| Message ID | 20240314065744.1182701-1-peteryin.openbmc@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v1] drivers: watchdog: ast2600 support bootstatus | expand |
On 3/13/24 23:57, Peter Yin wrote: > Add WDIOF_EXTERN1 bootstatus in ast2600 > This does a bit more than that because it replaces WDIOF_CARDRESET with WDIOF_EXTERN1 for ast2600. > Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> > --- > Change log: > > v1 > - Patch 0001 - Add WDIOF_EXTERN1 bootstatus > --- > drivers/watchdog/aspeed_wdt.c | 14 ++++++++++++-- > 1 file changed, 12 insertions(+), 2 deletions(-) > > diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c > index b4773a6aaf8c..8adadd394be6 100644 > --- a/drivers/watchdog/aspeed_wdt.c > +++ b/drivers/watchdog/aspeed_wdt.c > @@ -81,6 +81,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); > #define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION BIT(0) > #define WDT_RESET_MASK1 0x1c > #define WDT_RESET_MASK2 0x20 > +#define WDT_EVENT_COUNTER_MASK (0xFFF << 8) > > /* > * WDT_RESET_WIDTH controls the characteristics of the external pulse (if > @@ -459,8 +460,17 @@ static int aspeed_wdt_probe(struct platform_device *pdev) > } > > status = readl(wdt->base + WDT_TIMEOUT_STATUS);/BOOT_SECON > - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) { > - wdt->wdd.bootstatus = WDIOF_CARDRESET; > + > + if (of_device_is_compatible(np, "aspeed,ast2600-wdt")) { > + if (status & WDT_EVENT_COUNTER_MASK) { > + /* > + * Reset cause by WatchDog > + */ > + wdt->wdd.bootstatus |= WDIOF_EXTERN1; > + } > + } else { > + if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) > + wdt->wdd.bootstatus = WDIOF_CARDRESET; > > if (of_device_is_compatible(np, "aspeed,ast2400-wdt") || > of_device_is_compatible(np, "aspeed,ast2500-wdt")) This check is now unnecessary since it matches the else case. Either case, it needs to be explained why WDIOF_CARDRESET ("Card previously reset the CPU") is replaced by WDIOF_EXTERN1 ("External relay 1") for ast2600, and why WDT_TIMEOUT_STATUS_BOOT_SECONDARY does not apply for ast2600 but (status & WDT_EVENT_COUNTER_MASK) does. Guenter
diff --git a/drivers/watchdog/aspeed_wdt.c b/drivers/watchdog/aspeed_wdt.c index b4773a6aaf8c..8adadd394be6 100644 --- a/drivers/watchdog/aspeed_wdt.c +++ b/drivers/watchdog/aspeed_wdt.c @@ -81,6 +81,7 @@ MODULE_DEVICE_TABLE(of, aspeed_wdt_of_table); #define WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION BIT(0) #define WDT_RESET_MASK1 0x1c #define WDT_RESET_MASK2 0x20 +#define WDT_EVENT_COUNTER_MASK (0xFFF << 8) /* * WDT_RESET_WIDTH controls the characteristics of the external pulse (if @@ -459,8 +460,17 @@ static int aspeed_wdt_probe(struct platform_device *pdev) } status = readl(wdt->base + WDT_TIMEOUT_STATUS); - if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) { - wdt->wdd.bootstatus = WDIOF_CARDRESET; + + if (of_device_is_compatible(np, "aspeed,ast2600-wdt")) { + if (status & WDT_EVENT_COUNTER_MASK) { + /* + * Reset cause by WatchDog + */ + wdt->wdd.bootstatus |= WDIOF_EXTERN1; + } + } else { + if (status & WDT_TIMEOUT_STATUS_BOOT_SECONDARY) + wdt->wdd.bootstatus = WDIOF_CARDRESET; if (of_device_is_compatible(np, "aspeed,ast2400-wdt") || of_device_is_compatible(np, "aspeed,ast2500-wdt"))
Add WDIOF_EXTERN1 bootstatus in ast2600 Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com> --- Change log: v1 - Patch 0001 - Add WDIOF_EXTERN1 bootstatus --- drivers/watchdog/aspeed_wdt.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)