diff mbox series

[v2,5/5] arm64: dts: freescale: imx8mp-sb-ucm: Add DSI panel overlay

Message ID 20240317164850.32708-6-laurent.pinchart@ideasonboard.com (mailing list archive)
State New, archived
Headers show
Series Add DT bindings and device tree for Compulab SB-UCM-iMX8MPLUS | expand

Commit Message

Laurent Pinchart March 17, 2024, 4:48 p.m. UTC
The SB-UCM-iMX8MPLUS kit is shipped with an external DSI panel. Add a
corresponding DT overlay.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
 arch/arm64/boot/dts/freescale/Makefile        |  4 +
 .../imx8mp-sb-ucm-panel-kd050hdfia020.dtso    | 81 +++++++++++++++++++
 2 files changed, 85 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso

Comments

Laurent Pinchart March 17, 2024, 4:56 p.m. UTC | #1
On Sun, Mar 17, 2024 at 06:48:50PM +0200, Laurent Pinchart wrote:
> The SB-UCM-iMX8MPLUS kit is shipped with an external DSI panel. Add a
> corresponding DT overlay.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
>  arch/arm64/boot/dts/freescale/Makefile        |  4 +
>  .../imx8mp-sb-ucm-panel-kd050hdfia020.dtso    | 81 +++++++++++++++++++
>  2 files changed, 85 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
> 
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 02efa97fc464..d7432ce6a7bb 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -165,6 +165,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm.dtb
> +
> +imx8mp-sb-ucm-panel-kd050hdfia020-dtbs := imx8mp-sb-ucm.dtb imx8mp-sb-ucm-panel-kd050hdfia020-dtbo
> +dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm-panel-kd050hdfia020-dtb

On a side note, is there a way to selectively compile this dtb ? Running

$ make dtbs

will compile them all, but

$ make freescale/imx8mp-sb-ucm-panel-kd050hdfia020-dtb

complains with

make[4]: *** No rule to make target 'arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtb'.  Stop.
make[3]: *** [/home/laurent/src/iob/toradex/linux/scripts/Makefile.build:481: arch/arm64/boot/dts/freescale] Error 2
make[2]: *** [/home/laurent/src/iob/toradex/linux/Makefile:1389: freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtb] Error 2

I would like to compile it selectively, as running

$ make dtbs CHECK_DTBS=1

makes it much more time consuming to run the dtb checks.

> +
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
> new file mode 100644
> index 000000000000..fdad943c1554
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright 2021 CompuLab
> + *
> + * Device tree overlay for KD050HDFIA020-C020A panel connector to Compulab
> + * SB-UCM-iMX8PLUS.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +&dsi_backlight {
> +	status = "okay";
> +};
> +
> +&i2c5 {
> +	status = "okay";
> +
> +	touch@5d {
> +		compatible = "goodix,gt911";
> +		reg = <0x5d>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_dsi_touch>;
> +
> +		interrupt-parent = <&gpio4>;
> +		interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
> +
> +                irq-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
> +		reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
> +        };
> +};
> +
> +&lcdif1 {
> +	status = "okay";
> +};
> +
> +&mipi_dsi {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	samsung,esc-clock-frequency = <20000000>;
> +	status = "okay";
> +
> +	panel@0 {
> +		compatible = "startek,kd050hdfia020", "ilitek,ili9881c";
> +		reg = <0>;
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_dsi_panel>;
> +
> +		reset-gpio = <&pca9555 4 GPIO_ACTIVE_LOW>;
> +		power-supply = <&reg_3v3_per>;
> +
> +		backlight = <&dsi_backlight>;
> +
> +		port {
> +			panel_in: endpoint {
> +				remote-endpoint = <&mipi_dsi_out>;
> +				data-lanes = <1 2 3 4>;
> +			};
> +		};
> +	};
> +
> +	ports {
> +		port@1 {
> +			reg = <1>;
> +
> +			mipi_dsi_out: endpoint {
> +				remote-endpoint = <&panel_in>;
> +				data-lanes = <1 2 3 4>;
> +				lane-polarities = <0 0 0 0 0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm1 {
> +	status = "okay";
> +};
Laurent Pinchart March 18, 2024, 12:05 a.m. UTC | #2
On Sun, Mar 17, 2024 at 06:56:47PM +0200, Laurent Pinchart wrote:
> On Sun, Mar 17, 2024 at 06:48:50PM +0200, Laurent Pinchart wrote:
> > The SB-UCM-iMX8MPLUS kit is shipped with an external DSI panel. Add a
> > corresponding DT overlay.
> > 
> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > ---
> >  arch/arm64/boot/dts/freescale/Makefile        |  4 +
> >  .../imx8mp-sb-ucm-panel-kd050hdfia020.dtso    | 81 +++++++++++++++++++
> >  2 files changed, 85 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> > index 02efa97fc464..d7432ce6a7bb 100644
> > --- a/arch/arm64/boot/dts/freescale/Makefile
> > +++ b/arch/arm64/boot/dts/freescale/Makefile
> > @@ -165,6 +165,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm.dtb
> > +
> > +imx8mp-sb-ucm-panel-kd050hdfia020-dtbs := imx8mp-sb-ucm.dtb imx8mp-sb-ucm-panel-kd050hdfia020-dtbo
> > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm-panel-kd050hdfia020-dtb

Replying to myself, fixing the typo here with s/-dtb$/.dtb/ helps :-)
I'll send a v3 after waiting some time for review comments.

