Signed-off-by: Judith Mendez <jm@ti.com> --- arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 4 ++-- arch/arm64/boot/dts/ti/k3-am62a-main.dtsi | 2 +- arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 3 ++- 3 files changed, 5 insertions(+), 4 deletions(-)