Message ID | 20240319-add-t95-axp313-support-v4-3-6204b6d23229@gmail.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add initial support for T95 TV boxes | expand |
On Tue, 19 Mar 2024 18:50:24 +0100 Kamil Kasperski <ressetkk@gmail.com> wrote: Hi Kamil, > Add dtsi file for T95 tv boxes and add initial support for T95 5G AXP313A > variant with a board name H616-T95MAX-AXP313A-v3.0 Internal storage is not > accessible due to lack of support for H616 NAND controller. > > Signed-off-by: Kamil Kasperski <ressetkk@gmail.com> thanks for the changes, looks good now, although a bit minimal ;-) Reviewed-by: Andre Przywara <andre.przywara@arm.com> Please can you wait till the -rc1 release on Sunday, and send a rebased version next week? There is a small merge conflict in the dts Makefile as of now. Cheers, Andre > --- > arch/arm64/boot/dts/allwinner/Makefile | 1 + > arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++ > .../dts/allwinner/sun50i-h616-t95max-axp313.dts | 84 ++++++++++++++++ > 3 files changed, 194 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > index 21149b346a60..294921f12b73 100644 > --- a/arch/arm64/boot/dts/allwinner/Makefile > +++ b/arch/arm64/boot/dts/allwinner/Makefile > @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-t95max-axp313.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi > new file mode 100644 > index 000000000000..4c02408733bc > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi > @@ -0,0 +1,109 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> > + * > + * Common DT nodes for H616-based T95 TV boxes > + * There are two versions reported with different PMIC variants. > + */ > + > +#include "sun50i-h616.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + aliases { > + ethernet1 = &sdio_wifi; > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + reg_vcc5v: vcc5v { > + /* board wide 5V supply directly from the DC input */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_vcc3v3: vcc3v3 { > + /* discrete 3.3V regulator */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + wifi_pwrseq: pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rtc CLK_OSC32K_FANOUT>; > + clock-names = "ext_clock"; > + pinctrl-0 = <&x32clk_fanout_pin>; > + pinctrl-names = "default"; > + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ > + }; > +}; > + > +&ehci0 { > + status = "okay"; > +}; > + > +&ehci2 { > + status = "okay"; > +}; > + > +&ir { > + status = "okay"; > +}; > + > +&mmc0 { > + cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc1 { > + mmc-pwrseq = <&wifi_pwrseq>; > + bus-width = <4>; > + non-removable; > + status = "okay"; > + > + sdio_wifi: wifi@1 { > + reg = <1>; > + }; > +}; > + > +&ohci0 { > + status = "okay"; > +}; > + > +&ohci2 { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_ph_pins>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&usbotg { > + dr_mode = "host"; /* USB A type receptable */ > + status = "okay"; > +}; > + > +&usbphy { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts > new file mode 100644 > index 000000000000..08a6b4fcc235 > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts > @@ -0,0 +1,84 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> > + * > + * Configuration for T95 TV box with board label H616-T95MAX-AXP313A-v3.0 > + */ > + > +/dts-v1/; > + > +#include "sun50i-h616-t95.dtsi" > + > +/ { > + model = "T95 5G (AXP313)"; > + compatible = "t95,t95max-axp313", "allwinner,sun50i-h616"; > +}; > + > +&mmc0 { > + vmmc-supply = <®_dldo1>; > +}; > + > +&mmc1 { > + vmmc-supply = <®_dldo1>; > + vqmmc-supply = <®_aldo1>; > +}; > + > +&r_i2c { > + status = "okay"; > + > + axp313: pmic@36 { > + compatible = "x-powers,axp313a"; > + reg = <0x36>; > + #interrupt-cells = <1>; > + interrupt-controller; > + > + vin1-supply = <®_vcc5v>; > + vin2-supply = <®_vcc5v>; > + vin3-supply = <®_vcc5v>; > + > + regulators { > + reg_aldo1: aldo1 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8"; > + }; > + > + reg_dldo1: dldo1 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3"; > + }; > + > + reg_dcdc1: dcdc1 { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <990000>; > + regulator-name = "vdd-gpu-sys"; > + }; > + > + reg_dcdc2: dcdc2 { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1100000>; > + regulator-name = "vdd-cpu"; > + }; > + > + reg_dcdc3: dcdc3 { > + regulator-always-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-name = "vdd-dram"; > + }; > + }; > + }; > +}; > + > +&pio { > + vcc-pc-supply = <®_aldo1>; > + vcc-pf-supply = <®_dldo1>; > + vcc-pg-supply = <®_aldo1>; > + vcc-ph-supply = <®_dldo1>; > + vcc-pi-supply = <®_dldo1>; > +}; >
