diff mbox series

[v10,07/11] ARM: dts: imx6: remove fsl,anatop property from usb controller node

Message ID 20240321081439.541799-7-xu.yang_2@nxp.com (mailing list archive)
State New, archived
Headers show
Series [v10,01/11] dt-bindings: usb: usbmisc-imx: add fsl,imx8ulp-usbmisc compatible | expand

Commit Message

Xu Yang March 21, 2024, 8:14 a.m. UTC
This property is not needed for usb controller. The usb phy needs it
instead.

Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
Changes in v7:
 - new patch
Changes in v8:
 - no changes
Changes in v9:
 - no changes
Changes in v10:
 - not remove fsl,anatop for imx6ul.dtsi since it's already removed
---
 arch/arm/boot/dts/nxp/imx/imx6sll.dtsi | 1 -
 arch/arm/boot/dts/nxp/imx/imx6sx.dtsi  | 2 --
 2 files changed, 3 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 3659fd5ecfa6..ddeb5b37fb78 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -683,7 +683,6 @@  usbotg1: usb@2184000 {
 				clocks = <&clks IMX6SLL_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index df3a375f0a3e..b8d95957ca09 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -929,7 +929,6 @@  usbotg1: usb@2184000 {
 				clocks = <&clks IMX6SX_CLK_USBOH3>;
 				fsl,usbphy = <&usbphy1>;
 				fsl,usbmisc = <&usbmisc 0>;
-				fsl,anatop = <&anatop>;
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;
 				rx-burst-size-dword = <0x10>;
@@ -957,7 +956,6 @@  usbh: usb@2184400 {
 				fsl,usbphy = <&usbphynop1>;
 				fsl,usbmisc = <&usbmisc 2>;
 				phy_type = "hsic";
-				fsl,anatop = <&anatop>;
 				dr_mode = "host";
 				ahb-burst-config = <0x0>;
 				tx-burst-size-dword = <0x10>;