diff mbox series

[v8,03/10] PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#

Message ID 20240224-pci-dbi-rework-v8-3-64c7fd0cfe64@linaro.org (mailing list archive)
State New, archived
Headers show
Series PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host | expand

Commit Message

Manivannan Sadhasivam Feb. 24, 2024, 6:54 a.m. UTC
For DWC glue drivers supporting PERST# (currently Qcom and Tegra194), some
of the DWC resources like eDMA should be cleaned up during the PERST#
assert time.

So let's introduce a dw_pcie_ep_cleanup() API that could be called by these
drivers to cleanup the DWC specific resources. Currently, it just removes
eDMA.

Reported-by: Niklas Cassel <cassel@kernel.org>
Closes: https://lore.kernel.org/linux-pci/ZWYmX8Y%2F7Q9WMxES@x1-carbon
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 11 +++++++++--
 drivers/pci/controller/dwc/pcie-designware.h    |  5 +++++
 drivers/pci/controller/dwc/pcie-qcom-ep.c       |  1 +
 drivers/pci/controller/dwc/pcie-tegra194.c      |  2 ++
 4 files changed, 17 insertions(+), 2 deletions(-)

Comments

Frank Li Feb. 26, 2024, 4:53 p.m. UTC | #1
On Sat, Feb 24, 2024 at 12:24:09PM +0530, Manivannan Sadhasivam wrote:
> For DWC glue drivers supporting PERST# (currently Qcom and Tegra194), some
> of the DWC resources like eDMA should be cleaned up during the PERST#
> assert time.
> 
> So let's introduce a dw_pcie_ep_cleanup() API that could be called by these
> drivers to cleanup the DWC specific resources. Currently, it just removes
> eDMA.
> 
> Reported-by: Niklas Cassel <cassel@kernel.org>
> Closes: https://lore.kernel.org/linux-pci/ZWYmX8Y%2F7Q9WMxES@x1-carbon
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/pci/controller/dwc/pcie-designware-ep.c | 11 +++++++++--
>  drivers/pci/controller/dwc/pcie-designware.h    |  5 +++++
>  drivers/pci/controller/dwc/pcie-qcom-ep.c       |  1 +
>  drivers/pci/controller/dwc/pcie-tegra194.c      |  2 ++
>  4 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index 2b11290aab4c..1205bfba8310 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -564,12 +564,19 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
>  	return 0;
>  }
>  
> -void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
> +void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> -	struct pci_epc *epc = ep->epc;
>  
>  	dw_pcie_edma_remove(pci);
> +}
> +EXPORT_SYMBOL_GPL(dw_pcie_ep_cleanup);
> +
> +void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
> +{
> +	struct pci_epc *epc = ep->epc;
> +
> +	dw_pcie_ep_cleanup(ep);
>  
>  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
>  			      epc->mem->window.page_size);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 61465203bb60..351d2fe3ea4d 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -672,6 +672,7 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep);
>  int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep);
>  void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep);
>  void dw_pcie_ep_deinit(struct dw_pcie_ep *ep);
> +void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep);
>  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no);
>  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
>  			     u8 interrupt_num);
> @@ -705,6 +706,10 @@ static inline void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
>  {
>  }
>  
> +static inline void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
> +{
> +}
> +
>  static inline int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
>  {
>  	return 0;
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index 36e5e80cd22f..59b1c0110288 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -507,6 +507,7 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci)
>  		return;
>  	}
>  
> +	dw_pcie_ep_cleanup(&pci->ep);
>  	qcom_pcie_disable_resources(pcie_ep);
>  	pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED;
>  }
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 7afa9e9aabe2..68bfeed3429b 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -1715,6 +1715,8 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
>  	if (ret)
>  		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
>  
> +	dw_pcie_ep_cleanup(&pcie->pci.ep);
> +
>  	reset_control_assert(pcie->core_rst);
>  
>  	tegra_pcie_disable_phy(pcie);
> 
> -- 
> 2.25.1
>
Niklas Cassel Feb. 29, 2024, 12:40 p.m. UTC | #2
On Sat, Feb 24, 2024 at 12:24:09PM +0530, Manivannan Sadhasivam wrote:
> For DWC glue drivers supporting PERST# (currently Qcom and Tegra194), some
> of the DWC resources like eDMA should be cleaned up during the PERST#
> assert time.
> 
> So let's introduce a dw_pcie_ep_cleanup() API that could be called by these
> drivers to cleanup the DWC specific resources. Currently, it just removes
> eDMA.
> 
> Reported-by: Niklas Cassel <cassel@kernel.org>
> Closes: https://lore.kernel.org/linux-pci/ZWYmX8Y%2F7Q9WMxES@x1-carbon
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  drivers/pci/controller/dwc/pcie-designware-ep.c | 11 +++++++++--
>  drivers/pci/controller/dwc/pcie-designware.h    |  5 +++++
>  drivers/pci/controller/dwc/pcie-qcom-ep.c       |  1 +
>  drivers/pci/controller/dwc/pcie-tegra194.c      |  2 ++
>  4 files changed, 17 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index 2b11290aab4c..1205bfba8310 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -564,12 +564,19 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
>  	return 0;
>  }
>  
> -void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
> +void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
>  {
>  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> -	struct pci_epc *epc = ep->epc;
>  
>  	dw_pcie_edma_remove(pci);

