diff mbox series

[V7,2/6] phy: freescale: add Samsung HDMI PHY

Message ID 20240227220444.77566-3-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series soc: imx8mp: Finish support for HDMI | expand

Commit Message

Adam Ford Feb. 27, 2024, 10:04 p.m. UTC
From: Lucas Stach <l.stach@pengutronix.de>

This adds the driver for the Samsung HDMI PHY found on the
i.MX8MP SoC. Based on downstream implementation from
Sandor Yu <Sandor.yu@nxp.com>.  According to the TRM, the PHY
receives parallel data from the link and serializes it.  It
also sets the PLL clock needed for the TX serializer.

Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> (v2)
Tested-by: Richard Leitner <richard.leitner@skidata.com> (v2)
Co-developed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de> # Kontron BL
Signed-off-by: Adam Ford <aford173@gmail.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
---
V6:  Set Kconfig dependency to include COMMON_CLK due to build
     errors

V5:  Remove an unnecessary include
     Migrate from of_clk_add_provider to of_clk_add_hw_provider
     Make const structures static
     Fix uninitialized variables and prevent div by 0
     Mark PM functions as __maybe_unused

V4:
- I (Adam) added a comment in the code for clarifcation
  based on questions from Luca concerning a difference
  between the code and the ref manual.
- Fixed the GENMASK on REG14
- Expanded the commit message briefly describing
  a bit more of what this driver does.
- Removed some unnecessary include files.

v3:
- use GENMASK/FIELD_PREP
- lowercase hex values
- correct coding style
v2:
- use DEFINE_RUNTIME_DEV_PM_OPS
---
 drivers/phy/freescale/Kconfig                |   6 +
 drivers/phy/freescale/Makefile               |   1 +
 drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 720 +++++++++++++++++++
 3 files changed, 727 insertions(+)
 create mode 100644 drivers/phy/freescale/phy-fsl-samsung-hdmi.c
diff mbox series

Patch

diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index 853958fb2c06..45aaaea14fb4 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -35,6 +35,12 @@  config PHY_FSL_IMX8M_PCIE
 	  Enable this to add support for the PCIE PHY as found on
 	  i.MX8M family of SOCs.
 
+config PHY_FSL_SAMSUNG_HDMI_PHY
+	tristate "Samsung HDMI PHY support"
+	depends on OF && HAS_IOMEM && COMMON_CLK
+	help
+	  Enable this to add support for the Samsung HDMI PHY in i.MX8MP.
+
 endif
 
