diff mbox series

[3/5] soc: mediatek: mtk-cmdq: Add cmdq_pkt_poll_addr() function

Message ID 20240301111126.22035-4-jason-jh.lin@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add CMDQ API for upcoming ISP feature | expand

Commit Message

Jason-JH Lin (林睿祥) March 1, 2024, 11:11 a.m. UTC
Add cmdq_pkt_poll_addr function to support CMDQ user making
an instruction for polling a specific address of hardware rigster
to check the value with or without mask.

POLL is an old operation in GCE, so it does not support SPR and
CMDQ_CODE_LOGIC. CMDQ users need to use GPR and CMDQ_CODE_MASK
to move polling register address to GPR to make an instruction.
This will be done in cmdq_pkt_poll_addr().

Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Change-Id: I91ff98e06570dc4501187eb29de64aaa65b1cf13
---
 drivers/soc/mediatek/mtk-cmdq-helper.c | 38 ++++++++++++++++++++++++++
 include/linux/soc/mediatek/mtk-cmdq.h  | 16 +++++++++++
 2 files changed, 54 insertions(+)

Comments

AngeloGioacchino Del Regno March 4, 2024, 10:05 a.m. UTC | #1
Il 01/03/24 12:11, Jason-JH.Lin ha scritto:
> Add cmdq_pkt_poll_addr function to support CMDQ user making
> an instruction for polling a specific address of hardware rigster
> to check the value with or without mask.
> 
> POLL is an old operation in GCE, so it does not support SPR and

POLL is a legacy operation in GCE, so it does not support .....

> CMDQ_CODE_LOGIC. CMDQ users need to use GPR and CMDQ_CODE_MASK
> to move polling register address to GPR to make an instruction.
> This will be done in cmdq_pkt_poll_addr().
> 
> Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
> Change-Id: I91ff98e06570dc4501187eb29de64aaa65b1cf13
> ---
>   drivers/soc/mediatek/mtk-cmdq-helper.c | 38 ++++++++++++++++++++++++++
>   include/linux/soc/mediatek/mtk-cmdq.h  | 16 +++++++++++
>   2 files changed, 54 insertions(+)
> 
> diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
> index 3a1e47ad8a41..2e9fc9bb1183 100644
> --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> @@ -12,6 +12,7 @@
>   
>   #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
>   #define CMDQ_POLL_ENABLE_MASK	BIT(0)
> +#define CMDQ_POLL_HIGH_ADDR_GPR	(14)
>   #define CMDQ_EOC_IRQ_EN		BIT(0)
>   #define CMDQ_REG_TYPE		1
>   #define CMDQ_JUMP_RELATIVE	1
> @@ -406,6 +407,43 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>   }
>   EXPORT_SYMBOL(cmdq_pkt_poll_mask);
>   
> +int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask)
> +{
> +	struct cmdq_instruction inst = { {0} };
> +	int err;
> +	u8 use_mask = 0;
> +
> +	if (mask != U32_MAX) {

inst.op = CMDQ_CODE_MASK;

/* Describe what you're doing here as a comment please */
if (mask < GENMASK(31, 0)) {
	inst.mask = ~mask;
	err = cmdq_pkt_append_command ...
	use_mask ...
}

/* POLL is a legacy operation in GCE and ... etc etc */
inst.mask = addr;
inst.dst_t = ...
inst.sop = ...
err = cmdq_pkt_append... etc etc etc


> +		inst.op = CMDQ_CODE_MASK;
> +		inst.mask = ~mask;
> +		err = cmdq_pkt_append_command(pkt, inst);
> +		if (err != 0)
> +			return err;
> +		use_mask = CMDQ_POLL_ENABLE_MASK;
> +	}
> +
> +	/*
> +	 * POLL is an old operation in GCE and it does not support SPR and CMDQ_CODE_LOGIC,
> +	 * so it can not use cmdq_pkt_assign to keep polling register address to SPR.
> +	 * It needs to use GPR and CMDQ_CODE_MASK to move polling register address to GPR.
> +	 */
> +	inst.op = CMDQ_CODE_MASK;
> +	inst.dst_t = CMDQ_REG_TYPE;
> +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
> +	inst.mask = addr;
> +	err = cmdq_pkt_append_command(pkt, inst);
> +	if (err < 0)
> +		return err;
> +
> +	inst.op = CMDQ_CODE_POLL;
> +	inst.dst_t = CMDQ_REG_TYPE;
> +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;

This is a reassignment of the same value. You can do it like

/* dst_t and sop must be CMDQ_REG_TYPE, CMDQ_POLL_HIGH_ADDR_GPR */
inst.op = CMDQ_CODE_POLL;
inst.offset ...
inst.value ....

