diff mbox series

[1/1] arm64: dts: rockchip: enable onboard spi flash for rock-3a

Message ID 20240408124005.182565-1-amadeus@jmu.edu.cn (mailing list archive)
State New, archived
Headers show
Series [1/1] arm64: dts: rockchip: enable onboard spi flash for rock-3a | expand

Commit Message

Chukun Pan April 8, 2024, 12:40 p.m. UTC
There is a mx25u12835f spi flash on this board, enable it.

[    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---
 arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Jonas Karlman April 8, 2024, 2:44 p.m. UTC | #1
Hi Chukun,

On 2024-04-08 14:40, Chukun Pan wrote:
> There is a mx25u12835f spi flash on this board, enable it.
> 
> [    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
> 
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index a5e974ea659e..d8738cc47c73 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -757,6 +757,18 @@ &sdmmc2 {
>  	status = "okay";
>  };
>  
> +&sfc {

This is missing:

	#address-cells = <1>;
	#size-cells = <0>;

> +	status = "okay";
> +
> +	flash@0 {
> +		compatible = "jedec,spi-nor";
> +		reg = <0x0>;
> +		spi-max-frequency = <50000000>;

At least in U-Boot the spi clock only support 24, 100 or 200 mhz and I
am pretty sure the spi flash support 100mhz, so I would suggest you test
with 100mhz, same as used on other rk356x boards.

For U-Boot I have used 24 mhz for rk356x boards not defining a flash@0
node in linux device tree, such as the rock-3a board.

Regards,
Jonas

> +		spi-rx-bus-width = <4>;
> +		spi-tx-bus-width = <1>;
> +	};
> +};
> +
>  &tsadc {
>  	rockchip,hw-tshut-mode = <1>;
>  	rockchip,hw-tshut-polarity = <0>;
Jonas Karlman April 8, 2024, 2:56 p.m. UTC | #2
Hi again,

On 2024-04-08 16:44, Jonas Karlman wrote:
> Hi Chukun,
> 
> On 2024-04-08 14:40, Chukun Pan wrote:
>> There is a mx25u12835f spi flash on this board, enable it.
>>
>> [    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
>>
>> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
>> ---
>>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
>>  1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
>> index a5e974ea659e..d8738cc47c73 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
>> @@ -757,6 +757,18 @@ &sdmmc2 {
>>  	status = "okay";
>>  };
>>  
>> +&sfc {
> 
> This is missing:
> 
> 	#address-cells = <1>;
> 	#size-cells = <0>;
> 
>> +	status = "okay";
>> +
>> +	flash@0 {
>> +		compatible = "jedec,spi-nor";
>> +		reg = <0x0>;
>> +		spi-max-frequency = <50000000>;
> 
> At least in U-Boot the spi clock only support 24, 100 or 200 mhz and I
> am pretty sure the spi flash support 100mhz, so I would suggest you test
> with 100mhz, same as used on other rk356x boards.

Sorry, looked at spi clock instead of sfc clock.
sfc clock support 24, 50, 75, 100, 125 and 150 mhz.

Regards,
Jonas

> 
> For U-Boot I have used 24 mhz for rk356x boards not defining a flash@0
> node in linux device tree, such as the rock-3a board.
> 
> Regards,
> Jonas
> 
>> +		spi-rx-bus-width = <4>;
>> +		spi-tx-bus-width = <1>;
>> +	};
>> +};
>> +
>>  &tsadc {
>>  	rockchip,hw-tshut-mode = <1>;
>>  	rockchip,hw-tshut-polarity = <0>;
>
Heiko Stuebner April 8, 2024, 3:04 p.m. UTC | #3
Am Montag, 8. April 2024, 16:56:59 CEST schrieb Jonas Karlman:
> On 2024-04-08 16:44, Jonas Karlman wrote:
> > On 2024-04-08 14:40, Chukun Pan wrote:
> >> There is a mx25u12835f spi flash on this board, enable it.
> >>
> >> [    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
> >>
> >> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> >> ---
> >>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
> >>  1 file changed, 12 insertions(+)
> >>
> >> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> >> index a5e974ea659e..d8738cc47c73 100644
> >> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> >> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> >> @@ -757,6 +757,18 @@ &sdmmc2 {
> >>  	status = "okay";
> >>  };
> >>  
> >> +&sfc {
> > 
> > This is missing:
> > 
> > 	#address-cells = <1>;
> > 	#size-cells = <0>;
> > 
> >> +	status = "okay";
> >> +
> >> +	flash@0 {
> >> +		compatible = "jedec,spi-nor";
> >> +		reg = <0x0>;
> >> +		spi-max-frequency = <50000000>;
> > 
> > At least in U-Boot the spi clock only support 24, 100 or 200 mhz and I
> > am pretty sure the spi flash support 100mhz, so I would suggest you test
> > with 100mhz, same as used on other rk356x boards.
> 
> Sorry, looked at spi clock instead of sfc clock.
> sfc clock support 24, 50, 75, 100, 125 and 150 mhz.

