| Message ID | 20240308-asrc_8qxp-v6-2-e08f6d030e09@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: imx8qxp add asrc and sai | expand |
On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote: > fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms > have 1 interrupt. > > Increase max interrupt number to 2 and add restriction for platforms except > i.MX8QXP and i.MX8QM. > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > .../devicetree/bindings/sound/fsl,spdif.yaml | 21 ++++++++++++++++++++- > 1 file changed, 20 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > index 56f8c0c8afdea..a242f68f99f18 100644 > --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > @@ -31,7 +31,11 @@ properties: > maxItems: 1 > > interrupts: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > + items: > + - description: Combined or receive interrupt > + - description: Transmit interrupt Test your patches please because this will have warnings. Or, you can put in *exactly* what I provided because this is not it. If you continue to just toss crap at us at the rate you are, the DT maintainers will either just start ignoring your patches or require some trusted review by another NXP colleague first (offhand, not sure who that would be which is part of the problem). Rob
On Fri, Mar 08, 2024 at 12:11:03PM -0600, Rob Herring wrote: > On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote: > > fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms > > have 1 interrupt. > > > > Increase max interrupt number to 2 and add restriction for platforms except > > i.MX8QXP and i.MX8QM. > > > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > --- > > .../devicetree/bindings/sound/fsl,spdif.yaml | 21 ++++++++++++++++++++- > > 1 file changed, 20 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > index 56f8c0c8afdea..a242f68f99f18 100644 > > --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > @@ -31,7 +31,11 @@ properties: > > maxItems: 1 > > > > interrupts: > > - maxItems: 1 > > + minItems: 1 > > + maxItems: 2 > > + items: > > + - description: Combined or receive interrupt > > + - description: Transmit interrupt > > Test your patches please because this will have warnings. Or, you can > put in *exactly* what I provided because this is not it. > > If you continue to just toss crap at us at the rate you are, the DT > maintainers will either just start ignoring your patches or require some > trusted review by another NXP colleague first (offhand, not sure who > that would be which is part of the problem). Sorry, I run wrong command to check another dtb file. So have not catch this problem. Frank > > Rob
On Fri, Mar 08, 2024 at 02:01:29PM -0500, Frank Li wrote: > On Fri, Mar 08, 2024 at 12:11:03PM -0600, Rob Herring wrote: > > On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote: > > > fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms > > > have 1 interrupt. > > > > > > Increase max interrupt number to 2 and add restriction for platforms except > > > i.MX8QXP and i.MX8QM. > > > > > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > > --- > > > .../devicetree/bindings/sound/fsl,spdif.yaml | 21 ++++++++++++++++++++- > > > 1 file changed, 20 insertions(+), 1 deletion(-) > > > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > index 56f8c0c8afdea..a242f68f99f18 100644 > > > --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > @@ -31,7 +31,11 @@ properties: > > > maxItems: 1 > > > > > > interrupts: > > > - maxItems: 1 > > > + minItems: 1 > > > + maxItems: 2 > > > + items: > > > + - description: Combined or receive interrupt > > > + - description: Transmit interrupt > > > > Test your patches please because this will have warnings. Or, you can > > put in *exactly* what I provided because this is not it. > > > > If you continue to just toss crap at us at the rate you are, the DT > > maintainers will either just start ignoring your patches or require some > > trusted review by another NXP colleague first (offhand, not sure who > > that would be which is part of the problem). > > Sorry, I run wrong command to check another dtb file. So have not catch > this problem. Strange when I run second time, spdif warning disappeared. make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8dxl-evk.dtb DTC_CHK arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: /: fixedregulator@101: 'anyOf' conditional failed, one must be fixed: 'reg' is a required property 'ranges' is a required property from schema $id: http://devicetree.org/schemas/root-node.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@34000000: clock-cm40-ipg: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[132000000]], 'clock-output-names': ['cm40_ipg_clk'], 'phandle': [[15]]} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: intmux@37400000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: 'clocks' is a required property from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: 'clocks' is a required property from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a070000: Unevaluated properties are not allowed ('resets' was unexpected) from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: 'clocks' is a required property from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: 'clocks' is a required property from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@5b000000: clock-conn-bch: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[400000000]], 'clock-output-names': ['conn_bch_clk']} should not be valid under {'type': 'object'} from schema $id: http://devicetree.org/schemas/simple-bus.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: $nodename:0: 'dma-apbh@5b810000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: 'clock-names', 'interrupt-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# > > Frank > > > > > Rob
