Message ID | 20240402151635.3803406-1-mwalle@kernel.org (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | arm64: dts: ti: k3-j722s-evm: Enable eMMC support | expand |
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts index cee3a8661d5e..d045dc7dde0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts @@ -369,6 +369,13 @@ partition@3fc0000 { }; +&sdhci0 { + status = "okay"; + ti,driver-strength-ohm = <50>; + disable-wp; + bootph-all; +}; + &sdhci1 { /* SD/MMC */ vmmc-supply = <&vdd_mmc1>;
The J722S EVM has an on-board eMMC. Enable the SDHC interface for it. There is no pinmuxing required because the interface has dedicated pins. Signed-off-by: Michael Walle <mwalle@kernel.org> --- arch/arm64/boot/dts/ti/k3-j722s-evm.dts | 7 +++++++ 1 file changed, 7 insertions(+)