diff mbox series

[v5,06/20] EDAC/synopsys: Fix misleading IRQ self-cleared quirk flag

Message ID 20240222181324.28242-7-fancer.lancer@gmail.com (mailing list archive)
State New, archived
Headers show
Series EDAC/mc/synopsys: Various fixes and cleanups | expand

Commit Message

Serge Semin Feb. 22, 2024, 6:12 p.m. UTC
The DDR_ECC_INTR_SELF_CLEAR quirk flag was initially added in the commit
f7824ded4149 ("EDAC/synopsys: Add support for version 3 of the Synopsys
EDAC DDR") in order to distinguish the ZynqMP DDRC (based on DW uMCTL2
DDRC v2.40a) and the announced in that commit Synopsys DDR controller
v3.80a. The selected name is misleading for the next reasons:

1. None of the Synopsys DW uMCTL2 DDR IP-core has the UE/CE IRQs
auto or self cleared. The IRQ signals (ecc_corrected_err_intr and
ecc_uncorrected_err_intr) are cleared together with the rest of the ECC
error data by means of writing 1's to the respective ECCCLR bits. It
worked like that in DW uMCTL2 DDRC v2.x IP-core and it's still true for
the modern DW uMCTL2 DDRC v3.x.

2. The IRQ-related registers accessed unless the denoted quirk is
specified are actually Xilinx Zynq-specific. None of the Synopsys DW uMCTL
DDRC IP-core have any registers at the offsets 0x20200/0x20208/0x2020C.
The most modern DW uMCTL2 DDRC v3.91a IP-core available has CSRs space end
at the 0x43dc offset. The older IP-cores have even smaller registers
space.

3. What was actually introduced in the DW uMCTL2 DDRC v3.10 by Synopsys is
the IRQ enable flags which older DW uMCTL2 DDRC IP-core didn't have. They
were added to the ECCCLR register (the CSR was also renamed to ECCCTL in
the v3.10 IP-core HW databook). So since then there have been no point in
having a vendor-specific IRQs masking solution like described in 2. and
the IRQ signal can be now shared even for the native DW uMCTL2 DDR
controllers.

So let's harmonize the quirked IRQs code based on the statements above:
rename the DDR_ECC_INTR_SELF_CLEAR quirk flag to SYNPS_ZYNQMP_IRQ_REGS
thus indicating the ZynqMP-specific IRQ CSRs; add the new quirk flag to
the ZynqMP platform data; drop the misleading comments about the
auto-cleared ue/ce flags; add a comment about the new IRQ enable flags
added in v3.10 IP-core.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>

---

Changelog v4:
- This is a new patch detached from
  [PATCH v3 01/17] EDAC/synopsys: Fix native uMCTL2 IRQs handling procedure
---
 drivers/edac/synopsys_edac.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index fbaf3d9ad517..9f79f14e57b2 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -88,7 +88,7 @@ 
 /* DDR ECC Quirks */
 #define DDR_ECC_INTR_SUPPORT		BIT(0)
 #define DDR_ECC_DATA_POISON_SUPPORT	BIT(1)
-#define DDR_ECC_INTR_SELF_CLEAR		BIT(2)
+#define SYNPS_ZYNQMP_IRQ_REGS		BIT(2)
 
 /* ZynqMP Enhanced DDR memory controller registers that are relevant to ECC */
 /* ECC Configuration Registers */
@@ -526,7 +526,7 @@  static void enable_intr(struct synps_edac_priv *priv)
 	unsigned long flags;
 
 	/* Enable UE/CE Interrupts */
-	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
+	if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS) {
 		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
 		       priv->baseaddr + DDR_QOS_IRQ_EN_OFST);
 
@@ -535,6 +535,10 @@  static void enable_intr(struct synps_edac_priv *priv)
 
 	spin_lock_irqsave(&priv->reglock, flags);
 
+	/*
+	 * IRQs Enable/Disable flags have been available since v3.10a.
+	 * This is noop for the older controllers.
+	 */
 	writel(DDR_UE_MASK | DDR_CE_MASK,
 	       priv->baseaddr + ECC_CLR_OFST);
 
@@ -546,7 +550,7 @@  static void disable_intr(struct synps_edac_priv *priv)
 	unsigned long flags;
 
 	/* Disable UE/CE Interrupts */
-	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
+	if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS) {
 		writel(DDR_QOSUE_MASK | DDR_QOSCE_MASK,
 		       priv->baseaddr + DDR_QOS_IRQ_DB_OFST);
 
@@ -577,11 +581,7 @@  static irqreturn_t intr_handler(int irq, void *dev_id)
 	priv = mci->pvt_info;
 	p_data = priv->p_data;
 
-	/*
-	 * v3.0 of the controller has the ce/ue bits cleared automatically,
-	 * so this condition does not apply.
-	 */
-	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR)) {
+	if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS) {
 		regval = readl(priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
 		regval &= (DDR_QOSCE_MASK | DDR_QOSUE_MASK);
 		if (!(regval & ECC_CE_UE_INTR_MASK))
@@ -598,8 +598,8 @@  static irqreturn_t intr_handler(int irq, void *dev_id)
 
 	edac_dbg(3, "Total error count CE %d UE %d\n",
 		 priv->ce_cnt, priv->ue_cnt);
-	/* v3.0 of the controller does not have this register */
-	if (!(priv->p_data->quirks & DDR_ECC_INTR_SELF_CLEAR))
+
+	if (priv->p_data->quirks & SYNPS_ZYNQMP_IRQ_REGS)
 		writel(regval, priv->baseaddr + DDR_QOS_IRQ_STAT_OFST);
 
 	return IRQ_HANDLED;
@@ -913,7 +913,7 @@  static const struct synps_platform_data zynqmp_edac_def = {
 	.get_mtype	= zynqmp_get_mtype,
 	.get_dtype	= zynqmp_get_dtype,
 	.get_ecc_state	= zynqmp_get_ecc_state,
-	.quirks         = (DDR_ECC_INTR_SUPPORT
+	.quirks         = (DDR_ECC_INTR_SUPPORT | SYNPS_ZYNQMP_IRQ_REGS
 #ifdef CONFIG_EDAC_DEBUG
 			  | DDR_ECC_DATA_POISON_SUPPORT
 #endif
@@ -925,7 +925,7 @@  static const struct synps_platform_data synopsys_edac_def = {
 	.get_mtype	= zynqmp_get_mtype,
 	.get_dtype	= zynqmp_get_dtype,
 	.get_ecc_state	= zynqmp_get_ecc_state,
-	.quirks         = (DDR_ECC_INTR_SUPPORT | DDR_ECC_INTR_SELF_CLEAR
+	.quirks         = (DDR_ECC_INTR_SUPPORT
 #ifdef CONFIG_EDAC_DEBUG
 			  | DDR_ECC_DATA_POISON_SUPPORT
 #endif