> On a side note, is there a way to selectively compile this dtb ? Running
> 
> $ make dtbs
> 
> will compile them all, but
> 
> $ make freescale/imx8mp-sb-ucm-panel-kd050hdfia020-dtb
> 
> complains with
> 
> make[4]: *** No rule to make target 'arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtb'.  Stop.
> make[3]: *** [/home/laurent/src/iob/toradex/linux/scripts/Makefile.build:481: arch/arm64/boot/dts/freescale] Error 2
> make[2]: *** [/home/laurent/src/iob/toradex/linux/Makefile:1389: freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtb] Error 2
> 
> I would like to compile it selectively, as running
> 
> $ make dtbs CHECK_DTBS=1
> 
> makes it much more time consuming to run the dtb checks.
> 
> > +
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
> >  dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
> > new file mode 100644
> > index 000000000000..fdad943c1554
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
> > @@ -0,0 +1,81 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright 2021 CompuLab
> > + *
> > + * Device tree overlay for KD050HDFIA020-C020A panel connector to Compulab
> > + * SB-UCM-iMX8PLUS.
> > + */
> > +
> > +/dts-v1/;
> > +/plugin/;
> > +
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +
> > +&dsi_backlight {
> > +	status = "okay";
> > +};
> > +
> > +&i2c5 {
> > +	status = "okay";
> > +
> > +	touch@5d {
> > +		compatible = "goodix,gt911";
> > +		reg = <0x5d>;
> > +
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_dsi_touch>;
> > +
> > +		interrupt-parent = <&gpio4>;
> > +		interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +                irq-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
> > +		reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
> > +        };
> > +};
> > +
> > +&lcdif1 {
> > +	status = "okay";
> > +};
> > +
> > +&mipi_dsi {
> > +	#address-cells = <1>;
> > +	#size-cells = <0>;
> > +	samsung,esc-clock-frequency = <20000000>;
> > +	status = "okay";
> > +
> > +	panel@0 {
> > +		compatible = "startek,kd050hdfia020", "ilitek,ili9881c";
> > +		reg = <0>;
> > +		pinctrl-names = "default";
> > +		pinctrl-0 = <&pinctrl_dsi_panel>;
> > +
> > +		reset-gpio = <&pca9555 4 GPIO_ACTIVE_LOW>;
> > +		power-supply = <&reg_3v3_per>;
> > +
> > +		backlight = <&dsi_backlight>;
> > +
> > +		port {
> > +			panel_in: endpoint {
> > +				remote-endpoint = <&mipi_dsi_out>;
> > +				data-lanes = <1 2 3 4>;
> > +			};
> > +		};
> > +	};
> > +
> > +	ports {
> > +		port@1 {
> > +			reg = <1>;
> > +
> > +			mipi_dsi_out: endpoint {
> > +				remote-endpoint = <&panel_in>;
> > +				data-lanes = <1 2 3 4>;
> > +				lane-polarities = <0 0 0 0 0>;
> > +			};
> > +		};
> > +	};
> > +};
> > +
> > +&pwm1 {
> > +	status = "okay";
> > +};
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 02efa97fc464..d7432ce6a7bb 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -165,6 +165,10 @@  dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-msc-sm2s-ep1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm.dtb
+
+imx8mp-sb-ucm-panel-kd050hdfia020-dtbs := imx8mp-sb-ucm.dtb imx8mp-sb-ucm-panel-kd050hdfia020-dtbo
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-sb-ucm-panel-kd050hdfia020-dtb
+
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-hdmi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-lt6.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-skov-revb-mi1010ait-1cp1.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
new file mode 100644
index 000000000000..fdad943c1554
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sb-ucm-panel-kd050hdfia020.dtso
@@ -0,0 +1,81 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 CompuLab
+ *
+ * Device tree overlay for KD050HDFIA020-C020A panel connector to Compulab
+ * SB-UCM-iMX8PLUS.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+&dsi_backlight {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+
+	touch@5d {
+		compatible = "goodix,gt911";
+		reg = <0x5d>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi_touch>;
+
+		interrupt-parent = <&gpio4>;
+		interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+
+                irq-gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&pca9555 5 GPIO_ACTIVE_HIGH>;
+        };
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	samsung,esc-clock-frequency = <20000000>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "startek,kd050hdfia020", "ilitek,ili9881c";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_dsi_panel>;
+
+		reset-gpio = <&pca9555 4 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3_per>;
+
+		backlight = <&dsi_backlight>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mipi_dsi_out>;
+				data-lanes = <1 2 3 4>;
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mipi_dsi_out: endpoint {
+				remote-endpoint = <&panel_in>;
+				data-lanes = <1 2 3 4>;
+				lane-polarities = <0 0 0 0 0>;
+			};
+		};
+	};
+};
+
+&pwm1 {
+	status = "okay";
+};