diff mbox series

[v2,03/30] dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible

Message ID 20240228-mbly-gpio-v2-3-3ba757474006@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Rework Nomadik GPIO to add Mobileye EyeQ5 support | expand

Commit Message

Théo Lebrun Feb. 28, 2024, 11:28 a.m. UTC
This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
compatible to the dt-bindings. One difference is that the block as
integrated on EyeQ5 does not support sleep-mode.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 .../devicetree/bindings/gpio/st,nomadik-gpio.yaml          | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

Comments

Conor Dooley Feb. 28, 2024, 12:46 p.m. UTC | #1
On Wed, Feb 28, 2024 at 12:28:01PM +0100, Théo Lebrun wrote:
> This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
> compatible to the dt-bindings. One difference is that the block as
> integrated on EyeQ5 does not support sleep-mode.
> 
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Acked-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
Linus Walleij Feb. 29, 2024, 9:19 a.m. UTC | #2
On Wed, Feb 28, 2024 at 12:28 PM Théo Lebrun <theo.lebrun@bootlin.com> wrote:

> This GPIO controller is used on the Mobileye EyeQ5 SoC. Add its
> compatible to the dt-bindings. One difference is that the block as
> integrated on EyeQ5 does not support sleep-mode.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Patch applied!

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
index 4080e94702d5..8e7f21988e9e 100644
--- a/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/st,nomadik-gpio.yaml
@@ -19,7 +19,9 @@  properties:
     pattern: "^gpio@[0-9a-f]+$"
 
   compatible:
-    const: st,nomadik-gpio
+    enum:
+      - st,nomadik-gpio
+      - mobileye,eyeq5-gpio
 
   reg:
     maxItems: 1
@@ -66,6 +68,16 @@  required:
 
 unevaluatedProperties: false
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: mobileye,eyeq5-gpio
+    then:
+      properties:
+        st,supports-sleepmode: false
+
 examples:
   - |
     gpio1: gpio@8012e080 {