[1/1] arm64: dts: imx8mp: Enable HDMI on TQMa8MPxL/MBa8MPxL

Commit Message

Alexander Stein April 10, 2024, 6:37 a.m. UTC

Enable HDMI nodes and add the output connector.

Signed-off-by: Alexander Stein <[e-mail]>
---
 .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 38 +++++++++++++++++++
 1 file changed, 38 insertions(+)

Comments

Shawn Guo April 22, 2024, 4:58 a.m. UTC | #1

On Wed, Apr 10, 2024 at 08:37:05AM +0200, Alexander Stein wrote:
> Enable HDMI nodes and add the output connector.
> 
> Signed-off-by: Alexander Stein <[e-mail]>

Applied, thanks!

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 86d3da36e4f3e..c51ed7d991d18 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -135,6 +135,18 @@  led-2 {
 		};
 	};
 
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "X44";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
 	display: display {
 		/*
 		 * Display is not fixed, so compatible has to be added from
@@ -470,6 +482,28 @@  &gpio5 {
 			  "", "", "", "";
 };
 
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_connector_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
 &i2c2 {
 	clock-frequency = <384000>;
 	pinctrl-names = "default", "gpio";
@@ -531,6 +565,10 @@  &i2c6 {
 	status = "okay";
 };
 
+&lcdif3 {
+	status = "okay";
+};
+
 &pcf85063 {
 	/* RTC_EVENT# is connected on MBa8MPxL */
 	pinctrl-names = "default";