diff mbox series

[v9,10/10] PCI: dwc: ep: Add Kernel-doc comments for APIs

Message ID 20240304-pci-dbi-rework-v9-10-29d433d99cda@linaro.org (mailing list archive)
State New, archived
Headers show
Series PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host | expand

Commit Message

Manivannan Sadhasivam March 4, 2024, 9:22 a.m. UTC
All of the APIs are missing the Kernel-doc comments. Hence, add them.

Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 drivers/pci/controller/dwc/pcie-designware-ep.c | 94 +++++++++++++++++++++++++
 1 file changed, 94 insertions(+)

Comments

Niklas Cassel March 7, 2024, 9:58 p.m. UTC | #1
On Mon, Mar 04, 2024 at 02:52:22PM +0530, Manivannan Sadhasivam wrote:
> All of the APIs are missing the Kernel-doc comments. Hence, add them.
> 
> Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---

For the functions that you added in this series, e.g.
dw_pcie_ep_cleanup(), dw_pcie_ep_init_non_sticky_registers(),
and dw_pcie_ep_linkdown(), I think that it would have been
better if you actually added the kdoc in the same commit that
added the respective function.


For the existing functions that did not have a kdoc, I think
it would have been better if you fixed this as patch 1/10 in
this series. (Or 2/10, in case you keep the Fixes tag for the
"PCI: dwc: ep: Fix DBI access failure for drivers requiring
refclk from host" patch.)

Yes, I know that you rename some of these functions that
lacked kdoc later in the series, but the whole kdoc description
would be the same, the kdoc parameters would be the same, and the
kdoc return value would be the same.

If you later rename a function, you would only need to change
the kdoc function name (in addition to the function declaration
itself).


Kind regards,
Niklas
Manivannan Sadhasivam March 8, 2024, 5:43 a.m. UTC | #2
On Thu, Mar 07, 2024 at 10:58:12PM +0100, Niklas Cassel wrote:
> On Mon, Mar 04, 2024 at 02:52:22PM +0530, Manivannan Sadhasivam wrote:
> > All of the APIs are missing the Kernel-doc comments. Hence, add them.
> > 
> > Reviewed-by: Frank Li <Frank.Li@nxp.com>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> 
> For the functions that you added in this series, e.g.
> dw_pcie_ep_cleanup(), dw_pcie_ep_init_non_sticky_registers(),
> and dw_pcie_ep_linkdown(), I think that it would have been
> better if you actually added the kdoc in the same commit that
> added the respective function.
> 
> 
> For the existing functions that did not have a kdoc, I think
> it would have been better if you fixed this as patch 1/10 in
> this series. (Or 2/10, in case you keep the Fixes tag for the
> "PCI: dwc: ep: Fix DBI access failure for drivers requiring
> refclk from host" patch.)
> 
> Yes, I know that you rename some of these functions that
> lacked kdoc later in the series, but the whole kdoc description
> would be the same, the kdoc parameters would be the same, and the
> kdoc return value would be the same.
> 
> If you later rename a function, you would only need to change
> the kdoc function name (in addition to the function declaration
> itself).
> 

Makes sense! Will change it.

- Mani
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index fed4c2936c78..1f33f2929c2b 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -14,6 +14,11 @@ 
 #include <linux/pci-epc.h>
 #include <linux/pci-epf.h>
 
+/**
+ * dw_pcie_ep_init_notify - Notify EPF drivers about EPC initialization
+ *			    complete
+ * @ep: DWC EP device
+ */
 void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -22,6 +27,14 @@  void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_init_notify);
 
+/**
+ * dw_pcie_ep_get_func_from_ep - Get the struct dw_pcie_ep_func corresponding to
+ *				 the endpoint function
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint device
+ *
+ * Return: struct dw_pcie_ep_func if success, NULL otherwise.
+ */
 struct dw_pcie_ep_func *
 dw_pcie_ep_get_func_from_ep(struct dw_pcie_ep *ep, u8 func_no)
 {
@@ -52,6 +65,11 @@  static void __dw_pcie_ep_reset_bar(struct dw_pcie *pci, u8 func_no,
 	dw_pcie_dbi_ro_wr_dis(pci);
 }
 
