@@ -19,7 +19,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
-#include <linux/syscore_ops.h>
+#include <linux/pm.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -64,8 +64,6 @@ struct stm32_exti_host_data {
bool dt_has_irqs_desc; /* skip internal desc_irqs array and get it from DT */
};
-static struct stm32_exti_host_data *stm32_host_data;
-
static const struct stm32_exti_bank stm32f4xx_exti_b1 = {
.imr_ofst = 0x00,
.emr_ofst = 0x04,
@@ -622,50 +620,32 @@ static int stm32_exti_h_set_affinity(struct irq_data *d,
return IRQ_SET_MASK_OK_DONE;
}
-static int __maybe_unused stm32_exti_h_suspend(void)
+static int stm32_exti_h_suspend(struct device *dev)
{
+ struct stm32_exti_host_data *host_data = dev_get_drvdata(dev);
struct stm32_exti_chip_data *chip_data;
int i;
- for (i = 0; i < stm32_host_data->drv_data->bank_nr; i++) {
- chip_data = &stm32_host_data->chips_data[i];
- raw_spin_lock(&chip_data->rlock);
+ for (i = 0; i < host_data->drv_data->bank_nr; i++) {
+ chip_data = &host_data->chips_data[i];
stm32_chip_suspend(chip_data, chip_data->wake_active);
- raw_spin_unlock(&chip_data->rlock);
}
return 0;
}
-static void __maybe_unused stm32_exti_h_resume(void)
+static int stm32_exti_h_resume(struct device *dev)
{
+ struct stm32_exti_host_data *host_data = dev_get_drvdata(dev);
struct stm32_exti_chip_data *chip_data;
int i;
- for (i = 0; i < stm32_host_data->drv_data->bank_nr; i++) {
- chip_data = &stm32_host_data->chips_data[i];
- raw_spin_lock(&chip_data->rlock);
+ for (i = 0; i < host_data->drv_data->bank_nr; i++) {
+ chip_data = &host_data->chips_data[i];
stm32_chip_resume(chip_data, chip_data->mask_cache);
- raw_spin_unlock(&chip_data->rlock);
}
-}
-static struct syscore_ops stm32_exti_h_syscore_ops = {
-#ifdef CONFIG_PM_SLEEP
- .suspend = stm32_exti_h_suspend,
- .resume = stm32_exti_h_resume,
-#endif
-};
-
-static void stm32_exti_h_syscore_init(struct stm32_exti_host_data *host_data)
-{
- stm32_host_data = host_data;
- register_syscore_ops(&stm32_exti_h_syscore_ops);
-}
-
-static void stm32_exti_h_syscore_deinit(void)
-{
- unregister_syscore_ops(&stm32_exti_h_syscore_ops);
+ return 0;
}
static int stm32_exti_h_retrigger(struct irq_data *d)
@@ -789,8 +769,6 @@ stm32_exti_host_data *stm32_exti_host_init(const struct stm32_exti_drv_data *dd,
goto free_chips_data;
}
- stm32_host_data = host_data;
-
return host_data;
free_chips_data:
@@ -916,11 +894,6 @@ static void stm32_exti_remove_irq(void *data)
irq_domain_remove(domain);
}
-static void stm32_exti_remove(struct platform_device *pdev)
-{
- stm32_exti_h_syscore_deinit();
-}
-
static int stm32_exti_probe(struct platform_device *pdev)
{
int ret, i;
@@ -934,6 +907,8 @@ static int stm32_exti_probe(struct platform_device *pdev)
if (!host_data)
return -ENOMEM;
+ dev_set_drvdata(dev, host_data);
+
/* check for optional hwspinlock which may be not available yet */
ret = of_hwspin_lock_get_id(np, 0);
if (ret == -EPROBE_DEFER)
@@ -996,8 +971,6 @@ static int stm32_exti_probe(struct platform_device *pdev)
if (of_property_read_bool(np, "interrupts-extended"))
host_data->dt_has_irqs_desc = true;
- stm32_exti_h_syscore_init(host_data);
-
return 0;
}
@@ -1009,12 +982,16 @@ static const struct of_device_id stm32_exti_ids[] = {
};
MODULE_DEVICE_TABLE(of, stm32_exti_ids);
+static const struct dev_pm_ops stm32_exti_dev_pm_ops = {
+ NOIRQ_SYSTEM_SLEEP_PM_OPS(stm32_exti_h_suspend, stm32_exti_h_resume)
+};
+
static struct platform_driver stm32_exti_driver = {
.probe = stm32_exti_probe,
- .remove_new = stm32_exti_remove,
.driver = {
.name = "stm32_exti",
.of_match_table = stm32_exti_ids,
+ .pm = &stm32_exti_dev_pm_ops,
},
};
All driver's dependencies for suspend/resume have been fixed long ago. There are no more reasons to use syscore PM for the part of this driver related to Cortex-A MPU. Switch to standard PM using NOIRQ_SYSTEM_SLEEP_PM_OPS, so all the registers of the interrupt controller get resumed before any irq gets enabled. A side effect of this change is to drop the only global variable 'stm32_host_data', used to keep the driver's data for syscore_ops. This makes the driver ready to support multiple EXTI instances. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> --- drivers/irqchip/irq-stm32-exti.c | 57 ++++++++++---------------------- 1 file changed, 17 insertions(+), 40 deletions(-)