(but you're also inheriting the same `inst.mask`, was that intended?)

err = cmdq_pkt_append ....
if (err < 0)
	return err;

return 0
}

> +	inst.offset = use_mask;
> +	inst.value = value;
> +	return cmdq_pkt_append_command(pkt, inst);
> +}
> +EXPORT_SYMBOL(cmdq_pkt_poll_addr);
> +
>   int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
>   {
>   	struct cmdq_instruction inst = {};
> diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
> index b6dbe2d8f16a..2fe9be240fbc 100644
> --- a/include/linux/soc/mediatek/mtk-cmdq.h
> +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> @@ -253,6 +253,22 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
>   int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
>   		       u16 offset, u32 value, u32 mask);
>   
> +/**
> + * cmdq_pkt_poll_addr() - Append polling command to the CMDQ packet, ask GCE to
> + *			 execute an instruction that wait for a specified
> + *			 address of hardware register to check for the value
> + *			 w/ or w/o mask.
> + *			 All GCE hardware threads will be blocked by this
> + *			 instruction.

/**
  * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ packet
  * @pkt:	the CMDQ packet
  * @addr:	the hardware register address
  * @value:	the specified target register value
  * @mask:	the specified target register mask
  *
  * Appends a polling (POLL) command to the CMDQ packet and asks the GCE
  * to execute an instruction that checks for the specified `value` (with
  * or without `mask`) to appear in the specified hardware register `addr`.
  * All GCE threads will be blocked by this instruction.
  *
  * Return: 0 for success or negative error code
  */

That's better, isn't it? :-)

Cheers,
Angelo
Jason-JH Lin (林睿祥) March 5, 2024, 1:32 a.m. UTC | #2
Hi Angelo, 

Thanks for the reviews.

On Mon, 2024-03-04 at 11:05 +0100, AngeloGioacchino Del Regno wrote:
> Il 01/03/24 12:11, Jason-JH.Lin ha scritto:
> > Add cmdq_pkt_poll_addr function to support CMDQ user making
> > an instruction for polling a specific address of hardware rigster
> > to check the value with or without mask.
> > 
> > POLL is an old operation in GCE, so it does not support SPR and
> 
> POLL is a legacy operation in GCE, so it does not support .....
> 
OK, I'll change that.

> > CMDQ_CODE_LOGIC. CMDQ users need to use GPR and CMDQ_CODE_MASK
> > to move polling register address to GPR to make an instruction.
> > This will be done in cmdq_pkt_poll_addr().
> > 
> > Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
> > Change-Id: I91ff98e06570dc4501187eb29de64aaa65b1cf13
> > ---
> >   drivers/soc/mediatek/mtk-cmdq-helper.c | 38
> > ++++++++++++++++++++++++++
> >   include/linux/soc/mediatek/mtk-cmdq.h  | 16 +++++++++++
> >   2 files changed, 54 insertions(+)
> > 
> > diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > index 3a1e47ad8a41..2e9fc9bb1183 100644
> > --- a/drivers/soc/mediatek/mtk-cmdq-helper.c
> > +++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
> > @@ -12,6 +12,7 @@
> >   
> >   #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
> >   #define CMDQ_POLL_ENABLE_MASK	BIT(0)
> > +#define CMDQ_POLL_HIGH_ADDR_GPR	(14)
> >   #define CMDQ_EOC_IRQ_EN		BIT(0)
> >   #define CMDQ_REG_TYPE		1
> >   #define CMDQ_JUMP_RELATIVE	1
> > @@ -406,6 +407,43 @@ int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt,
> > u8 subsys,
> >   }
> >   EXPORT_SYMBOL(cmdq_pkt_poll_mask);
> >   
> > +int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32
> > value, u32 mask)
> > +{
> > +	struct cmdq_instruction inst = { {0} };
> > +	int err;
> > +	u8 use_mask = 0;
> > +
> > +	if (mask != U32_MAX) {
> 
> inst.op = CMDQ_CODE_MASK;
> 
> /* Describe what you're doing here as a comment please */
> if (mask < GENMASK(31, 0)) {
> 	inst.mask = ~mask;
> 	err = cmdq_pkt_append_command ...
> 	use_mask ...
> }
OK, I'll change the U32_MAX to GENMASK(31, 0).