On Fri, Mar 08, 2024 at 02:11:34PM -0500, Frank Li wrote: > On Fri, Mar 08, 2024 at 02:01:29PM -0500, Frank Li wrote: > > On Fri, Mar 08, 2024 at 12:11:03PM -0600, Rob Herring wrote: > > > On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote: > > > > fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms > > > > have 1 interrupt. > > > > > > > > Increase max interrupt number to 2 and add restriction for platforms except > > > > i.MX8QXP and i.MX8QM. > > > > > > > > Acked-by: Conor Dooley <conor.dooley@microchip.com> > > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > > > --- > > > > .../devicetree/bindings/sound/fsl,spdif.yaml | 21 ++++++++++++++++++++- > > > > 1 file changed, 20 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > > index 56f8c0c8afdea..a242f68f99f18 100644 > > > > --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > > +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml > > > > @@ -31,7 +31,11 @@ properties: > > > > maxItems: 1 > > > > > > > > interrupts: > > > > - maxItems: 1 > > > > + minItems: 1 > > > > + maxItems: 2 > > > > + items: > > > > + - description: Combined or receive interrupt > > > > + - description: Transmit interrupt > > > > > > Test your patches please because this will have warnings. Or, you can > > > put in *exactly* what I provided because this is not it. > > > > > > If you continue to just toss crap at us at the rate you are, the DT > > > maintainers will either just start ignoring your patches or require some > > > trusted review by another NXP colleague first (offhand, not sure who > > > that would be which is part of the problem). > > > > Sorry, I run wrong command to check another dtb file. So have not catch > > this problem. > > Strange when I run second time, spdif warning disappeared. > > make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8dxl-evk.dtb > DTC_CHK arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: /: fixedregulator@101: 'anyOf' conditional failed, one must be fixed: > 'reg' is a required property > 'ranges' is a required property > from schema $id: http://devicetree.org/schemas/root-node.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@34000000: clock-cm40-ipg: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[132000000]], 'clock-output-names': ['cm40_ipg_clk'], 'phandle': [[15]]} should not be valid under {'type': 'object'} > from schema $id: http://devicetree.org/schemas/simple-bus.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: intmux@37400000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a070000: Unevaluated properties are not allowed ('resets' was unexpected) > from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: 'clocks' is a required property > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) > from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@5b000000: clock-conn-bch: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[400000000]], 'clock-output-names': ['conn_bch_clk']} should not be valid under {'type': 'object'} > from schema $id: http://devicetree.org/schemas/simple-bus.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: $nodename:0: 'dma-apbh@5b810000' does not match '^dma-controller(@.*)?$' > from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# > /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: 'clock-names', 'interrupt-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# > I figured out what's happen. CHECK_DTB will check binding doc except example part. So I skip run dt_binding_check when I have not touch example part in dt-binding doc. The problem is step 1. run make CHECK_DTB=y freescale/imx8ulp-evk.dtb Then I get some sai error, I found use wrong 8ulp-evk.dtb step 2. run make CHECK_DTBS=y freescale/imx8dxl-evk.dtb Then tools not check dt_binding file again even there are warning. Do you have option let CHECK_DTBS to force check binding doc every time. Frank > > > > > > Frank > > > > > > > > Rob
On 08/03/2024 19:11, Rob Herring wrote: >> >> interrupts: >> - maxItems: 1 >> + minItems: 1 >> + maxItems: 2 >> + items: >> + - description: Combined or receive interrupt >> + - description: Transmit interrupt > > Test your patches please because this will have warnings. Or, you can > put in *exactly* what I provided because this is not it. > > If you continue to just toss crap at us at the rate you are, the DT > maintainers will either just start ignoring your patches or require some It happened already, at least for me, by default I move them to the end of the patch/review queue. > trusted review by another NXP colleague first (offhand, not sure who > that would be which is part of the problem). Best regards, Krzysztof
