diff mbox series

[2/2] arm64: dts: imx8mp-beacon-kit: Enable HDMI bridge HPD

Message ID 20240228113737.43434-2-aford173@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/2] drm/bridge: adv7511: Allow IRQ to share GPIO pins | expand

Commit Message

Adam Ford Feb. 28, 2024, 11:37 a.m. UTC
The DSI to HDMI bridge supports hot-plut-detect, but the
driver didn't previously support a shared IRQ GPIO.  With
the driver updated, the interrupt can be added to the bridge.

Signed-off-by: Adam Ford <aford173@gmail.com>

Comments

Laurent Pinchart Feb. 28, 2024, 4:33 p.m. UTC | #1
Hi Adam,

Thank you for the patch.

On Wed, Feb 28, 2024 at 05:37:36AM -0600, Adam Ford wrote:
> The DSI to HDMI bridge supports hot-plut-detect, but the
> driver didn't previously support a shared IRQ GPIO.  With
> the driver updated, the interrupt can be added to the bridge.

You can reflow the commit message to 72 columns.

> Signed-off-by: Adam Ford <aford173@gmail.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> index 8de4dd268908..d854c94ec997 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> @@ -405,6 +405,8 @@ adv_bridge: hdmi@3d {
>  		compatible = "adi,adv7535";
>  		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
>  		reg-names = "main", "cec", "edid", "packet";
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
>  		adi,dsi-lanes = <4>;
>  		#sound-dai-cells = <0>;
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
index 8de4dd268908..d854c94ec997 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
@@ -405,6 +405,8 @@  adv_bridge: hdmi@3d {
 		compatible = "adi,adv7535";
 		reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
 		reg-names = "main", "cec", "edid", "packet";
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
 		adi,dsi-lanes = <4>;
 		#sound-dai-cells = <0>;