diff mbox series

[v2,11/11] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor

Message ID 20240229-mbly-i2c-v2-11-b32ed18c098c@bootlin.com (mailing list archive)
State New, archived
Headers show
Series Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts | expand

Commit Message

Théo Lebrun Feb. 29, 2024, 6:10 p.m. UTC
Declare the temperature sensor on I2C bus 2. Its label is the schematics
identifier.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
---
 arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

Comments

Linus Walleij Feb. 29, 2024, 9:09 p.m. UTC | #1
On Thu, Feb 29, 2024 at 7:11 PM Théo Lebrun <theo.lebrun@bootlin.com> wrote:

> Declare the temperature sensor on I2C bus 2. Its label is the schematics
> identifier.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
index 6898b2d8267d..9fc1a1b0a81b 100644
--- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
+++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
@@ -21,3 +21,11 @@  memory@0 {
 		      <0x8 0x02000000 0x0 0x7E000000>;
 	};
 };
+
+&i2c2 {
+	temperature-sensor@48 {
+		compatible = "ti,tmp112";
+		reg = <0x48>;
+		label = "U60";
+	};
+};