 config PHY_FSL_LYNX_28G
diff --git a/drivers/phy/freescale/Makefile b/drivers/phy/freescale/Makefile
index cedb328bc4d2..c4386bfdb853 100644
--- a/drivers/phy/freescale/Makefile
+++ b/drivers/phy/freescale/Makefile
@@ -4,3 +4,4 @@  obj-$(CONFIG_PHY_MIXEL_LVDS_PHY)	+= phy-fsl-imx8qm-lvds-phy.o
 obj-$(CONFIG_PHY_MIXEL_MIPI_DPHY)	+= phy-fsl-imx8-mipi-dphy.o
 obj-$(CONFIG_PHY_FSL_IMX8M_PCIE)	+= phy-fsl-imx8m-pcie.o
 obj-$(CONFIG_PHY_FSL_LYNX_28G)		+= phy-fsl-lynx-28g.o
+obj-$(CONFIG_PHY_FSL_SAMSUNG_HDMI_PHY)	+= phy-fsl-samsung-hdmi.o
diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
new file mode 100644
index 000000000000..89e2c01f2ccf
--- /dev/null
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -0,0 +1,720 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ * Copyright 2022 Pengutronix, Lucas Stach <kernel@pengutronix.de>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+
+#define PHY_REG_00		0x00
+#define PHY_REG_01		0x04
+#define PHY_REG_02		0x08
+#define PHY_REG_08		0x20
+#define PHY_REG_09		0x24
+#define PHY_REG_10		0x28
+#define PHY_REG_11		0x2c
+
+#define PHY_REG_12		0x30
+#define  REG12_CK_DIV_MASK	GENMASK(5, 4)
+
+#define PHY_REG_13		0x34
+#define  REG13_TG_CODE_LOW_MASK	GENMASK(7, 0)
+
+#define PHY_REG_14		0x38
+#define  REG14_TOL_MASK		GENMASK(7, 4)
+#define  REG14_RP_CODE_MASK	GENMASK(3, 1)
+#define  REG14_TG_CODE_HIGH_MASK	GENMASK(0, 0)
+
+#define PHY_REG_15		0x3c
+#define PHY_REG_16		0x40
+#define PHY_REG_17		0x44
+#define PHY_REG_18		0x48
+#define PHY_REG_19		0x4c
+#define PHY_REG_20		0x50
+
+#define PHY_REG_21		0x54
+#define  REG21_SEL_TX_CK_INV	BIT(7)
+#define  REG21_PMS_S_MASK	GENMASK(3, 0)
+
+#define PHY_REG_22		0x58
+#define PHY_REG_23		0x5c
+#define PHY_REG_24		0x60
+#define PHY_REG_25		0x64
+#define PHY_REG_26		0x68
+#define PHY_REG_27		0x6c
+#define PHY_REG_28		0x70
+#define PHY_REG_29		0x74
+#define PHY_REG_30		0x78
+#define PHY_REG_31		0x7c
+#define PHY_REG_32		0x80
+
+/*
+ * REG33 does not match the ref manual. According to Sandor Yu from NXP,
+ * "There is a doc issue on the i.MX8MP latest RM"
+ * REG33 is being used per guidance from Sandor
+ */
+
+#define PHY_REG_33		0x84
+#define  REG33_MODE_SET_DONE	BIT(7)
+#define  REG33_FIX_DA		BIT(1)
+
+#define PHY_REG_34		0x88
+#define  REG34_PHY_READY	BIT(7)
+#define  REG34_PLL_LOCK		BIT(6)
+#define  REG34_PHY_CLK_READY	BIT(5)
+
+#define PHY_REG_35		0x8c
+#define PHY_REG_36		0x90
+#define PHY_REG_37		0x94
+#define PHY_REG_38		0x98
+#define PHY_REG_39		0x9c
+#define PHY_REG_40		0xa0
+#define PHY_REG_41		0xa4
+#define PHY_REG_42		0xa8
+#define PHY_REG_43		0xac
+#define PHY_REG_44		0xb0
+#define PHY_REG_45		0xb4
+#define PHY_REG_46		0xb8
+#define PHY_REG_47		0xbc
+
+#define PHY_PLL_DIV_REGS_NUM 6
+
+struct phy_config {
+	u32	pixclk;
+	u8	pll_div_regs[PHY_PLL_DIV_REGS_NUM];
+};
+
+static const struct phy_config phy_pll_cfg[] = {
+	{
+		.pixclk = 22250000,
+		.pll_div_regs = { 0x4b, 0xf1, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 23750000,
+		.pll_div_regs = { 0x50, 0xf1, 0x86, 0x85, 0x80, 0x40 },
+	}, {
+		.pixclk = 24000000,
+		.pll_div_regs = { 0x50, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 24024000,
+		.pll_div_regs = { 0x50, 0xf1, 0x99, 0x02, 0x80, 0x40 },
+	}, {
+		.pixclk = 25175000,
+		.pll_div_regs = { 0x54, 0xfc, 0xcc, 0x91, 0x80, 0x40 },
+	}, {
+		.pixclk = 25200000,
+		.pll_div_regs = { 0x54, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 26750000,