Hello Mani,

In this message:
https://lore.kernel.org/linux-pci/20240130062938.GB32821@thinkpad/

You mentioned that you were going to clean up the BARs.
(Like I wrote in that thread, I really think that we should merge a fix for
the broken "do we have a saved value from find_first_zero_bit() in the array",
by using a "if (!saved_value[bar])", when find_first_zero_bit() returns zero.)

However, regardless of that, I do not see that this series (neither
dw_pcie_ep_cleanup(), nor dw_pcie_ep_linkdown()), calls any function which
will clean up the BARs.

Since e.g. qcom-ep.c does a reset_control_assert() during perst
assert/deassert, which should clear sticky registers, I think that
you should let dw_pcie_ep_cleanup() clean up the BARs using
dw_pcie_ep_clear_bar().


Kind regards,
Niklas


> +}
> +EXPORT_SYMBOL_GPL(dw_pcie_ep_cleanup);
> +
> +void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
> +{
> +	struct pci_epc *epc = ep->epc;
> +
> +	dw_pcie_ep_cleanup(ep);
>  
>  	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
>  			      epc->mem->window.page_size);
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index 61465203bb60..351d2fe3ea4d 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -672,6 +672,7 @@ int dw_pcie_ep_init(struct dw_pcie_ep *ep);
>  int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep);
>  void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep);
>  void dw_pcie_ep_deinit(struct dw_pcie_ep *ep);
> +void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep);
>  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no);
>  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
>  			     u8 interrupt_num);
> @@ -705,6 +706,10 @@ static inline void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
>  {
>  }
>  
> +static inline void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
> +{
> +}
> +
>  static inline int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
>  {
>  	return 0;
> diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> index 36e5e80cd22f..59b1c0110288 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
> @@ -507,6 +507,7 @@ static void qcom_pcie_perst_assert(struct dw_pcie *pci)
>  		return;
>  	}
>  
> +	dw_pcie_ep_cleanup(&pci->ep);
>  	qcom_pcie_disable_resources(pcie_ep);
>  	pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED;
>  }
> diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
> index 7afa9e9aabe2..68bfeed3429b 100644
> --- a/drivers/pci/controller/dwc/pcie-tegra194.c
> +++ b/drivers/pci/controller/dwc/pcie-tegra194.c
> @@ -1715,6 +1715,8 @@ static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
>  	if (ret)
>  		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
>  
> +	dw_pcie_ep_cleanup(&pcie->pci.ep);
> +
>  	reset_control_assert(pcie->core_rst);
>  
>  	tegra_pcie_disable_phy(pcie);
> 
> -- 
> 2.25.1
>
Manivannan Sadhasivam March 4, 2024, 8:17 a.m. UTC | #3
On Thu, Feb 29, 2024 at 01:40:29PM +0100, Niklas Cassel wrote:
> On Sat, Feb 24, 2024 at 12:24:09PM +0530, Manivannan Sadhasivam wrote:
> > For DWC glue drivers supporting PERST# (currently Qcom and Tegra194), some
> > of the DWC resources like eDMA should be cleaned up during the PERST#
> > assert time.
> > 
> > So let's introduce a dw_pcie_ep_cleanup() API that could be called by these
> > drivers to cleanup the DWC specific resources. Currently, it just removes
> > eDMA.
> > 
> > Reported-by: Niklas Cassel <cassel@kernel.org>
> > Closes: https://lore.kernel.org/linux-pci/ZWYmX8Y%2F7Q9WMxES@x1-carbon
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  drivers/pci/controller/dwc/pcie-designware-ep.c | 11 +++++++++--
> >  drivers/pci/controller/dwc/pcie-designware.h    |  5 +++++
> >  drivers/pci/controller/dwc/pcie-qcom-ep.c       |  1 +
> >  drivers/pci/controller/dwc/pcie-tegra194.c      |  2 ++
> >  4 files changed, 17 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > index 2b11290aab4c..1205bfba8310 100644
> > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > @@ -564,12 +564,19 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
> >  	return 0;
> >  }
> >  
> > -void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
> > +void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
> >  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > -	struct pci_epc *epc = ep->epc;
> >  
> >  	dw_pcie_edma_remove(pci);
> 
> Hello Mani,
> 
> In this message:
> https://lore.kernel.org/linux-pci/20240130062938.GB32821@thinkpad/
> 
> You mentioned that you were going to clean up the BARs.