On 08/03/2024 20:26, Frank Li wrote: > On Fri, Mar 08, 2024 at 02:11:34PM -0500, Frank Li wrote: >> On Fri, Mar 08, 2024 at 02:01:29PM -0500, Frank Li wrote: >>> On Fri, Mar 08, 2024 at 12:11:03PM -0600, Rob Herring wrote: >>>> On Fri, Mar 08, 2024 at 10:30:51AM -0500, Frank Li wrote: >>>>> fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms >>>>> have 1 interrupt. >>>>> >>>>> Increase max interrupt number to 2 and add restriction for platforms except >>>>> i.MX8QXP and i.MX8QM. >>>>> >>>>> Acked-by: Conor Dooley <conor.dooley@microchip.com> >>>>> Signed-off-by: Frank Li <Frank.Li@nxp.com> >>>>> --- >>>>> .../devicetree/bindings/sound/fsl,spdif.yaml | 21 ++++++++++++++++++++- >>>>> 1 file changed, 20 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml >>>>> index 56f8c0c8afdea..a242f68f99f18 100644 >>>>> --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml >>>>> +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml >>>>> @@ -31,7 +31,11 @@ properties: >>>>> maxItems: 1 >>>>> >>>>> interrupts: >>>>> - maxItems: 1 >>>>> + minItems: 1 >>>>> + maxItems: 2 >>>>> + items: >>>>> + - description: Combined or receive interrupt >>>>> + - description: Transmit interrupt >>>> >>>> Test your patches please because this will have warnings. Or, you can >>>> put in *exactly* what I provided because this is not it. >>>> >>>> If you continue to just toss crap at us at the rate you are, the DT >>>> maintainers will either just start ignoring your patches or require some >>>> trusted review by another NXP colleague first (offhand, not sure who >>>> that would be which is part of the problem). >>> >>> Sorry, I run wrong command to check another dtb file. So have not catch >>> this problem. >> >> Strange when I run second time, spdif warning disappeared. >> >> make ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- -j8 CHECK_DTBS=y freescale/imx8dxl-evk.dtb >> DTC_CHK arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: /: fixedregulator@101: 'anyOf' conditional failed, one must be fixed: >> 'reg' is a required property >> 'ranges' is a required property >> from schema $id: http://devicetree.org/schemas/root-node.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@34000000: clock-cm40-ipg: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[132000000]], 'clock-output-names': ['cm40_ipg_clk'], 'phandle': [[15]]} should not be valid under {'type': 'object'} >> from schema $id: http://devicetree.org/schemas/simple-bus.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: intmux@37400000: 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' >> from schema $id: http://devicetree.org/schemas/interrupt-controller/fsl,intmux.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: 'clocks' is a required property >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@591f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: 'clocks' is a required property >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@599f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: serial@5a070000: Unevaluated properties are not allowed ('resets' was unexpected) >> from schema $id: http://devicetree.org/schemas/serial/fsl-lpuart.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: 'clocks' is a required property >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a1f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: 'clocks' is a required property >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-controller@5a9f0000: Unevaluated properties are not allowed ('power-domains' was unexpected) >> from schema $id: http://devicetree.org/schemas/dma/fsl,edma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: bus@5b000000: clock-conn-bch: {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[400000000]], 'clock-output-names': ['conn_bch_clk']} should not be valid under {'type': 'object'} >> from schema $id: http://devicetree.org/schemas/simple-bus.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: $nodename:0: 'dma-apbh@5b810000' does not match '^dma-controller(@.*)?$' >> from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# >> /home/lizhi/source/linux-upstream-dts/arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: dma-apbh@5b810000: 'clock-names', 'interrupt-names', 'power-domains' do not match any of the regexes: 'pinctrl-[0-9]+' >> from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# >> > > I figured out what's happen. CHECK_DTB will check binding doc except > example part. So I skip run dt_binding_check when I have not touch example > part in dt-binding doc. > > The problem is > step 1. run make CHECK_DTB=y freescale/imx8ulp-evk.dtb > Then I get some sai error, I found use wrong 8ulp-evk.dtb > > step 2. run make CHECK_DTBS=y freescale/imx8dxl-evk.dtb > Then tools not check dt_binding file again even there are warning. > > Do you have option let CHECK_DTBS to force check binding doc every time. CHECK_DTB is for checking dtbs, not binding. You must run dt_bindings_check, as asked by every damn document and guide. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml index 56f8c0c8afdea..a242f68f99f18 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.yaml +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.yaml @@ -31,7 +31,11 @@ properties: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 2 + items: + - description: Combined or receive interrupt + - description: Transmit interrupt dmas: items: @@ -101,6 +105,21 @@ required: additionalProperties: false allOf: + - if: + properties: + compatible: + enum: + - fsl,imx8qm-spdif + - fsl,imx8qxp-spdif + then: + properties: + interrupts: + minItems: 2 + else: + properties: + interrupts: + maxItems: 1 + - if: properties: compatible: