diff mbox series

[v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema

Message ID 20240403020439.418788-1-andrew@codeconstruct.com.au (mailing list archive)
State New
Headers show
Series [v2] dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema | expand

Commit Message

Andrew Jeffery April 3, 2024, 2:04 a.m. UTC
Squash warnings such as:

```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
```

The schema binding additionally defines the clocks property over the
prose binding to align with use of the node in the DTS files.

Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
---
v2: Address feedback from Rob and Zev

    - Rob: https://lore.kernel.org/linux-watchdog/20240402180718.GA358505-robh@kernel.org/
    - Zev: https://lore.kernel.org/linux-watchdog/65722a59-2e94-4616-81e1-835615b0e600@hatter.bewilderbeest.net/

v1: https://lore.kernel.org/linux-watchdog/20240402120118.282035-1-andrew@codeconstruct.com.au/

 .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++++++++++++++
 .../bindings/watchdog/aspeed-wdt.txt          |  73 ---------
 2 files changed, 142 insertions(+), 73 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt

Comments

Rob Herring (Arm) April 3, 2024, 5:13 p.m. UTC | #1
On Wed, Apr 03, 2024 at 12:34:39PM +1030, Andrew Jeffery wrote:
> Squash warnings such as:
> 
> ```
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
> ```
> 
> The schema binding additionally defines the clocks property over the
> prose binding to align with use of the node in the DTS files.
> 
> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
> ---
> v2: Address feedback from Rob and Zev
> 
>     - Rob: https://lore.kernel.org/linux-watchdog/20240402180718.GA358505-robh@kernel.org/
>     - Zev: https://lore.kernel.org/linux-watchdog/65722a59-2e94-4616-81e1-835615b0e600@hatter.bewilderbeest.net/
> 
> v1: https://lore.kernel.org/linux-watchdog/20240402120118.282035-1-andrew@codeconstruct.com.au/
> 
>  .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++++++++++++++
>  .../bindings/watchdog/aspeed-wdt.txt          |  73 ---------
>  2 files changed, 142 insertions(+), 73 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
> new file mode 100644
> index 000000000000..be78a9865584
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Aspeed watchdog timer controllers
> +
> +maintainers:
> +  - Andrew Jeffery <andrew@codeconstruct.com.au>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - aspeed,ast2400-wdt
> +      - aspeed,ast2500-wdt
> +      - aspeed,ast2600-wdt
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: >

You don't need '>' either. I guess it is equivalent here as there are no 
double newlines. Drop these if you respin, otherwise:

Reviewed-by: Rob Herring <robh@kernel.org>
Andrew Jeffery April 4, 2024, 12:26 a.m. UTC | #2
On Wed, 2024-04-03 at 12:13 -0500, Rob Herring wrote:
> On Wed, Apr 03, 2024 at 12:34:39PM +1030, Andrew Jeffery wrote:
> > Squash warnings such as:
> > 
> > ```
> > arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
> > ```
> > 
> > The schema binding additionally defines the clocks property over the
> > prose binding to align with use of the node in the DTS files.
> > 
> > Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
> > ---
> > v2: Address feedback from Rob and Zev
> > 
> >     - Rob: https://lore.kernel.org/linux-watchdog/20240402180718.GA358505-robh@kernel.org/
> >     - Zev: https://lore.kernel.org/linux-watchdog/65722a59-2e94-4616-81e1-835615b0e600@hatter.bewilderbeest.net/
> > 
> > v1: https://lore.kernel.org/linux-watchdog/20240402120118.282035-1-andrew@codeconstruct.com.au/
> > 
> >  .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++++++++++++++
> >  .../bindings/watchdog/aspeed-wdt.txt          |  73 ---------
> >  2 files changed, 142 insertions(+), 73 deletions(-)
> >  create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
> >  delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
> > new file mode 100644
> > index 000000000000..be78a9865584
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
> > @@ -0,0 +1,142 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Aspeed watchdog timer controllers
> > +
> > +maintainers:
> > +  - Andrew Jeffery <andrew@codeconstruct.com.au>
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - aspeed,ast2400-wdt
> > +      - aspeed,ast2500-wdt
> > +      - aspeed,ast2600-wdt
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description: >
> 
> You don't need '>' either. I guess it is equivalent here as there are no 
> double newlines. Drop these if you respin, otherwise:
> 
> Reviewed-by: Rob Herring <robh@kernel.org>

Thanks. I've made a note for the future to avoid `>` if it's not
necessary, but at the time I figured it wasn't incorrect to include it.