Yes, I did and it is still in my queue.

> (Like I wrote in that thread, I really think that we should merge a fix for
> the broken "do we have a saved value from find_first_zero_bit() in the array",
> by using a "if (!saved_value[bar])", when find_first_zero_bit() returns zero.)
> 

Hmm, yeah that logic is flawed. Let me take another look.

> However, regardless of that, I do not see that this series (neither
> dw_pcie_ep_cleanup(), nor dw_pcie_ep_linkdown()), calls any function which
> will clean up the BARs.
> 
> Since e.g. qcom-ep.c does a reset_control_assert() during perst
> assert/deassert, which should clear sticky registers, I think that
> you should let dw_pcie_ep_cleanup() clean up the BARs using
> dw_pcie_ep_clear_bar().
> 

As I mentioned earlier, it is the job of the EPF drivers to clear the BARs since
they allocate them. I'm trying to reduce the implicit resetting wherever we
could.

The proper fix is to add the LINK_DOWN callback to EPF drivers and do cleanup.
I'm planning to submit a series for that after this one.

- Mani
Niklas Cassel March 4, 2024, 10:51 a.m. UTC | #4
On Mon, Mar 04, 2024 at 01:47:13PM +0530, Manivannan Sadhasivam wrote:
> On Thu, Feb 29, 2024 at 01:40:29PM +0100, Niklas Cassel wrote:
> > On Sat, Feb 24, 2024 at 12:24:09PM +0530, Manivannan Sadhasivam wrote:
> > 
> > Since e.g. qcom-ep.c does a reset_control_assert() during perst
> > assert/deassert, which should clear sticky registers, I think that
> > you should let dw_pcie_ep_cleanup() clean up the BARs using
> > dw_pcie_ep_clear_bar().
> > 
> 
> As I mentioned earlier, it is the job of the EPF drivers to clear the BARs since
> they allocate them. I'm trying to reduce the implicit resetting wherever we
> could.
> 
> The proper fix is to add the LINK_DOWN callback to EPF drivers and do cleanup.
> I'm planning to submit a series for that after this one.

Currently, pci-epf-test allocates memory for the BARs in .bind().
Likewise it frees the memory for the BARs in .unbind().

AFAICT, most iATU registers, and most BAR registers are sticky registers,
so they will not get reset on link down.
(The currently selected BAR size, in case of Resizable BAR is an exception.)

That means that even on link down, we do not need to free the memory,
or change the iATU settings. (This applies to all drivers.)