> 
> /* POLL is a legacy operation in GCE and ... etc etc */
> inst.mask = addr;
> inst.dst_t = ...
> inst.sop = ...
> err = cmdq_pkt_append... etc etc etc
> 
OK, I'll change like this and I'll use inst.value = addr;
because addr is not mask.

> 
> > +		inst.op = CMDQ_CODE_MASK;
> > +		inst.mask = ~mask;
> > +		err = cmdq_pkt_append_command(pkt, inst);
> > +		if (err != 0)
> > +			return err;
> > +		use_mask = CMDQ_POLL_ENABLE_MASK;
> > +	}
> > +
> > +	/*
> > +	 * POLL is an old operation in GCE and it does not support SPR
> > and CMDQ_CODE_LOGIC,
> > +	 * so it can not use cmdq_pkt_assign to keep polling register
> > address to SPR.
> > +	 * It needs to use GPR and CMDQ_CODE_MASK to move polling
> > register address to GPR.
> > +	 */
> > +	inst.op = CMDQ_CODE_MASK;
> > +	inst.dst_t = CMDQ_REG_TYPE;
> > +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
> > +	inst.mask = addr;
> > +	err = cmdq_pkt_append_command(pkt, inst);
> > +	if (err < 0)
> > +		return err;
> > +
> > +	inst.op = CMDQ_CODE_POLL;
> > +	inst.dst_t = CMDQ_REG_TYPE;
> > +	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
> 
> This is a reassignment of the same value. You can do it like
> 
> /* dst_t and sop must be CMDQ_REG_TYPE, CMDQ_POLL_HIGH_ADDR_GPR */
> inst.op = CMDQ_CODE_POLL;
> inst.offset ...
> inst.value ....
> 
inst is used to generate an instruction for GCE, so it will be
reassigned every time after calling cmdq_pkt_append_command(pkt, inst);
to append a generated inst into the cmd buffer.

> (but you're also inheriting the same `inst.mask`, was that intended?)
> 
The definition of cmdq_instruction is:

struct cmdq_instruction {
	union {
		u32 value;
		u32 mask;
		struct {
			u16 arg_c;
			u16 src_reg;
		};
	};
	union {
		u16 offset;
		u16 event;
		u16 reg_dst;
	};
	...
};

so inst.mask and inst.value are the same u32 in inst.
That means inst.mask has been reassigned as the inst.value here.

> err = cmdq_pkt_append ....
> if (err < 0)
> 	return err;
> 
> return 0
> }

OK, I'll change it to return 0.

> 
> > +	inst.offset = use_mask;
> > +	inst.value = value;
> > +	return cmdq_pkt_append_command(pkt, inst);
> > +}
> > +EXPORT_SYMBOL(cmdq_pkt_poll_addr);
> > +
> >   int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
> >   {
> >   	struct cmdq_instruction inst = {};
> > diff --git a/include/linux/soc/mediatek/mtk-cmdq.h
> > b/include/linux/soc/mediatek/mtk-cmdq.h
> > index b6dbe2d8f16a..2fe9be240fbc 100644
> > --- a/include/linux/soc/mediatek/mtk-cmdq.h
> > +++ b/include/linux/soc/mediatek/mtk-cmdq.h
> > @@ -253,6 +253,22 @@ int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8
> > subsys,
> >   int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
> >   		       u16 offset, u32 value, u32 mask);
> >   
> > +/**
> > + * cmdq_pkt_poll_addr() - Append polling command to the CMDQ
> > packet, ask GCE to
> > + *			 execute an instruction that wait for a
> > specified
> > + *			 address of hardware register to check for the
> > value
> > + *			 w/ or w/o mask.
> > + *			 All GCE hardware threads will be blocked by
> > this
> > + *			 instruction.
> 
> /**
>   * cmdq_pkt_poll_addr() - Append blocking POLL command to CMDQ
> packet
>   * @pkt:	the CMDQ packet
>   * @addr:	the hardware register address
>   * @value:	the specified target register value
>   * @mask:	the specified target register mask
>   *
>   * Appends a polling (POLL) command to the CMDQ packet and asks the
> GCE
>   * to execute an instruction that checks for the specified `value`
> (with
>   * or without `mask`) to appear in the specified hardware register
> `addr`.
>   * All GCE threads will be blocked by this instruction.
>   *
>   * Return: 0 for success or negative error code
>   */
> 
> That's better, isn't it? :-)
> 
OK, I'll change that. Thanks for making the entire sample.