+		.pll_div_regs = { 0x5a, 0xf2, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 27000000,
+		.pll_div_regs = { 0x5a, 0xf0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 27027000,
+		.pll_div_regs = { 0x5a, 0xf2, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 29500000,
+		.pll_div_regs = { 0x62, 0xf4, 0x95, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 30750000,
+		.pll_div_regs = { 0x66, 0xf4, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 30888000,
+		.pll_div_regs = { 0x66, 0xf4, 0x99, 0x18, 0x88, 0x45 },
+	}, {
+		.pixclk = 33750000,
+		.pll_div_regs = { 0x70, 0xf4, 0x82, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 35000000,
+		.pll_div_regs = { 0x58, 0xb8, 0x8b, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 36000000,
+		.pll_div_regs = { 0x5a, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 36036000,
+		.pll_div_regs = { 0x5a, 0xb2, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 40000000,
+		.pll_div_regs = { 0x64, 0xb0, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 43200000,
+		.pll_div_regs = { 0x5a, 0x90, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 43243200,
+		.pll_div_regs = { 0x5a, 0x92, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 44500000,
+		.pll_div_regs = { 0x5c, 0x92, 0x98, 0x11, 0x84, 0x41 },
+	}, {
+		.pixclk = 47000000,
+		.pll_div_regs = { 0x62, 0x94, 0x95, 0x82, 0x80, 0x40 },
+	}, {
+		.pixclk = 47500000,
+		.pll_div_regs = { 0x63, 0x96, 0xa1, 0x82, 0x80, 0x40 },
+	}, {
+		.pixclk = 50349650,
+		.pll_div_regs = { 0x54, 0x7c, 0xc3, 0x8f, 0x80, 0x40 },
+	}, {
+		.pixclk = 50400000,
+		.pll_div_regs = { 0x54, 0x70, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 53250000,
+		.pll_div_regs = { 0x58, 0x72, 0x84, 0x03, 0x82, 0x41 },
+	}, {
+		.pixclk = 53500000,
+		.pll_div_regs = { 0x5a, 0x72, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 54000000,
+		.pll_div_regs = { 0x5a, 0x70, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 54054000,
+		.pll_div_regs = { 0x5a, 0x72, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 59000000,
+		.pll_div_regs = { 0x62, 0x74, 0x95, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 59340659,
+		.pll_div_regs = { 0x62, 0x74, 0xdb, 0x52, 0x88, 0x47 },
+	}, {
+		.pixclk = 59400000,
+		.pll_div_regs = { 0x63, 0x70, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 61500000,
+		.pll_div_regs = { 0x66, 0x74, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 63500000,
+		.pll_div_regs = { 0x69, 0x74, 0x89, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 67500000,
+		.pll_div_regs = { 0x54, 0x52, 0x87, 0x03, 0x80, 0x40 },
+	}, {
+		.pixclk = 70000000,
+		.pll_div_regs = { 0x58, 0x58, 0x8b, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 72000000,
+		.pll_div_regs = { 0x5a, 0x50, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 72072000,
+		.pll_div_regs = { 0x5a, 0x52, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 74176000,
+		.pll_div_regs = { 0x5d, 0x58, 0xdb, 0xA2, 0x88, 0x41 },
+	}, {
+		.pixclk = 74250000,
+		.pll_div_regs = { 0x5c, 0x52, 0x90, 0x0d, 0x84, 0x41 },
+	}, {
+		.pixclk = 78500000,
+		.pll_div_regs = { 0x62, 0x54, 0x87, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 80000000,
+		.pll_div_regs = { 0x64, 0x50, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 82000000,
