diff mbox series

arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C

Message ID 20240425152558.485763-1-ggiordano@phytec.com (mailing list archive)
State New, archived
Headers show
Series arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C | expand

Commit Message

Garrett Giordano April 25, 2024, 3:25 p.m. UTC
The USB-C PD manages plug orientation, power delivery, and our endpoint
for the USB interface. Add this node and include its endpoint.

Configure USB0 for role-switching and wire it to our USB-C PD endpoint.

Signed-off-by: Garrett Giordano <ggiordano@phytec.com>
---
 .../dts/ti/k3-am625-phyboard-lyra-rdk.dts     | 26 ++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

Comments

Wadim Egorov April 26, 2024, 12:54 p.m. UTC | #1
Hi Garrett,

thanks for sending!

It seems like this patch completes the board's support. Every 
interface/component is now fully supported.

Am 25.04.24 um 17:25 schrieb Garrett Giordano:
> The USB-C PD manages plug orientation, power delivery, and our endpoint
> for the USB interface. Add this node and include its endpoint.
> 
> Configure USB0 for role-switching and wire it to our USB-C PD endpoint.
> 
> Signed-off-by: Garrett Giordano <ggiordano@phytec.com>

Reviewed-by: Wadim Egorov <w.egorov@phytec.de>

> ---
>   .../dts/ti/k3-am625-phyboard-lyra-rdk.dts     | 26 ++++++++++++++++++-
>   1 file changed, 25 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> index dfc78995d30a..fb3bc914a018 100644
> --- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
> @@ -348,6 +348,24 @@ gpio_exp: gpio-expander@21 {
>   				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
>   	};
>   
> +	usb-pd@22 {
> +		compatible = "ti,tps6598x";
> +		reg = <0x22>;
> +
> +		connector {
> +			compatible = "usb-c-connector";
> +			label = "USB-C";
> +			self-powered;
> +			data-role = "dual";
> +			power-role = "sink";
> +			port {
> +				usb_con_hs: endpoint {
> +					remote-endpoint = <&typec_hs>;
> +				};
> +			};
> +		};
> +	};
> +
>   	sii9022: bridge-hdmi@39 {
>   		compatible = "sil,sii9022";
>   		reg = <0x39>;
> @@ -449,7 +467,13 @@ &usbss1 {
>   };
>   
>   &usb0 {
> -	dr_mode = "peripheral";
> +	usb-role-switch;
> +
> +	port {
> +		typec_hs: endpoint {
> +			remote-endpoint = <&usb_con_hs>;
> +		};
> +	};
>   };
>   
>   &usb1 {
Nishanth Menon April 26, 2024, 10:43 p.m. UTC | #2
Hi Garrett Giordano,

On Thu, 25 Apr 2024 08:25:58 -0700, Garrett Giordano wrote:
> The USB-C PD manages plug orientation, power delivery, and our endpoint
> for the USB interface. Add this node and include its endpoint.
> 
> Configure USB0 for role-switching and wire it to our USB-C PD endpoint.
> 
> 

I have applied the following to branch ti-k3-dts-next on [1].
Thank you!

[1/1] arm64: dts: ti: k3-am625-phyboard-lyra-rdk: Add USB-C
      commit: 3454b58dd9d99e317871e9abd57f589ae7580642

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent up the chain during
the next merge window (or sooner if it is a relevant bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

[1] https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
index dfc78995d30a..fb3bc914a018 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-phyboard-lyra-rdk.dts
@@ -348,6 +348,24 @@  gpio_exp: gpio-expander@21 {
 				  "GPIO6_ETH1_USER_RESET", "GPIO7_AUDIO_USER_RESET";
 	};
 
+	usb-pd@22 {
+		compatible = "ti,tps6598x";
+		reg = <0x22>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			self-powered;
+			data-role = "dual";
+			power-role = "sink";
+			port {
+				usb_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
 	sii9022: bridge-hdmi@39 {
 		compatible = "sil,sii9022";
 		reg = <0x39>;
@@ -449,7 +467,13 @@  &usbss1 {
 };
 
 &usb0 {
-	dr_mode = "peripheral";
+	usb-role-switch;
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
 };
 
 &usb1 {