Regards,
Jason-JH.Lin

> Cheers,
> Angelo
> 
>
diff mbox series

Patch

diff --git a/drivers/soc/mediatek/mtk-cmdq-helper.c b/drivers/soc/mediatek/mtk-cmdq-helper.c
index 3a1e47ad8a41..2e9fc9bb1183 100644
--- a/drivers/soc/mediatek/mtk-cmdq-helper.c
+++ b/drivers/soc/mediatek/mtk-cmdq-helper.c
@@ -12,6 +12,7 @@ 
 
 #define CMDQ_WRITE_ENABLE_MASK	BIT(0)
 #define CMDQ_POLL_ENABLE_MASK	BIT(0)
+#define CMDQ_POLL_HIGH_ADDR_GPR	(14)
 #define CMDQ_EOC_IRQ_EN		BIT(0)
 #define CMDQ_REG_TYPE		1
 #define CMDQ_JUMP_RELATIVE	1
@@ -406,6 +407,43 @@  int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
 }
 EXPORT_SYMBOL(cmdq_pkt_poll_mask);
 
+int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask)
+{
+	struct cmdq_instruction inst = { {0} };
+	int err;
+	u8 use_mask = 0;
+
+	if (mask != U32_MAX) {
+		inst.op = CMDQ_CODE_MASK;
+		inst.mask = ~mask;
+		err = cmdq_pkt_append_command(pkt, inst);
+		if (err != 0)
+			return err;
+		use_mask = CMDQ_POLL_ENABLE_MASK;
+	}
+
+	/*
+	 * POLL is an old operation in GCE and it does not support SPR and CMDQ_CODE_LOGIC,
+	 * so it can not use cmdq_pkt_assign to keep polling register address to SPR.
+	 * It needs to use GPR and CMDQ_CODE_MASK to move polling register address to GPR.
+	 */
+	inst.op = CMDQ_CODE_MASK;
+	inst.dst_t = CMDQ_REG_TYPE;
+	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
+	inst.mask = addr;
+	err = cmdq_pkt_append_command(pkt, inst);
+	if (err < 0)
+		return err;
+
+	inst.op = CMDQ_CODE_POLL;
+	inst.dst_t = CMDQ_REG_TYPE;
+	inst.sop = CMDQ_POLL_HIGH_ADDR_GPR;
+	inst.offset = use_mask;
+	inst.value = value;
+	return cmdq_pkt_append_command(pkt, inst);
+}
+EXPORT_SYMBOL(cmdq_pkt_poll_addr);
+
 int cmdq_pkt_assign(struct cmdq_pkt *pkt, u16 reg_idx, u32 value)
 {
 	struct cmdq_instruction inst = {};
diff --git a/include/linux/soc/mediatek/mtk-cmdq.h b/include/linux/soc/mediatek/mtk-cmdq.h
index b6dbe2d8f16a..2fe9be240fbc 100644
--- a/include/linux/soc/mediatek/mtk-cmdq.h
+++ b/include/linux/soc/mediatek/mtk-cmdq.h
@@ -253,6 +253,22 @@  int cmdq_pkt_poll(struct cmdq_pkt *pkt, u8 subsys,
 int cmdq_pkt_poll_mask(struct cmdq_pkt *pkt, u8 subsys,
 		       u16 offset, u32 value, u32 mask);
 
+/**
+ * cmdq_pkt_poll_addr() - Append polling command to the CMDQ packet, ask GCE to
+ *			 execute an instruction that wait for a specified
+ *			 address of hardware register to check for the value
+ *			 w/ or w/o mask.
+ *			 All GCE hardware threads will be blocked by this
+ *			 instruction.
+ * @pkt:	the CMDQ packet
+ * @addr:	the hardware register address
+ * @value:	the specified target register value
+ * @mask:	the specified target register mask
+ *
+ * Return: 0 for success; else the error code is returned
+ */
+int cmdq_pkt_poll_addr(struct cmdq_pkt *pkt, dma_addr_t addr, u32 value, u32 mask);
+
 /**
  * cmdq_pkt_assign() - Append logic assign command to the CMDQ packet, ask GCE
  *		       to execute an instruction that set a constant value into