+		.pll_div_regs = { 0x66, 0x54, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 82500000,
+		.pll_div_regs = { 0x67, 0x54, 0x88, 0x01, 0x90, 0x49 },
+	}, {
+		.pixclk = 89000000,
+		.pll_div_regs = { 0x70, 0x54, 0x84, 0x83, 0x80, 0x40 },
+	}, {
+		.pixclk = 90000000,
+		.pll_div_regs = { 0x70, 0x54, 0x82, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 94000000,
+		.pll_div_regs = { 0x4e, 0x32, 0xa7, 0x10, 0x80, 0x40 },
+	}, {
+		.pixclk = 95000000,
+		.pll_div_regs = { 0x50, 0x31, 0x86, 0x85, 0x80, 0x40 },
+	}, {
+		.pixclk = 98901099,
+		.pll_div_regs = { 0x52, 0x3a, 0xdb, 0x4c, 0x88, 0x47 },
+	}, {
+		.pixclk = 99000000,
+		.pll_div_regs = { 0x52, 0x32, 0x82, 0x01, 0x88, 0x47 },
+	}, {
+		.pixclk = 100699300,
+		.pll_div_regs = { 0x54, 0x3c, 0xc3, 0x8f, 0x80, 0x40 },
+	}, {
+		.pixclk = 100800000,
+		.pll_div_regs = { 0x54, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 102500000,
+		.pll_div_regs = { 0x55, 0x32, 0x8c, 0x05, 0x90, 0x4b },
+	}, {
+		.pixclk = 104750000,
+		.pll_div_regs = { 0x57, 0x32, 0x98, 0x07, 0x90, 0x49 },
+	}, {
+		.pixclk = 106500000,
+		.pll_div_regs = { 0x58, 0x32, 0x84, 0x03, 0x82, 0x41 },
+	}, {
+		.pixclk = 107000000,
+		.pll_div_regs = { 0x5a, 0x32, 0x89, 0x88, 0x80, 0x40 },
+	}, {
+		.pixclk = 108000000,
+		.pll_div_regs = { 0x5a, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 108108000,
+		.pll_div_regs = { 0x5a, 0x32, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 118000000,
+		.pll_div_regs = { 0x62, 0x34, 0x95, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 118800000,
+		.pll_div_regs = { 0x63, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 123000000,
+		.pll_div_regs = { 0x66, 0x34, 0x82, 0x01, 0x88, 0x45 },
+	}, {
+		.pixclk = 127000000,
+		.pll_div_regs = { 0x69, 0x34, 0x89, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 135000000,
+		.pll_div_regs = { 0x70, 0x34, 0x82, 0x01, 0x80, 0x40 },
+	}, {
+		.pixclk = 135580000,
+		.pll_div_regs = { 0x71, 0x39, 0xe9, 0x82, 0x9c, 0x5b },
+	}, {
+		.pixclk = 137520000,
+		.pll_div_regs = { 0x72, 0x38, 0x99, 0x10, 0x85, 0x41 },
+	}, {
+		.pixclk = 138750000,
+		.pll_div_regs = { 0x73, 0x35, 0x88, 0x05, 0x90, 0x4d },
+	}, {
+		.pixclk = 140000000,
+		.pll_div_regs = { 0x75, 0x36, 0xa7, 0x90, 0x80, 0x40 },
+	}, {
+		.pixclk = 144000000,
+		.pll_div_regs = { 0x78, 0x30, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 148352000,
+		.pll_div_regs = { 0x7b, 0x35, 0xdb, 0x39, 0x90, 0x45 },
+	}, {
+		.pixclk = 148500000,
+		.pll_div_regs = { 0x7b, 0x35, 0x84, 0x03, 0x90, 0x45 },
+	}, {
+		.pixclk = 154000000,
+		.pll_div_regs = { 0x40, 0x18, 0x83, 0x01, 0x00, 0x40 },
+	}, {
+		.pixclk = 157000000,
+		.pll_div_regs = { 0x41, 0x11, 0xa7, 0x14, 0x80, 0x40 },
+	}, {
+		.pixclk = 160000000,
+		.pll_div_regs = { 0x42, 0x12, 0xa1, 0x20, 0x80, 0x40 },
+	}, {
+		.pixclk = 162000000,
+		.pll_div_regs = { 0x43, 0x18, 0x8b, 0x08, 0x96, 0x55 },
+	}, {
+		.pixclk = 164000000,
+		.pll_div_regs = { 0x45, 0x11, 0x83, 0x82, 0x90, 0x4b },
+	}, {
+		.pixclk = 165000000,
+		.pll_div_regs = { 0x45, 0x11, 0x84, 0x81, 0x90, 0x4b },
+	}, {
+		.pixclk = 180000000,
+		.pll_div_regs = { 0x4b, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 185625000,
+		.pll_div_regs = { 0x4e, 0x12, 0x9a, 0x95, 0x80, 0x40 },
+	}, {
+		.pixclk = 188000000,
+		.pll_div_regs = { 0x4e, 0x12, 0xa7, 0x10, 0x80, 0x40 },
+	}, {
+		.pixclk = 198000000,
+		.pll_div_regs = { 0x52, 0x12, 0x82, 0x01, 0x88, 0x47 },
