@@ -50,7 +50,7 @@
/*
* 26 possible I2C status codes, but codes applicable only
- * to master are listed here and used in this driver
+ * to host mode are listed here and used in this driver
*/
enum {
M_BUS_ERROR = 0x00,
@@ -157,7 +157,7 @@ static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
break;
case MR_ADDR_R_ACK:
- /* Receive first byte from slave */
+ /* Receive first byte from client */
if (i2c->msg->len == 1) {
/* Last byte, return NACK */
writel(LPC24XX_AA, i2c->base + LPC24XX_I2CONCLR);
@@ -196,7 +196,7 @@ static void i2c_lpc2k_pump_msg(struct lpc2k_i2c *i2c)
}
/*
- * One pre-last data input, send NACK to tell the slave that
+ * One pre-last data input, send NACK to tell the client that
* this is going to be the last data byte to be transferred.
*/
if (i2c->msg_idx >= i2c->msg->len - 2) {
@@ -338,7 +338,7 @@ static u32 i2c_lpc2k_functionality(struct i2c_adapter *adap)
}
static const struct i2c_algorithm i2c_lpc2k_algorithm = {
- .master_xfer = i2c_lpc2k_xfer,
+ .xfer = i2c_lpc2k_xfer,
.functionality = i2c_lpc2k_functionality,
};
Match the wording of this driver wrt. the newest I2C v7, SMBus 3.2, I3C specifications and replace "master/slave" with more appropriate terms. They are also more specific because we distinguish now between a remote entity ("client") and a local one ("target"). Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- drivers/i2c/busses/i2c-lpc2k.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)