| Message ID | 20240408030734.1191069-1-mirela.rabulea@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v4,1/2] dt-bindings: media: imx8-jpeg: Add clocks entries | expand |
On 08/04/2024 05:07, Mirela Rabulea wrote: > From: Fabio Estevam <festevam@gmail.com> > > The JPEG decoder/encoder present in iMX8QXP and iMX8QM SoCs need > the PER and IPG clocks to be functional, so add the clock entries. > > This also fixes the following schema warning: > > imx8qm-apalis-eval.dtb: jpegdec@58400000: 'assigned-clock-rates', 'assigned-clocks', 'clock-names', 'clocks' do not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/media/nxp,imx8-jpeg.yaml# > > Signed-off-by: Fabio Estevam <festevam@denx.de> > Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> > --- > Please correct subject. You already got comments on this. https://lore.kernel.org/linux-devicetree/2fb8c43c-c079-e04e-f727-3bc1dc29996e@linaro.org/ > Changes since v3: > - Add items for clocks (per Krzysztof's feddback) > - Add description for clocks (per Conor's feddback to the other similar patch from Alexander) > - Add "media:" to the subject Where? It was there before, so what did you change? > - Add Mirela's signed-off > - For the similar patches that were sent for this issue, should Co-developed-by/Signed-off-by be added? Alexander Stein? Frank Li? > > Changes since v2: > - Remove clock-names. (Mirela) > > .../devicetree/bindings/media/nxp,imx8-jpeg.yaml | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml > index 3d9d1db37040..cc040feb77d7 100644 > --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml > +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml > @@ -31,6 +31,14 @@ properties: > reg: > maxItems: 1 > > + clocks: > + description: > + The JPEG decoder/encoder requires two clocks for it's wrapper (AXI and APB), > + and one clock for it's core engine (AXI, same source as for the wrapper) Description is now redundant, drop it. > + items: > + - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per) > + - description: IP bus clock for register access (ipg) > + > interrupts: > description: | > There are 4 slots available in the IP, which the driver may use > @@ -49,6 +57,7 @@ properties: > required: > - compatible > - reg > + - clocks > - interrupts > - power-domains Best regards, Krzysztof
Hi Krzysztof, On 08.04.2024 09:38, Krzysztof Kozlowski wrote: > Please correct subject. You already got comments on this. > https://lore.kernel.org/linux-devicetree/2fb8c43c-c079-e04e-f727-3bc1dc29996e@linaro.org/ Sorry I missed that. I will update the prefix to "media: dt-bindings: nxp,imx8-jpeg:". as you suggested in v2. >> Changes since v3: >> - Add items for clocks (per Krzysztof's feddback) >> - Add description for clocks (per Conor's feddback to the other similar patch from Alexander) >> - Add "media:" to the subject > Where? It was there before, so what did you change? I started from v3 here: https://lore.kernel.org/linux-devicetree/20230912163810.1750488-1-festevam@gmail.com/ The subject was: "[PATCH v3 1/3] dt-bindings: imx8-jpeg: Add clocks entries", I had just added "media:". Anyways, will update it again. >> + clocks: >> + description: >> + The JPEG decoder/encoder requires two clocks for it's wrapper (AXI and APB), >> + and one clock for it's core engine (AXI, same source as for the wrapper) > Description is now redundant, drop it. Ok, I will do so in v5. Thanks a lot for feedback, Mirela
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml index 3d9d1db37040..cc040feb77d7 100644 --- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml +++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml @@ -31,6 +31,14 @@ properties: reg: maxItems: 1 + clocks: + description: + The JPEG decoder/encoder requires two clocks for it's wrapper (AXI and APB), + and one clock for it's core engine (AXI, same source as for the wrapper) + items: + - description: AXI DMA engine clock for fetching JPEG bitstream from memory (per) + - description: IP bus clock for register access (ipg) + interrupts: description: | There are 4 slots available in the IP, which the driver may use @@ -49,6 +57,7 @@ properties: required: - compatible - reg + - clocks - interrupts - power-domains @@ -56,12 +65,15 @@ additionalProperties: false examples: - | + #include <dt-bindings/clock/imx8-lpcg.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/firmware/imx/rsrc.h> jpegdec: jpegdec@58400000 { compatible = "nxp,imx8qxp-jpgdec"; reg = <0x58400000 0x00050000 >; + clocks = <&img_jpeg_dec_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg_dec_lpcg IMX_LPCG_CLK_4>; interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>, @@ -76,6 +88,8 @@ examples: jpegenc: jpegenc@58450000 { compatible = "nxp,imx8qm-jpgenc", "nxp,imx8qxp-jpgenc"; reg = <0x58450000 0x00050000 >; + clocks = <&img_jpeg_enc_lpcg IMX_LPCG_CLK_0>, + <&img_jpeg__lpcg IMX_LPCG_CLK_4>; interrupts = <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,