+	}, {
+		.pixclk = 205000000,
+		.pll_div_regs = { 0x55, 0x12, 0x8c, 0x05, 0x90, 0x4b },
+	}, {
+		.pixclk = 209500000,
+		.pll_div_regs = { 0x57, 0x12, 0x98, 0x07, 0x90, 0x49 },
+	}, {
+		.pixclk = 213000000,
+		.pll_div_regs = { 0x58, 0x12, 0x84, 0x03, 0x82, 0x41 },
+	}, {
+		.pixclk = 216000000,
+		.pll_div_regs = { 0x5a, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 216216000,
+		.pll_div_regs = { 0x5a, 0x12, 0xfd, 0x0c, 0x80, 0x40 },
+	}, {
+		.pixclk = 237600000,
+		.pll_div_regs = { 0x63, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 254000000,
+		.pll_div_regs = { 0x69, 0x14, 0x89, 0x08, 0x80, 0x40 },
+	}, {
+		.pixclk = 277500000,
+		.pll_div_regs = { 0x73, 0x15, 0x88, 0x05, 0x90, 0x4d },
+	}, {
+		.pixclk = 288000000,
+		.pll_div_regs = { 0x78, 0x10, 0x00, 0x00, 0x80, 0x00 },
+	}, {
+		.pixclk = 297000000,
+		.pll_div_regs = { 0x7b, 0x15, 0x84, 0x03, 0x90, 0x45 },
+	},
+};
+
+struct reg_settings {
+	u8 reg;
+	u8 val;
+};
+
+static const struct reg_settings common_phy_cfg[] = {
+	{ PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
+	{ PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
+	{ PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
+	/* REG12 pixclk specific */
+	/* REG13 pixclk specific */
+	/* REG14 pixclk specific */
+	{ PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
+	{ PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
+	{ PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
+	/* REG21 pixclk specific */
+	{ PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
+	{ PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
+	{ PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
+	{ PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
+	{ PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
+	{ PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
+	{ PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
+	{ PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
+	{ PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
+	{ PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
+	{ PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
+	{ PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
+	{ PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
+};
+
+struct fsl_samsung_hdmi_phy {
+	struct device *dev;
+	void __iomem *regs;
+	struct clk *apbclk;
+	struct clk *refclk;
+
+	/* clk provider */
+	struct clk_hw hw;
+	const struct phy_config *cur_cfg;
+};
+
+static inline struct fsl_samsung_hdmi_phy *
+to_fsl_samsung_hdmi_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct fsl_samsung_hdmi_phy, hw);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
+				      const struct phy_config *cfg)
+{
+	u8 div = 0x1;
+
+	switch (cfg->pixclk) {
+	case  22250000 ...  33750000:
+		div = 0xf;
+		break;
+	case  35000000 ...  40000000:
+		div = 0xb;
+		break;
+	case  43200000 ...  47500000:
+		div = 0x9;
+		break;
+	case  50349650 ...  63500000:
+		div = 0x7;
+		break;
+	case  67500000 ...  90000000:
+		div = 0x5;
+		break;
+	case  94000000 ... 148500000:
+		div = 0x3;
+		break;
+	case 154000000 ... 297000000:
+		div = 0x1;
+		break;
+	}
+
+	writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
+	       phy->regs + PHY_REG_21);
+}
+
+static void
+fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
+					    const struct phy_config *cfg)
+{
+	u32 pclk = cfg->pixclk;