Andrew
Rob Herring (Arm) April 23, 2024, 2 p.m. UTC | #3
On Wed, 03 Apr 2024 12:34:39 +1030, Andrew Jeffery wrote:
> Squash warnings such as:
> 
> ```
> arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
> ```
> 
> The schema binding additionally defines the clocks property over the
> prose binding to align with use of the node in the DTS files.
> 
> Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
> ---
> v2: Address feedback from Rob and Zev
> 
>     - Rob: https://lore.kernel.org/linux-watchdog/20240402180718.GA358505-robh@kernel.org/
>     - Zev: https://lore.kernel.org/linux-watchdog/65722a59-2e94-4616-81e1-835615b0e600@hatter.bewilderbeest.net/
> 
> v1: https://lore.kernel.org/linux-watchdog/20240402120118.282035-1-andrew@codeconstruct.com.au/
> 
>  .../bindings/watchdog/aspeed,ast2400-wdt.yaml | 142 ++++++++++++++++++
>  .../bindings/watchdog/aspeed-wdt.txt          |  73 ---------
>  2 files changed, 142 insertions(+), 73 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
new file mode 100644
index 000000000000..be78a9865584
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/aspeed,ast2400-wdt.yaml
@@ -0,0 +1,142 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/aspeed,ast2400-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed watchdog timer controllers
+
+maintainers:
+  - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+properties:
+  compatible:
+    enum:
+      - aspeed,ast2400-wdt
+      - aspeed,ast2500-wdt
+      - aspeed,ast2600-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock used to drive the watchdog counter. From the AST2500 no source
+      other than the 1MHz clock can be selected, so the clocks property is
+      optional.
+
+  aspeed,reset-type:
+    $ref: /schemas/types.yaml#/definitions/string
+    enum:
+      - cpu
+      - soc
+      - system
+      - none
+    default: system
+    description: >
+      The watchdog can be programmed to generate one of three different types of
+      reset when a timeout occcurs.
+
+      Specifying 'cpu' will only reset the processor on a timeout event.
+
+      Specifying 'soc' will reset a configurable subset of the SoC's controllers
+      on a timeout event. Controllers critical to the SoC's operation may remain
+      untouched. The set of SoC controllers to reset may be specified via the
+      aspeed,reset-mask property if the node has the aspeed,ast2500-wdt or
+      aspeed,ast2600-wdt compatible.
+
+      Specifying 'system' will reset all controllers on a timeout event, as if
+      EXTRST had been asserted.
+
+      Specifying 'none' will cause the timeout event to have no reset effect.
+      Another watchdog engine on the chip must be used for chip reset operations.
+
+  aspeed,alt-boot:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      Direct the watchdog to configure the SoC to boot from the alternative boot
+      region if a timeout occurs.
+
+  aspeed,external-signal:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      Assert the timeout event on an external signal pin associated with the
+      watchdog controller instance. The pin must be muxed appropriately.
+
+  aspeed,ext-pulse-duration:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: >
+      The duration, in microseconds, of the pulse emitted on the external signal
+      pin.
+
+  aspeed,ext-push-pull:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      If aspeed,external-signal is specified in the node, set the external
+      signal pin's drive type to push-pull. If aspeed,ext-push-pull is not
+      specified then the pin is configured as open-drain.
+
+  aspeed,ext-active-high:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description: >
+      If both aspeed,external-signal and aspeed,ext-push-pull are specified in
+      the node, set the pulse polarity to active-high. If aspeed,ext-active-high
+      is not specified then the pin is configured as active-low.
+
+  aspeed,reset-mask:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+    description: >
+      A bitmask indicating which peripherals will be reset if the watchdog
+      timer expires. On AST2500 SoCs this should be a single word defined using
