diff mbox series

[v5,2/4] dt-bindings: firmware: arm,scmi: support pinctrl protocol

Message ID 20240314-pinctrl-scmi-v5-2-b19576e557f2@nxp.com (mailing list archive)
State New, archived
Headers show
Series firmware: arm_scmi: Add SCMI v3.2 pincontrol protocol basic support | expand

Commit Message

Peng Fan (OSS) March 14, 2024, 1:35 p.m. UTC
From: Peng Fan <peng.fan@nxp.com>

Add SCMI v3.2 pinctrl protocol bindings and example.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 .../devicetree/bindings/firmware/arm,scmi.yaml     | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)

Comments

Dan Carpenter March 14, 2024, 3:32 p.m. UTC | #1
On Thu, Mar 14, 2024 at 09:35:19PM +0800, Peng Fan (OSS) wrote:
> +  protocol@19:
> +    type: object
> +    allOf:
> +      - $ref: '#/$defs/protocol-node'
> +      - $ref: /schemas/pinctrl/pinctrl.yaml
> +
> +    unevaluatedProperties: false
> +
> +    properties:
> +      reg:
> +        const: 0x19
> +
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +        allOf:
> +          - $ref: /schemas/pinctrl/pincfg-node.yaml#
> +          - $ref: /schemas/pinctrl/pinmux-node.yaml#
> +        unevaluatedProperties: false
> +
> +        description:
> +          A pin multiplexing sub-node describe how to configure a

describe[s]

> +          set of pins is some desired function.

s/is/in/

> +          A single sub-node may define several pin configurations.
> +          This sub-node is using default pinctrl bindings to configure
> +          pin multiplexing and using SCMI protocol to apply specified
> +          configuration using SCMI protocol.


This sub-node is using [the] default pinctrl bindings to configure
pin multiplexing and using SCMI protocol to apply [a] specified
configuration.

(Delete the duplicate "using SCMI protocol").

regards,
dan carpenter
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
index 4591523b51a0..bba4a37de6b4 100644
--- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
+++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml
@@ -247,6 +247,37 @@  properties:
       reg:
         const: 0x18
 
+  protocol@19:
+    type: object
+    allOf:
+      - $ref: '#/$defs/protocol-node'
+      - $ref: /schemas/pinctrl/pinctrl.yaml
+
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        const: 0x19
+
+    patternProperties:
+      '-pins$':
+        type: object
+        allOf:
+          - $ref: /schemas/pinctrl/pincfg-node.yaml#
+          - $ref: /schemas/pinctrl/pinmux-node.yaml#
+        unevaluatedProperties: false
+
+        description:
+          A pin multiplexing sub-node describe how to configure a
+          set of pins is some desired function.
+          A single sub-node may define several pin configurations.
+          This sub-node is using default pinctrl bindings to configure
+          pin multiplexing and using SCMI protocol to apply specified
+          configuration using SCMI protocol.
+
+    required:
+      - reg
+
 additionalProperties: false
 
 $defs:
@@ -401,6 +432,25 @@  examples:
             scmi_powercap: protocol@18 {
                 reg = <0x18>;
             };
+
+            scmi_pinctrl: protocol@19 {
+                reg = <0x19>;
+
+                i2c2-pins {
+                    groups = "g_i2c2_a", "g_i2c2_b";
+                    function = "f_i2c2";
+                };
+
+                mdio-pins {
+                    groups = "g_avb_mdio";
+                    drive-strength = <24>;
+                };
+
+                keys_pins: keys-pins {
+                    pins = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+                    bias-pull-up;
+                };
+            };
         };
     };