+	u32 fld_tg_code;
+	u32 pclk_khz;
+	u8 div = 1;
+
+	switch (cfg->pixclk) {
+	case  22250000 ...  47500000:
+		div = 1;
+		break;
+	case  50349650 ...  99000000:
+		div = 2;
+		break;
+	case 100699300 ... 198000000:
+		div = 4;
+		break;
+	case 205000000 ... 297000000:
+		div = 8;
+		break;
+	}
+
+	writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
+
+	/*
+	 * Calculation for the frequency lock detector target code (fld_tg_code)
+	 * is based on reference manual register description of PHY_REG13
+	 * (13.10.3.1.14.2):
+	 *   1st) Calculate int_pllclk which is determinded by FLD_CK_DIV
+	 *   2nd) Increase resolution to avoid rounding issues
+	 *   3th) Do the div (256 / Freq. of int_pllclk) * 24
+	 *   4th) Reduce the resolution and always round up since the NXP
+	 *        settings rounding up always too. TODO: Check if that is
+	 *        correct.
+	 */
+	pclk /= div;
+	pclk_khz = pclk / 1000;
+	fld_tg_code = 256 * 1000 * 1000 / pclk_khz * 24;
+	fld_tg_code = DIV_ROUND_UP(fld_tg_code, 1000);
+
+	/* FLD_TOL and FLD_RP_CODE taken from downstream driver */
+	writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
+	       phy->regs + PHY_REG_13);
+	writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
+	       FIELD_PREP(REG14_RP_CODE_MASK, 2) |
+	       FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
+	       phy->regs + PHY_REG_14);
+}
+
+static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
+					  const struct phy_config *cfg)
+{
+	int i, ret;
+	u8 val;
+
+	/* HDMI PHY init */
+	writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
+
+	/* common PHY registers */
+	for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
+		writeb(common_phy_cfg[i].val, phy->regs + common_phy_cfg[i].reg);
+
+	/* set individual PLL registers PHY_REG2 ... PHY_REG7 */
+	for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
+		writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
+
+	fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
+	fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
+
+	writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
+
+	ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
+				 val & REG34_PLL_LOCK, 50, 20000);
+	if (ret)
+		dev_err(phy->dev, "PLL failed to lock\n");
+
+	return ret;
+}
+
+static unsigned long phy_clk_recalc_rate(struct clk_hw *hw,
+					 unsigned long parent_rate)
+{
+	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+
+	if (!phy->cur_cfg)
+		return 74250000;
+
+	return phy->cur_cfg->pixclk;
+}
+
+static long phy_clk_round_rate(struct clk_hw *hw,
+			       unsigned long rate, unsigned long *parent_rate)
+{
+	int i;
+
+	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+		if (phy_pll_cfg[i].pixclk <= rate)
+			return phy_pll_cfg[i].pixclk;
+
+	return -EINVAL;
+}
+
+static int phy_clk_set_rate(struct clk_hw *hw,
+			    unsigned long rate, unsigned long parent_rate)
+{
+	struct fsl_samsung_hdmi_phy *phy = to_fsl_samsung_hdmi_phy(hw);
+	int i;
+
+	for (i = ARRAY_SIZE(phy_pll_cfg) - 1; i >= 0; i--)
+		if (phy_pll_cfg[i].pixclk <= rate)
+			break;
+
+	if (i < 0)
+		return -EINVAL;
+
+	phy->cur_cfg = &phy_pll_cfg[i];
+
+	return fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+}
+
+static const struct clk_ops phy_clk_ops = {
+	.recalc_rate = phy_clk_recalc_rate,
+	.round_rate = phy_clk_round_rate,
+	.set_rate = phy_clk_set_rate,
+};
+
