diff mbox series

[v4,1/2] dt-bindings: mtd: amlogic,meson-nand: support fields for boot ROM code

Message ID 20240410185409.2635622-2-avkrasnov@salutedevices.com (mailing list archive)
State New, archived
Headers show
Series Meson: R/W support for pages used by boot ROM | expand

Commit Message

Arseniy Krasnov April 10, 2024, 6:54 p.m. UTC
Boot ROM code on Meson requires that some pages on NAND must be written
in special mode: "short" ECC mode where each block is 384 bytes and
scrambling mode is on. Such pages located with the specified interval
within specified offset. Both interval and offset are located in the
device tree and used by driver if 'nand-is-boot-medium' is set for
NAND chip.

Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
---
 .../bindings/mtd/amlogic,meson-nand.yaml           | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Rob Herring (Arm) April 15, 2024, 9:27 p.m. UTC | #1
On Wed, Apr 10, 2024 at 09:54:08PM +0300, Arseniy Krasnov wrote:
> Boot ROM code on Meson requires that some pages on NAND must be written
> in special mode: "short" ECC mode where each block is 384 bytes and
> scrambling mode is on. Such pages located with the specified interval
> within specified offset. Both interval and offset are located in the
> device tree and used by driver if 'nand-is-boot-medium' is set for
> NAND chip.
> 
> Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
> ---
>  .../bindings/mtd/amlogic,meson-nand.yaml           | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> index 57b6957c8415..838ae1847ef0 100644
> --- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> +++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
> @@ -64,11 +64,25 @@ patternProperties:
>          items:
>            maximum: 0
>  
> +      amlogic,boot-pages:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          The NFC driver needs this information to select ECC
> +          algorithms supported by the boot ROM.

'the $driver drivers needs this information' is true for every property, 
so it's redundant. You fail to say *what* the property represents or 
defines.

> +
> +      amlogic,boot-page-step:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          The NFC driver needs this information to select ECC
> +          algorithms supported by the boot ROM (in pages).

Same issue here.

> +
>      unevaluatedProperties: false
>  
>      dependencies:
>        nand-ecc-strength: [nand-ecc-step-size]
>        nand-ecc-step-size: [nand-ecc-strength]
> +      amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
> +      amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
>  
>  
>  required:
> -- 
> 2.35.0
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
index 57b6957c8415..838ae1847ef0 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -64,11 +64,25 @@  patternProperties:
         items:
           maximum: 0
 
+      amlogic,boot-pages:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The NFC driver needs this information to select ECC
+          algorithms supported by the boot ROM.
+
+      amlogic,boot-page-step:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description:
+          The NFC driver needs this information to select ECC
+          algorithms supported by the boot ROM (in pages).
+
     unevaluatedProperties: false
 
     dependencies:
       nand-ecc-strength: [nand-ecc-step-size]
       nand-ecc-step-size: [nand-ecc-strength]
+      amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
+      amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
 
 
 required: