diff mbox series

[1/3] arm64: dts: qcom: x1e80100: correct SWR1 pack mode

Message ID 20240227142725.625561-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Headers show
Series [1/3] arm64: dts: qcom: x1e80100: correct SWR1 pack mode | expand

Commit Message

Krzysztof Kozlowski Feb. 27, 2024, 2:27 p.m. UTC
Correct the SWR1 Soundwire controller port block pack mode to match
reference code.  Not sure if this has any impact.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Konrad Dybcio March 2, 2024, 12:01 a.m. UTC | #1
On 27.02.2024 15:27, Krzysztof Kozlowski wrote:
> Correct the SWR1 Soundwire controller port block pack mode to match
> reference code.  Not sure if this has any impact.

Probably it falls into the "undebuggable if present" kind of issues..

> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

I'm assuming your new source is correct-er

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
Bjorn Andersson March 19, 2024, 2:48 a.m. UTC | #2
On Tue, 27 Feb 2024 15:27:23 +0100, Krzysztof Kozlowski wrote:
> Correct the SWR1 Soundwire controller port block pack mode to match
> reference code.  Not sure if this has any impact.
> 
> 

Applied, thanks!

[3/3] arm64: defconfig: enable reset-gpio driver as module
      commit: cf30987a9ae9a8a430f957f8516b2092f6bab29d

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index c6b025503f4f..be4d2674151a 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -3430,7 +3430,7 @@  swr1: soundwire@6ad0000 {
 			qcom,ports-hstart =		/bits/ 8 <0xff 0x03 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-hstop =		/bits/ 8 <0xff 0x06 0x0f 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-word-length =	/bits/ 8 <0x01 0x07 0x04 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
-			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0x00 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode =	/bits/ 8 <0xff 0xff 0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x01 0x00 0x00 0x00 0x00 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;