I think in some previous discussion the agreement was that the node
should specify the max frequency the flash supports and have the
controller worry about its own clock ranges.

Though in this case the 50MHz for the flash even matches the clock
frequency supported by the sfc
Jonas Karlman April 8, 2024, 3:14 p.m. UTC | #4
On 2024-04-08 17:04, Heiko Stübner wrote:
> Am Montag, 8. April 2024, 16:56:59 CEST schrieb Jonas Karlman:
>> On 2024-04-08 16:44, Jonas Karlman wrote:
>>> On 2024-04-08 14:40, Chukun Pan wrote:
>>>> There is a mx25u12835f spi flash on this board, enable it.
>>>>
>>>> [    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
>>>>
>>>> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
>>>> ---
>>>>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
>>>>  1 file changed, 12 insertions(+)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
>>>> index a5e974ea659e..d8738cc47c73 100644
>>>> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
>>>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
>>>> @@ -757,6 +757,18 @@ &sdmmc2 {
>>>>  	status = "okay";
>>>>  };
>>>>  
>>>> +&sfc {
>>>
>>> This is missing:
>>>
>>> 	#address-cells = <1>;
>>> 	#size-cells = <0>;
>>>
>>>> +	status = "okay";
>>>> +
>>>> +	flash@0 {
>>>> +		compatible = "jedec,spi-nor";
>>>> +		reg = <0x0>;
>>>> +		spi-max-frequency = <50000000>;
>>>
>>> At least in U-Boot the spi clock only support 24, 100 or 200 mhz and I
>>> am pretty sure the spi flash support 100mhz, so I would suggest you test
>>> with 100mhz, same as used on other rk356x boards.
>>
>> Sorry, looked at spi clock instead of sfc clock.
>> sfc clock support 24, 50, 75, 100, 125 and 150 mhz.
> 
> I think in some previous discussion the agreement was that the node
> should specify the max frequency the flash supports and have the
> controller worry about its own clock ranges.

Interesting, sounds like there is a need to do some modification to spi
and clk drivers in U-Boot to support that.

> 
> Though in this case the 50MHz for the flash even matches the clock
> frequency supported by the sfc

I think the on-board spi nor flash support 104/108/133 mhz so 50 mhz is
wrong in any case.

Regards,
Jonas

> 
>
Chukun Pan April 9, 2024, 3:28 a.m. UTC | #5
> I think the on-board spi nor flash support 104/108/133 mhz
> so 50 mhz is wrong in any case.

Thanks, I tested 104MHz on linux and it works fine. As for
133 MHz, only MX25U12835FZNI-08G supports it. And I didn't
find it support 108MHz in the datasheet of MX25U12835F.

Thanks,
Chukun
Rob Herring (Arm) April 9, 2024, 1:38 p.m. UTC | #6
On Mon, 08 Apr 2024 20:40:05 +0800, Chukun Pan wrote:
> There is a mx25u12835f spi flash on this board, enable it.
> 
> [    2.525805] spi-nor spi4.0: mx25u12835f (16384 Kbytes)
> 
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y rockchip/rk3568-rock-3a.dtb' for 20240408124005.182565-1-amadeus@jmu.edu.cn:

arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts:765.3-15: Warning (reg_format): /spi@fe300000/flash@0:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1091.20-1100.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #address-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts:760.6-770.3
arch/arm64/boot/dts/rockchip/rk356x.dtsi:1091.20-1100.4: Warning (spi_bus_bridge): /spi@fe300000: incorrect #size-cells for SPI bus
  also defined at arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts:760.6-770.3
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dtb: Warning (spi_bus_reg): Failed prerequisite 'spi_bus_bridge'
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts:763.10-769.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts:763.10-769.4: Warning (avoid_default_addr_size): /spi@fe300000/flash@0: Relying on default #size-cells value
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index a5e974ea659e..d8738cc47c73 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -757,6 +757,18 @@  &sdmmc2 {
 	status = "okay";
 };
 
+&sfc {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+	};
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <1>;
 	rockchip,hw-tshut-polarity = <0>;