+      the AST2500_WDT_RESET_* macros; on AST2600 SoCs this should be a two-word
+      array with the first word defined using the AST2600_WDT_RESET1_* macros,
+      and the second word defined using the AST2600_WDT_RESET2_* macros.
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      anyOf:
+        - required:
+            - aspeed,ext-push-pull
+        - required:
+            - aspeed,ext-active-high
+        - required:
+            - aspeed,reset-mask
+    then:
+      properties:
+        compatible:
+          enum:
+            - aspeed,ast2500-wdt
+            - aspeed,ast2600-wdt
+  - if:
+      required:
+        - aspeed,ext-active-high
+    then:
+      required:
+        - aspeed,ext-push-pull
+
+additionalProperties: false
+
+examples:
+  - |
+    watchdog@1e785000 {
+        compatible = "aspeed,ast2400-wdt";
+        reg = <0x1e785000 0x1c>;
+        aspeed,reset-type = "system";
+        aspeed,external-signal;
+    };
+  - |
+    #include <dt-bindings/watchdog/aspeed-wdt.h>
+    watchdog@1e785040 {
+        compatible = "aspeed,ast2600-wdt";
+        reg = <0x1e785040 0x40>;
+        aspeed,reset-type = "soc";
+        aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
+                            (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt b/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
deleted file mode 100644
index 3208adb3e52e..000000000000
--- a/Documentation/devicetree/bindings/watchdog/aspeed-wdt.txt
+++ /dev/null
@@ -1,73 +0,0 @@ 
-Aspeed Watchdog Timer
-
-Required properties:
- - compatible: must be one of:
-	- "aspeed,ast2400-wdt"
-	- "aspeed,ast2500-wdt"
-	- "aspeed,ast2600-wdt"
-
- - reg: physical base address of the controller and length of memory mapped
-   region
-
-Optional properties:
-
- - aspeed,reset-type = "cpu|soc|system|none"
-
-   Reset behavior - Whenever a timeout occurs the watchdog can be programmed
-   to generate one of three different, mutually exclusive, types of resets.
-
-   Type "none" can be specified to indicate that no resets are to be done.
-   This is useful in situations where another watchdog engine on chip is
-   to perform the reset.
-
-   If 'aspeed,reset-type=' is not specified the default is to enable system
-   reset.
-
-   Reset types:
-
-        - cpu: Reset CPU on watchdog timeout
-
-        - soc: Reset 'System on Chip' on watchdog timeout
-
-        - system: Reset system on watchdog timeout
-
-        - none: No reset is performed on timeout. Assumes another watchdog
-                engine is responsible for this.
-
- - aspeed,alt-boot:    If property is present then boot from alternate block.
- - aspeed,external-signal: If property is present then signal is sent to
-			external reset counter (only WDT1 and WDT2). If not
-			specified no external signal is sent.
- - aspeed,ext-pulse-duration: External signal pulse duration in microseconds
-
-Optional properties for AST2500-compatible watchdogs:
- - aspeed,ext-push-pull: If aspeed,external-signal is present, set the pin's
-			 drive type to push-pull. The default is open-drain.
- - aspeed,ext-active-high: If aspeed,external-signal is present and and the pin
-			   is configured as push-pull, then set the pulse
-			   polarity to active-high. The default is active-low.
-
-Optional properties for AST2500- and AST2600-compatible watchdogs:
- - aspeed,reset-mask: A bitmask indicating which peripherals will be reset if
-		      the watchdog timer expires.  On AST2500 this should be a
-		      single word defined using the AST2500_WDT_RESET_* macros;
-		      on AST2600 this should be a two-word array with the first
-		      word defined using the AST2600_WDT_RESET1_* macros and the
-		      second word defined using the AST2600_WDT_RESET2_* macros.
-
-Examples:
-
-	wdt1: watchdog@1e785000 {
-		compatible = "aspeed,ast2400-wdt";
-		reg = <0x1e785000 0x1c>;
-		aspeed,reset-type = "system";
-		aspeed,external-signal;
-	};
-
-	#include <dt-bindings/watchdog/aspeed-wdt.h>
-	wdt2: watchdog@1e785040 {
-		compatible = "aspeed,ast2600-wdt";
-		reg = <0x1e785040 0x40>;
-		aspeed,reset-mask = <AST2600_WDT_RESET1_DEFAULT
-				     (AST2600_WDT_RESET2_DEFAULT & ~AST2600_WDT_RESET2_LPC)>;
-	};