+/**
+ * dw_pcie_ep_reset_bar - Reset endpoint BAR
+ * @pci: DWC PCI device
+ * @bar: BAR number of the endpoint
+ */
 void dw_pcie_ep_reset_bar(struct dw_pcie *pci, enum pci_barno bar)
 {
 	u8 func_no, funcs;
@@ -431,6 +449,13 @@  static const struct pci_epc_ops epc_ops = {
 	.get_features		= dw_pcie_ep_get_features,
 };
 
+/**
+ * dw_pcie_ep_raise_intx_irq - Raise INTx IRQ to the host
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint
+ *
+ * Return: 0 if success, errono otherwise.
+ */
 int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -442,6 +467,14 @@  int dw_pcie_ep_raise_intx_irq(struct dw_pcie_ep *ep, u8 func_no)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_intx_irq);
 
+/**
+ * dw_pcie_ep_raise_msi_irq - Raise MSI IRQ to the host
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint
+ * @interrupt_num: Interrupt number to be raised
+ *
+ * Return: 0 if success, errono otherwise.
+ */
 int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 			     u8 interrupt_num)
 {
@@ -490,6 +523,15 @@  int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_raise_msi_irq);
 
+/**
+ * dw_pcie_ep_raise_msix_irq_doorbell - Raise MSIX to the host using Doorbell
+ *					method
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint device
+ * @interrupt_num: Interrupt number to be raised
+ *
+ * Return: 0 if success, errno otherwise.
+ */
 int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8 func_no,
 				       u16 interrupt_num)
 {
@@ -509,6 +551,14 @@  int dw_pcie_ep_raise_msix_irq_doorbell(struct dw_pcie_ep *ep, u8 func_no,
 	return 0;
 }
 
+/**
+ * dw_pcie_ep_raise_msix_irq - Raise MSIX to the host
+ * @ep: DWC EP device
+ * @func_no: Function number of the endpoint device
+ * @interrupt_num: Interrupt number to be raised
+ *
+ * Return: 0 if success, errno otherwise.
+ */
 int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 			      u16 interrupt_num)
 {
@@ -556,6 +606,14 @@  int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 	return 0;
 }
 
+/**
+ * dw_pcie_ep_cleanup - Cleanup DWC EP resources after fundamental reset
+ * @ep: DWC EP device
+ *
+ * Cleans up the DWC EP specific resources like eDMA etc... after fundamental
+ * reset like PERST#. Note that this API is only applicable for drivers
+ * supporting PERST# or any other methods of fundamental reset.
+ */
 void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -564,6 +622,13 @@  void dw_pcie_ep_cleanup(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_cleanup);
 
+/**
+ * dw_pcie_ep_deinit - Deinitialize the endpoint device
+ * @ep: DWC EP device
+ *
+ * Deinitialize the endpoint device. EPC device is not destroyed since that will
+ * taken care by Devres.
+ */
 void dw_pcie_ep_deinit(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -635,6 +700,14 @@  static void dw_pcie_ep_init_non_sticky_registers(struct dw_pcie *pci)
 	dw_pcie_dbi_ro_wr_dis(pci);
 }
 
+/**
+ * dw_pcie_ep_init_registers - Initialize DWC EP specific registers
+ * @ep: DWC EP device
+ *
+ * Initialize the registers (CSRs) specific to DWC EP. This API should be called
+ * only when the endpoint receives an active refclk (either from host or
+ * generated locally).
+ */
 int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -718,6 +791,10 @@  int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_init_registers);
 
+/**
+ * dw_pcie_ep_linkup - Notify EPF drivers about link up event
+ * @ep: DWC EP device
+ */
 void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 {
 	struct pci_epc *epc = ep->epc;
@@ -726,6 +803,14 @@  void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup);
 
+/**
+ * dw_pcie_ep_linkdown - Notify EPF drivers about link down event
+ * @ep: DWC EP device
+ *
+ * Non-sticky registers are also initialized before sending the notification to
+ * the EPF drivers. This is needed since the registers need to be initialized
+ * before the link comes back again.
+ */
 void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -743,6 +828,15 @@  void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep)
 }
 EXPORT_SYMBOL_GPL(dw_pcie_ep_linkdown);
 
+/**
+ * dw_pcie_ep_init - Initialize the endpoint device
+ * @ep: DWC EP device
+ *
+ * Initialize the endpoint device. Allocate resources and create the EPC
+ * device with the endpoint framework.
+ *
+ * Return: 0 if success, errno otherwise.
+ */
 int dw_pcie_ep_init(struct dw_pcie_ep *ep)
 {
 	int ret;