diff mbox series

[3/7] PCI: xilinx-nwl: Fix register misspelling

Message ID 20240422195904.3591683-4-sean.anderson@linux.dev (mailing list archive)
State New
Headers show
Series PCI: xilinx-nwl: Add phy support | expand

Commit Message

Sean Anderson April 22, 2024, 7:59 p.m. UTC 
MSIC -> MISC

Fixes: c2a7ff18edcd ("PCI: xilinx-nwl: Expand error logging")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
---

 drivers/pci/controller/pcie-xilinx-nwl.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 437927e3bcca..ce881baac6d8 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -80,8 +80,8 @@ 
 #define MSGF_MISC_SR_NON_FATAL_DEV	BIT(22)
 #define MSGF_MISC_SR_FATAL_DEV		BIT(23)
 #define MSGF_MISC_SR_LINK_DOWN		BIT(24)
-#define MSGF_MSIC_SR_LINK_AUTO_BWIDTH	BIT(25)
-#define MSGF_MSIC_SR_LINK_BWIDTH	BIT(26)
+#define MSGF_MISC_SR_LINK_AUTO_BWIDTH	BIT(25)
+#define MSGF_MISC_SR_LINK_BWIDTH	BIT(26)
 
 #define MSGF_MISC_SR_MASKALL		(MSGF_MISC_SR_RXMSG_AVAIL | \
 					MSGF_MISC_SR_RXMSG_OVER | \
@@ -96,8 +96,8 @@ 
 					MSGF_MISC_SR_NON_FATAL_DEV | \
 					MSGF_MISC_SR_FATAL_DEV | \
 					MSGF_MISC_SR_LINK_DOWN | \
-					MSGF_MSIC_SR_LINK_AUTO_BWIDTH | \
-					MSGF_MSIC_SR_LINK_BWIDTH)
+					MSGF_MISC_SR_LINK_AUTO_BWIDTH | \
+					MSGF_MISC_SR_LINK_BWIDTH)
 
 /* Legacy interrupt status mask bits */
 #define MSGF_LEG_SR_INTA		BIT(0)
@@ -299,10 +299,10 @@  static irqreturn_t nwl_pcie_misc_handler(int irq, void *data)
 	if (misc_stat & MSGF_MISC_SR_FATAL_DEV)
 		dev_err(dev, "Fatal Error Detected\n");
 
-	if (misc_stat & MSGF_MSIC_SR_LINK_AUTO_BWIDTH)
+	if (misc_stat & MSGF_MISC_SR_LINK_AUTO_BWIDTH)
 		dev_info(dev, "Link Autonomous Bandwidth Management Status bit set\n");
 
-	if (misc_stat & MSGF_MSIC_SR_LINK_BWIDTH)
+	if (misc_stat & MSGF_MISC_SR_LINK_BWIDTH)
 		dev_info(dev, "Link Bandwidth Management Status bit set\n");
 
 	/* Clear misc interrupt status */