| Message ID | 20240415095605.3547933-2-u-kumar1@ti.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Fix UART pin type and macro type | expand |
On Mon, Apr 15, 2024 at 03:26:04PM +0530, Udit Kumar wrote: > Along fixing wkup UART TX pin as OUTPUT instead of INPUT, > updating J784S4 macro for pin mux instead of J721S2. > > Fixes: 5dfbd1debc8c ("arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom") > Fixes: 6fa5d37a2f34 ("arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts") > Signed-off-by: Udit Kumar <u-kumar1@ti.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts index 81fd7afac8c5..d511b25d62e3 100644 --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts @@ -343,16 +343,16 @@ &wkup_pmx2 { wkup_uart0_pins_default: wkup-uart0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ - J721S2_WKUP_IOPAD(0x04c, PIN_INPUT, 0) /* (K34) WKUP_UART0_TXD */ + J784S4_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (K35) WKUP_UART0_RXD */ + J784S4_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (K34) WKUP_UART0_TXD */ >; }; wkup_i2c0_pins_default: wkup-i2c0-default-pins { bootph-all; pinctrl-single,pins = < - J721S2_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ - J721S2_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ + J784S4_WKUP_IOPAD(0x98, PIN_INPUT, 0) /* (N33) WKUP_I2C0_SCL */ + J784S4_WKUP_IOPAD(0x9c, PIN_INPUT, 0) /* (N35) WKUP_I2C0_SDA */ >; };
Along fixing wkup UART TX pin as OUTPUT instead of INPUT, updating J784S4 macro for pin mux instead of J721S2. Fixes: 5dfbd1debc8c ("arm64: dts: ti: k3-j784s4-evm: Enable wakeup_i2c0 and eeprom") Fixes: 6fa5d37a2f34 ("arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts") Signed-off-by: Udit Kumar <u-kumar1@ti.com> --- arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)