diff mbox series

[3/3] arm64: dts: rockchip: add regulators for PCIe on RK3399 Puma Haikou

Message ID 20240308-puma-diode-pu-v1-3-2b38457bcdc0@theobroma-systems.com (mailing list archive)
State New, archived
Headers show
Series rockchip: small DTS fixes for RK3399 Puma | expand

Commit Message

Quentin Schulz March 8, 2024, 12:52 p.m. UTC
From: Quentin Schulz <quentin.schulz@theobroma-systems.com>

The PCIe PHY requires two regulators and are present on the SoM
directly, while the PCIe connector also exposes 3V3 and 12V power rails
which are available on the baseboard.

Considering that 3/4 regulators are always-on on HW level and that the
last one depends on a regulator from the PMIC that is specified as
always on, this commit should be purely cosmetic and no change in
behavior is expected.

Let's add all regulators for PCIe on RK3399 Puma Haikou.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
---
 .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts |  2 ++
 arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi      | 26 ++++++++++++++++++++++
 2 files changed, 28 insertions(+)

Comments

Dragan Simic March 8, 2024, 3:30 p.m. UTC | #1
On 2024-03-08 13:52, Quentin Schulz wrote:
> From: Quentin Schulz <quentin.schulz@theobroma-systems.com>
> 
> The PCIe PHY requires two regulators and are present on the SoM
> directly, while the PCIe connector also exposes 3V3 and 12V power rails
> which are available on the baseboard.
> 
> Considering that 3/4 regulators are always-on on HW level and that the
> last one depends on a regulator from the PMIC that is specified as
> always on, this commit should be purely cosmetic and no change in
> behavior is expected.
> 
> Let's add all regulators for PCIe on RK3399 Puma Haikou.
> 
> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>

Looking good to me, assuming that the regulator naming follows the
labels used in the schematics.

Reviewed-by: Dragan Simic <dsimic@manjaro.org>

> ---
>  .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts |  2 ++
>  arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi      | 26 
> ++++++++++++++++++++++
>  2 files changed, 28 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
> b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
> index 18a98c4648eae..66ebb148bbc9a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
> @@ -194,6 +194,8 @@ &pcie0 {
>  	num-lanes = <4>;
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pcie_clkreqn_cpm>;
> +	vpcie3v3-supply = <&vcc3v3_baseboard>;
> +	vpcie12v-supply = <&dc_12v>;
>  	status = "okay";
>  };
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> index 2484ad2bd86fc..1113f57b09313 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> @@ -79,6 +79,26 @@ vcc5v0_sys: vcc5v0-sys {
>  		regulator-max-microvolt = <5000000>;
>  	};
> 
> +	vcca0v9: vcca0v9-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcca0v9";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <900000>;
> +		regulator-max-microvolt = <900000>;
> +		vin-supply = <&vcc_1v8>;
> +	};
> +
> +	vcca1v8: vcca1v8-regulator {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vcca1v8";
> +		regulator-always-on;
> +		regulator-boot-on;
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		vin-supply = <&vcc3v3_sys>;
> +	};
> +
>  	vdd_log: vdd-log {
>  		compatible = "pwm-regulator";
>  		pwms = <&pwm2 0 25000 1>;
> @@ -416,6 +436,12 @@ &io_domains {
>  	gpio1830-supply = <&vcc_1v8>;
>  };
> 
> +&pcie0 {
> +	/* PCIe PHY supplies */
> +	vpcie0v9-supply = <&vcca0v9>;
> +	vpcie1v8-supply = <&vcca1v8>;
> +};
> +
>  &pcie_clkreqn_cpm {
>  	rockchip,pins =
>  		<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
index 18a98c4648eae..66ebb148bbc9a 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
@@ -194,6 +194,8 @@  &pcie0 {
 	num-lanes = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	vpcie3v3-supply = <&vcc3v3_baseboard>;
+	vpcie12v-supply = <&dc_12v>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
index 2484ad2bd86fc..1113f57b09313 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
@@ -79,6 +79,26 @@  vcc5v0_sys: vcc5v0-sys {
 		regulator-max-microvolt = <5000000>;
 	};
 
+	vcca0v9: vcca0v9-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc_1v8>;
+	};
+
+	vcca1v8: vcca1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcca1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
 	vdd_log: vdd-log {
 		compatible = "pwm-regulator";
 		pwms = <&pwm2 0 25000 1>;
@@ -416,6 +436,12 @@  &io_domains {
 	gpio1830-supply = <&vcc_1v8>;
 };
 
+&pcie0 {
+	/* PCIe PHY supplies */
+	vpcie0v9-supply = <&vcca0v9>;
+	vpcie1v8-supply = <&vcca1v8>;
+};
+
 &pcie_clkreqn_cpm {
 	rockchip,pins =
 		<2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;