However, on PERST (for the drivers call dw_pcie_ep_cleanup()), they call
reset_control_assert(), so they will clear sticky registers, which means
that they need to at least re-write the iATU and BAR registers.
(I guess they could free + allocate the memory for the BARs again,
but I don't think that is strictly necessary.)
That is why I suggested that you call dw_pcie_ep_clear_bar() from
dw_pcie_ep_cleanup().



If you free the memory for the BARs in link_down() (this callback exists
for many drivers, even drivers without a PERST handler), where are you
supposted to alloc the memory for the BARs again?

Allocating them at link_up() is too late (because as soon as the link is
up, the host is allowed to enumerate the EP BARs.) The proper place is to
allocate them when receiving PERST, but not all drivers have a PERST handler.

(My understanding is that 1) PERST assert 2) PERST deassert 3) link is up.)



unbind() undos what was done in bind(), so shouldn't link_down() undo what was
done in link_up()? With that logic, if you move the alloc to .core_init(),
should we perhaps have a .core_deinit() callback for EPF drivers?
(I guess only drivers which perform a reset during PERST would call this.)

But considering that free+alloc is not strictly needed, why not just keep
the allocation + free in .bind()/.unbind() ?
(To avoid the need to create a .core_deinit()), and let dw_pcie_ep_cleanup()
call dw_pcie_ep_clear_bar() ?

I guess my point is that it seems a bit pointless for drivers that do not
clear sticky registers to free+alloc memory on link down, for no good
reason. (Memory might get fragmented over time, so it might not be possible
to perform a big allocation after the device has been running for a really
long time.)



So I'm thinking that we either
1) Keep the alloc/free in bind/unbind, and let dw_pcie_ep_cleanup() call
dw_pcie_ep_clear_bar(),
or
2) Introduce a .deinit_core() callback which will free the BARs.
(Because I don't see how you will (re-)allocate memory for all drivers
if you free the memory in link_down().)


Kind regards,
Niklas
Manivannan Sadhasivam March 4, 2024, 3:04 p.m. UTC | #5
On Mon, Mar 04, 2024 at 11:51:04AM +0100, Niklas Cassel wrote:
> On Mon, Mar 04, 2024 at 01:47:13PM +0530, Manivannan Sadhasivam wrote:
> > On Thu, Feb 29, 2024 at 01:40:29PM +0100, Niklas Cassel wrote:
> > > On Sat, Feb 24, 2024 at 12:24:09PM +0530, Manivannan Sadhasivam wrote:
> > > 
> > > Since e.g. qcom-ep.c does a reset_control_assert() during perst
> > > assert/deassert, which should clear sticky registers, I think that
> > > you should let dw_pcie_ep_cleanup() clean up the BARs using
> > > dw_pcie_ep_clear_bar().
> > > 
> > 
> > As I mentioned earlier, it is the job of the EPF drivers to clear the BARs since
> > they allocate them. I'm trying to reduce the implicit resetting wherever we
> > could.
> > 
> > The proper fix is to add the LINK_DOWN callback to EPF drivers and do cleanup.
> > I'm planning to submit a series for that after this one.
> 
> Currently, pci-epf-test allocates memory for the BARs in .bind().
> Likewise it frees the memory for the BARs in .unbind().
> 
> AFAICT, most iATU registers, and most BAR registers are sticky registers,
> so they will not get reset on link down.
> (The currently selected BAR size, in case of Resizable BAR is an exception.)
> 
> That means that even on link down, we do not need to free the memory,
> or change the iATU settings. (This applies to all drivers.)
> 
> 
> 
> However, on PERST (for the drivers call dw_pcie_ep_cleanup()), they call
> reset_control_assert(), so they will clear sticky registers, which means
> that they need to at least re-write the iATU and BAR registers.
> (I guess they could free + allocate the memory for the BARs again,
> but I don't think that is strictly necessary.)
> That is why I suggested that you call dw_pcie_ep_clear_bar() from
> dw_pcie_ep_cleanup().
> 

Sorry, I keep assuming the flow w.r.t PERST# supported platforms :/

My bad!

