[v2,4/5] regulator: rk808: Support apply_bit for rk808_set_suspend_voltage_range

Commit Message

Alex Bee March 23, 2024, 8:58 a.m. UTC

rk808_set_suspend_voltage_range currently does not account the existence of
apply_bit/apply_reg.

This adds support for those in same way it is done in
regulator_set_voltage_sel_regmap and is required for the upcoming RK816
support

Signed-off-by: Alex Bee <[e-mail]>
---
changes since v1:
  - none

 drivers/regulator/rk808-regulator.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index d89ae7f16d7a..a6a563e402d0 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -534,15 +534,25 @@  static int rk808_set_suspend_voltage_range(struct regulator_dev *rdev, int uv)
 {
 	unsigned int reg;
 	int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
+	int ret;
 
 	if (sel < 0)
 		return -EINVAL;
 
 	reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
 
-	return regmap_update_bits(rdev->regmap, reg,
-				  rdev->desc->vsel_mask,
-				  sel);
+	ret = regmap_update_bits(rdev->regmap, reg,
+				 rdev->desc->vsel_mask,
+				 sel);
+	if (ret)
+		return ret;
+
+	if (rdev->desc->apply_bit)
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+					 rdev->desc->apply_bit,
+					 rdev->desc->apply_bit);
+
+	return ret;
 }
 
 static int rk805_set_suspend_enable(struct regulator_dev *rdev)