+static int phy_clk_register(struct fsl_samsung_hdmi_phy *phy)
+{
+	struct device *dev = phy->dev;
+	struct device_node *np = dev->of_node;
+	struct clk_init_data init;
+	const char *parent_name;
+	struct clk *phyclk;
+	int ret;
+
+	parent_name = __clk_get_name(phy->refclk);
+
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+	init.flags = 0;
+	init.name = "hdmi_pclk";
+	init.ops = &phy_clk_ops;
+
+	phy->hw.init = &init;
+
+	phyclk = devm_clk_register(dev, &phy->hw);
+	if (IS_ERR(phyclk))
+		return dev_err_probe(dev, PTR_ERR(phyclk),
+				     "failed to register clock\n");
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, phyclk);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to register clock provider\n");
+
+	return 0;
+}
+
+static int fsl_samsung_hdmi_phy_probe(struct platform_device *pdev)
+{
+	struct fsl_samsung_hdmi_phy *phy;
+	int ret;
+
+	phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+	if (!phy)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, phy);
+	phy->dev = &pdev->dev;
+
+	phy->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(phy->regs))
+		return PTR_ERR(phy->regs);
+
+	phy->apbclk = devm_clk_get(phy->dev, "apb");
+	if (IS_ERR(phy->apbclk))
+		return dev_err_probe(phy->dev, PTR_ERR(phy->apbclk),
+				     "failed to get apb clk\n");
+
+	phy->refclk = devm_clk_get(phy->dev, "ref");
+	if (IS_ERR(phy->refclk))
+		return dev_err_probe(phy->dev, PTR_ERR(phy->refclk),
+				     "failed to get ref clk\n");
+
+	ret = clk_prepare_enable(phy->apbclk);
+	if (ret) {
+		dev_err(phy->dev, "failed to enable apbclk\n");
+		return ret;
+	}
+
+	pm_runtime_get_noresume(phy->dev);
+	pm_runtime_set_active(phy->dev);
+	pm_runtime_enable(phy->dev);
+
+	ret = phy_clk_register(phy);
+	if (ret) {
+		dev_err(&pdev->dev, "register clk failed\n");
+		goto register_clk_failed;
+	}
+
+	pm_runtime_put(phy->dev);
+
+	return 0;
+
+register_clk_failed:
+	clk_disable_unprepare(phy->apbclk);
+
+	return ret;
+}
+
+static int fsl_samsung_hdmi_phy_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_suspend(struct device *dev)
+{
+	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(phy->apbclk);
+
+	return 0;
+}
+
+static int __maybe_unused fsl_samsung_hdmi_phy_resume(struct device *dev)
+{
+	struct fsl_samsung_hdmi_phy *phy = dev_get_drvdata(dev);
+	int ret = 0;
+
+	ret = clk_prepare_enable(phy->apbclk);
+	if (ret) {
+		dev_err(phy->dev, "failed to enable apbclk\n");
+		return ret;
+	}
+
+	if (phy->cur_cfg)
+		ret = fsl_samsung_hdmi_phy_configure(phy, phy->cur_cfg);
+
+	return ret;
+
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(fsl_samsung_hdmi_phy_pm_ops,
+				 fsl_samsung_hdmi_phy_suspend,
+				 fsl_samsung_hdmi_phy_resume, NULL);
+
+static const struct of_device_id fsl_samsung_hdmi_phy_of_match[] = {
+	{
+		.compatible = "fsl,imx8mp-hdmi-phy",
+	}, {
+		/* sentinel */
+	}
+};
+MODULE_DEVICE_TABLE(of, fsl_samsung_hdmi_phy_of_match);
+
+static struct platform_driver fsl_samsung_hdmi_phy_driver = {
+	.probe  = fsl_samsung_hdmi_phy_probe,
+	.remove = fsl_samsung_hdmi_phy_remove,
+	.driver = {
+		.name = "fsl-samsung-hdmi-phy",
+		.of_match_table = fsl_samsung_hdmi_phy_of_match,
+		.pm = pm_ptr(&fsl_samsung_hdmi_phy_pm_ops),
+	},
+};
+module_platform_driver(fsl_samsung_hdmi_phy_driver);
+
+MODULE_AUTHOR("Sandor Yu <Sandor.yu@nxp.com>");
+MODULE_DESCRIPTION("SAMSUNG HDMI 2.0 Transmitter PHY Driver");
+MODULE_LICENSE("GPL");