> 
> 
> If you free the memory for the BARs in link_down() (this callback exists
> for many drivers, even drivers without a PERST handler), where are you
> supposted to alloc the memory for the BARs again?
> 
> Allocating them at link_up() is too late (because as soon as the link is
> up, the host is allowed to enumerate the EP BARs.) The proper place is to
> allocate them when receiving PERST, but not all drivers have a PERST handler.
> 
> (My understanding is that 1) PERST assert 2) PERST deassert 3) link is up.)
> 
> 
> 
> unbind() undos what was done in bind(), so shouldn't link_down() undo what was
> done in link_up()? With that logic, if you move the alloc to .core_init(),
> should we perhaps have a .core_deinit() callback for EPF drivers?
> (I guess only drivers which perform a reset during PERST would call this.)
> 
> But considering that free+alloc is not strictly needed, why not just keep
> the allocation + free in .bind()/.unbind() ?
> (To avoid the need to create a .core_deinit()), and let dw_pcie_ep_cleanup()
> call dw_pcie_ep_clear_bar() ?
> 
> I guess my point is that it seems a bit pointless for drivers that do not
> clear sticky registers to free+alloc memory on link down, for no good
> reason. (Memory might get fragmented over time, so it might not be possible
> to perform a big allocation after the device has been running for a really
> long time.)
> 
> 
> 
> So I'm thinking that we either
> 1) Keep the alloc/free in bind/unbind, and let dw_pcie_ep_cleanup() call
> dw_pcie_ep_clear_bar(),
> or
> 2) Introduce a .deinit_core() callback which will free the BARs.
> (Because I don't see how you will (re-)allocate memory for all drivers
> if you free the memory in link_down().)
> 

I think option 2 is the better solution. In my view, calling
dw_pcie_ep_clear_bar() from EPC drivers is a layering violation since the
allocation happens from EPF drivers.

So clearing the BARs during the deinit() callback that gets called when PERST#
assert happens is the way to go.

- Mani
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 2b11290aab4c..1205bfba8310 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -564,12 +564,19 @@  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 	return 0;
 }
 
-void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
+void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
-	struct pci_epc *epc = ep->epc;
 
 	dw_pcie_edma_remove(pci);
+}
+EXPORT_SYMBOL_GPL(dw_pcie_ep_cleanup);
+
+void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
+{
+	struct pci_epc *epc = ep->epc;
+
+	dw_pcie_ep_cleanup(ep);
 
 	pci_epc_mem_free_addr(epc, ep->msi_mem_phys, ep->msi_mem,
 			      epc->mem->window.page_size);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 61465203bb60..351d2fe3ea4d 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -672,6 +672,7 @@  int dw_pcie_ep_init(struct dw_pcie_ep *ep);
 int dw_pcie_ep_init_complete(struct dw_pcie_ep *ep);
 void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep);
 void dw_pcie_ep_deinit(struct dw_pcie_ep *ep);
+void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep);
 int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no);
 int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 			     u8 interrupt_num);
@@ -705,6 +706,10 @@  static inline void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
 {
 }
 
+static inline void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
+{
+}
+
 static inline int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
 {
 	return 0;
diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c
index 36e5e80cd22f..59b1c0110288 100644
--- a/drivers/pci/controller/dwc/pcie-qcom-ep.c
+++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c
@@ -507,6 +507,7 @@  static void qcom_pcie_perst_assert(struct dw_pcie *pci)
 		return;
 	}
 
+	dw_pcie_ep_cleanup(&pci->ep);
 	qcom_pcie_disable_resources(pcie_ep);
 	pcie_ep->link_status = QCOM_PCIE_EP_LINK_DISABLED;
 }
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 7afa9e9aabe2..68bfeed3429b 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -1715,6 +1715,8 @@  static void pex_ep_event_pex_rst_assert(struct tegra_pcie_dw *pcie)
 	if (ret)
 		dev_err(pcie->dev, "Failed to go Detect state: %d\n", ret);
 
+	dw_pcie_ep_cleanup(&pcie->pci.ep);
+
 	reset_control_assert(pcie->core_rst);
 
 	tegra_pcie_disable_phy(pcie);