W dniu 20.03.2024 o 00:22, Andre Przywara pisze: > On Tue, 19 Mar 2024 18:50:24 +0100 > Kamil Kasperski <ressetkk@gmail.com> wrote: > > Hi Kamil, > >> Add dtsi file for T95 tv boxes and add initial support for T95 5G AXP313A >> variant with a board name H616-T95MAX-AXP313A-v3.0 Internal storage is not >> accessible due to lack of support for H616 NAND controller. >> >> Signed-off-by: Kamil Kasperski <ressetkk@gmail.com> > thanks for the changes, looks good now, although a bit minimal ;-) > > Reviewed-by: Andre Przywara <andre.przywara@arm.com> > > Please can you wait till the -rc1 release on Sunday, and send a rebased > version next week? There is a small merge conflict in the dts Makefile > as of now. > > Cheers, > Andre Sure, no problem. Thank you very much for a review. Once it gets merged I'll get back to u-boot patch. Cheers, Kamil > >> --- >> arch/arm64/boot/dts/allwinner/Makefile | 1 + >> arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++ >> .../dts/allwinner/sun50i-h616-t95max-axp313.dts | 84 ++++++++++++++++ >> 3 files changed, 194 insertions(+) >> >> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile >> index 21149b346a60..294921f12b73 100644 >> --- a/arch/arm64/boot/dts/allwinner/Makefile >> +++ b/arch/arm64/boot/dts/allwinner/Makefile >> @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb >> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb >> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb >> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb >> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-t95max-axp313.dtb >> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb >> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb >> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi >> new file mode 100644 >> index 000000000000..4c02408733bc >> --- /dev/null >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi >> @@ -0,0 +1,109 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> >> + * >> + * Common DT nodes for H616-based T95 TV boxes >> + * There are two versions reported with different PMIC variants. >> + */ >> + >> +#include "sun50i-h616.dtsi" >> + >> +#include <dt-bindings/gpio/gpio.h> >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> + >> +/ { >> + aliases { >> + ethernet1 = &sdio_wifi; >> + serial0 = &uart0; >> + }; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + reg_vcc5v: vcc5v { >> + /* board wide 5V supply directly from the DC input */ >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc-5v"; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + regulator-always-on; >> + }; >> + >> + reg_vcc3v3: vcc3v3 { >> + /* discrete 3.3V regulator */ >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc-3v3"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-always-on; >> + }; >> + >> + wifi_pwrseq: pwrseq { >> + compatible = "mmc-pwrseq-simple"; >> + clocks = <&rtc CLK_OSC32K_FANOUT>; >> + clock-names = "ext_clock"; >> + pinctrl-0 = <&x32clk_fanout_pin>; >> + pinctrl-names = "default"; >> + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ >> + }; >> +}; >> + >> +&ehci0 { >> + status = "okay"; >> +}; >> + >> +&ehci2 { >> + status = "okay"; >> +}; >> + >> +&ir { >> + status = "okay"; >> +}; >> + >> +&mmc0 { >> + cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ >> + bus-width = <4>; >> + status = "okay"; >> +}; >> + >> +&mmc1 { >> + mmc-pwrseq = <&wifi_pwrseq>; >> + bus-width = <4>; >> + non-removable; >> + status = "okay"; >> + >> + sdio_wifi: wifi@1 { >> + reg = <1>; >> + }; >> +}; >> + >> +&ohci0 { >> + status = "okay"; >> +}; >> + >> +&ohci2 { >> + status = "okay"; >> +}; >> + >> +&uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_ph_pins>; >> + status = "okay"; >> +}; >> + >> +&uart1 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; >> + uart-has-rtscts; >> + status = "okay"; >> +}; >> + >> +&usbotg { >> + dr_mode = "host"; /* USB A type receptable */ >> + status = "okay"; >> +}; >> + >> +&usbphy { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts >> new file mode 100644 >> index 000000000000..08a6b4fcc235 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts >> @@ -0,0 +1,84 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> >> + * >> + * Configuration for T95 TV box with board label H616-T95MAX-AXP313A-v3.0 >> + */ >> + >> +/dts-v1/; >> + >> +#include "sun50i-h616-t95.dtsi" >> + >> +/ { >> + model = "T95 5G (AXP313)"; >> + compatible = "t95,t95max-axp313", "allwinner,sun50i-h616"; >> +}; >> + >> +&mmc0 { >> + vmmc-supply = <®_dldo1>; >> +}; >> + >> +&mmc1 { >> + vmmc-supply = <®_dldo1>; >> + vqmmc-supply = <®_aldo1>; >> +}; >> + >> +&r_i2c { >> + status = "okay"; >> + >> + axp313: pmic@36 { >> + compatible = "x-powers,axp313a"; >> + reg = <0x36>; >> + #interrupt-cells = <1>; >> + interrupt-controller; >> + >> + vin1-supply = <®_vcc5v>; >> + vin2-supply = <®_vcc5v>; >> + vin3-supply = <®_vcc5v>; >> + >> + regulators { >> + reg_aldo1: aldo1 { >> + regulator-always-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-name = "vcc1v8"; >> + }; >> + >> + reg_dldo1: dldo1 { >> + regulator-always-on; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + regulator-name = "vcc3v3"; >> + }; >> + >> + reg_dcdc1: dcdc1 { >> + regulator-always-on; >> + regulator-min-microvolt = <810000>; >> + regulator-max-microvolt = <990000>; >> + regulator-name = "vdd-gpu-sys"; >> + }; >> + >> + reg_dcdc2: dcdc2 { >> + regulator-always-on; >> + regulator-min-microvolt = <810000>; >> + regulator-max-microvolt = <1100000>; >> + regulator-name = "vdd-cpu"; >> + }; >> + >> + reg_dcdc3: dcdc3 { >> + regulator-always-on; >> + regulator-min-microvolt = <1500000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-name = "vdd-dram"; >> + }; >> + }; >> + }; >> +}; >> + >> +&pio { >> + vcc-pc-supply = <®_aldo1>; >> + vcc-pf-supply = <®_dldo1>; >> + vcc-pg-supply = <®_aldo1>; >> + vcc-ph-supply = <®_dldo1>; >> + vcc-pi-supply = <®_dldo1>; >> +}; >>
Hi Kamil, sorry for being a bit late. Dne torek, 19. marec 2024 ob 18:50:24 GMT +2 je Kamil Kasperski napisal(a): > Add dtsi file for T95 tv boxes and add initial support for T95 5G AXP313A > variant with a board name H616-T95MAX-AXP313A-v3.0 Internal storage is not > accessible due to lack of support for H616 NAND controller. > > Signed-off-by: Kamil Kasperski <ressetkk@gmail.com> > --- > arch/arm64/boot/dts/allwinner/Makefile | 1 + > arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++ > .../dts/allwinner/sun50i-h616-t95max-axp313.dts | 84 ++++++++++++++++ > 3 files changed, 194 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile > index 21149b346a60..294921f12b73 100644 > --- a/arch/arm64/boot/dts/allwinner/Makefile > +++ b/arch/arm64/boot/dts/allwinner/Makefile > @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb > +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-t95max-axp313.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb > dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi > new file mode 100644 > index 000000000000..4c02408733bc > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi > @@ -0,0 +1,109 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> > + * > + * Common DT nodes for H616-based T95 TV boxes > + * There are two versions reported with different PMIC variants. > + */ > + > +#include "sun50i-h616.dtsi" > + > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > + > +/ { > + aliases { > + ethernet1 = &sdio_wifi; > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + reg_vcc5v: vcc5v { > + /* board wide 5V supply directly from the DC input */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-5v"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_vcc3v3: vcc3v3 { > + /* discrete 3.3V regulator */ > + compatible = "regulator-fixed"; > + regulator-name = "vcc-3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + wifi_pwrseq: pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rtc CLK_OSC32K_FANOUT>; > + clock-names = "ext_clock"; > + pinctrl-0 = <&x32clk_fanout_pin>; > + pinctrl-names = "default"; > + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ > + }; > +}; > + > +&ehci0 { > + status = "okay"; > +}; > + > +&ehci2 { > + status = "okay"; > +}; > + > +&ir { > + status = "okay"; > +}; > + > +&mmc0 { > + cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc1 { > + mmc-pwrseq = <&wifi_pwrseq>; > + bus-width = <4>; > + non-removable; > + status = "okay"; > + > + sdio_wifi: wifi@1 { > + reg = <1>; > + }; > +}; > + > +&ohci0 { > + status = "okay"; > +}; > + > +&ohci2 { > + status = "okay"; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_ph_pins>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; > + uart-has-rtscts; > + status = "okay"; > +}; I suppose UART1 is used for bluetooth, right? As is, this currently doesn't help much. Is there any appropriate BT compatible? Best regards, Jernej > + > +&usbotg { > + dr_mode = "host"; /* USB A type receptable */ > + status = "okay"; > +}; > + > +&usbphy { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts > new file mode 100644 > index 000000000000..08a6b4fcc235 > --- /dev/null > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts > @@ -0,0 +1,84 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> > + * > + * Configuration for T95 TV box with board label H616-T95MAX-AXP313A-v3.0 > + */ > + > +/dts-v1/; > + > +#include "sun50i-h616-t95.dtsi" > + > +/ { > + model = "T95 5G (AXP313)"; > + compatible = "t95,t95max-axp313", "allwinner,sun50i-h616"; > +}; > + > +&mmc0 { > + vmmc-supply = <®_dldo1>; > +}; > + > +&mmc1 { > + vmmc-supply = <®_dldo1>; > + vqmmc-supply = <®_aldo1>; > +}; > + > +&r_i2c { > + status = "okay"; > + > + axp313: pmic@36 { > + compatible = "x-powers,axp313a"; > + reg = <0x36>; > + #interrupt-cells = <1>; > + interrupt-controller; > + > + vin1-supply = <®_vcc5v>; > + vin2-supply = <®_vcc5v>; > + vin3-supply = <®_vcc5v>; > + > + regulators { > + reg_aldo1: aldo1 { > + regulator-always-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc1v8"; > + }; > + > + reg_dldo1: dldo1 { > + regulator-always-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3"; > + }; > + > + reg_dcdc1: dcdc1 { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <990000>; > + regulator-name = "vdd-gpu-sys"; > + }; > + > + reg_dcdc2: dcdc2 { > + regulator-always-on; > + regulator-min-microvolt = <810000>; > + regulator-max-microvolt = <1100000>; > + regulator-name = "vdd-cpu"; > + }; > + > + reg_dcdc3: dcdc3 { > + regulator-always-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-name = "vdd-dram"; > + }; > + }; > + }; > +}; > + > +&pio { > + vcc-pc-supply = <®_aldo1>; > + vcc-pf-supply = <®_dldo1>; > + vcc-pg-supply = <®_aldo1>; > + vcc-ph-supply = <®_dldo1>; > + vcc-pi-supply = <®_dldo1>; > +}; > >
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 21149b346a60..294921f12b73 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -42,6 +42,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-t95max-axp313.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-longanpi-3h.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h618-orangepi-zero2w.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi new file mode 100644 index 000000000000..4c02408733bc --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> + * + * Common DT nodes for H616-based T95 TV boxes + * There are two versions reported with different PMIC variants. + */ + +#include "sun50i-h616.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + aliases { + ethernet1 = &sdio_wifi; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reg_vcc5v: vcc5v { + /* board wide 5V supply directly from the DC input */ + compatible = "regulator-fixed"; + regulator-name = "vcc-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + reg_vcc3v3: vcc3v3 { + /* discrete 3.3V regulator */ + compatible = "regulator-fixed"; + regulator-name = "vcc-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + wifi_pwrseq: pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rtc CLK_OSC32K_FANOUT>; + clock-names = "ext_clock"; + pinctrl-0 = <&x32clk_fanout_pin>; + pinctrl-names = "default"; + reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ + }; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + status = "okay"; +}; + +&mmc0 { + cd-gpios = <&pio 8 16 GPIO_ACTIVE_LOW>; /* PI16 */ + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + sdio_wifi: wifi@1 { + reg = <1>; + }; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_ph_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg { + dr_mode = "host"; /* USB A type receptable */ + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts new file mode 100644 index 000000000000..08a6b4fcc235 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-t95max-axp313.dts @@ -0,0 +1,84 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2024 Kamil Kasperski <ressetkk@gmail.com> + * + * Configuration for T95 TV box with board label H616-T95MAX-AXP313A-v3.0 + */ + +/dts-v1/; + +#include "sun50i-h616-t95.dtsi" + +/ { + model = "T95 5G (AXP313)"; + compatible = "t95,t95max-axp313", "allwinner,sun50i-h616"; +}; + +&mmc0 { + vmmc-supply = <®_dldo1>; +}; + +&mmc1 { + vmmc-supply = <®_dldo1>; + vqmmc-supply = <®_aldo1>; +}; + +&r_i2c { + status = "okay"; + + axp313: pmic@36 { + compatible = "x-powers,axp313a"; + reg = <0x36>; + #interrupt-cells = <1>; + interrupt-controller; + + vin1-supply = <®_vcc5v>; + vin2-supply = <®_vcc5v>; + vin3-supply = <®_vcc5v>; + + regulators { + reg_aldo1: aldo1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc1v8"; + }; + + reg_dldo1: dldo1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3"; + }; + + reg_dcdc1: dcdc1 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <990000>; + regulator-name = "vdd-gpu-sys"; + }; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <810000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vdd-dram"; + }; + }; + }; +}; + +&pio { + vcc-pc-supply = <®_aldo1>; + vcc-pf-supply = <®_dldo1>; + vcc-pg-supply = <®_aldo1>; + vcc-ph-supply = <®_dldo1>; + vcc-pi-supply = <®_dldo1>; +};
Add dtsi file for T95 tv boxes and add initial support for T95 5G AXP313A variant with a board name H616-T95MAX-AXP313A-v3.0 Internal storage is not accessible due to lack of support for H616 NAND controller. Signed-off-by: Kamil Kasperski <ressetkk@gmail.com> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + arch/arm64/boot/dts/allwinner/sun50i-h616-t95.dtsi | 109 +++++++++++++++++++++ .../dts/allwinner/sun50i-h616-t95max-axp313.dts | 84 ++++++++++++++++ 3 files changed, 194 insertions(+)