diff mbox series

[v2,1/2] dt-bindings: regulator: st,stm32mp1-pwr-reg: add compatible for STM32MP13

Message ID 20240426203245.v2.1.Ia0a99d90acb512aa020a6e7a8cca8cc1b71f1759@changeid (mailing list archive)
State Changes Requested
Headers show
Series ARM: st: add new compatible for PWR regulators on STM32MP13 | expand

Commit Message

Patrick Delaunay April 26, 2024, 6:32 p.m. UTC
Add new compatible "st,stm32mp13-pwr-reg" for STM32MP13 SoC family.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
---

Changes in v2:
- update for Rob review, only add compatible for STM32MP13 family

 .../devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml    | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

Comments

Rob Herring April 26, 2024, 7:22 p.m. UTC | #1
On Fri, 26 Apr 2024 20:32:50 +0200, Patrick Delaunay wrote:
> Add new compatible "st,stm32mp13-pwr-reg" for STM32MP13 SoC family.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> Changes in v2:
> - update for Rob review, only add compatible for STM32MP13 family
> 
>  .../devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml    | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml:15:5: [warning] wrong indentation: expected 6 but found 4 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml: properties:compatible:oneOf: [{'const': 'st,stm32mp1,pwr-reg'}, {'const': 'st,stm32mp13-pwr-reg'}] should not be valid under {'items': {'propertyNames': {'const': 'const'}, 'required': ['const']}}
	hint: Use 'enum' rather than 'oneOf' + 'const' entries
	from schema $id: http://devicetree.org/meta-schemas/keywords.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240426203245.v2.1.Ia0a99d90acb512aa020a6e7a8cca8cc1b71f1759@changeid

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Krzysztof Kozlowski April 29, 2024, 5:11 a.m. UTC | #2
On 26/04/2024 20:32, Patrick Delaunay wrote:
> Add new compatible "st,stm32mp13-pwr-reg" for STM32MP13 SoC family.
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
> ---
> 
> Changes in v2:
> - update for Rob review, only add compatible for STM32MP13 family

Please start testing your patches BEFORE sending.

Best regards,
Krzysztof
Patrick Delaunay May 13, 2024, 9:46 a.m. UTC | #3
On 4/29/24 07:11, Krzysztof Kozlowski wrote:
> On 26/04/2024 20:32, Patrick Delaunay wrote:
>> Add new compatible "st,stm32mp13-pwr-reg" for STM32MP13 SoC family.
>>
>> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>> ---
>>
>> Changes in v2:
>> - update for Rob review, only add compatible for STM32MP13 family
> Please start testing your patches BEFORE sending.


Sorry,

I don't know why I don't see the issue even if I executed

make dt_binding_check SCHEMA_FILES=stm32


I will sent a V3

and I update my way of working to avoid this error

=> clean the output biding directory before to execute again 
"dt_binding_check"


>
> Best regards,
> Krzysztof


Regards

Patrick
Krzysztof Kozlowski May 13, 2024, 11:56 a.m. UTC | #4
On 13/05/2024 11:46, Patrick DELAUNAY wrote:
> 
> On 4/29/24 07:11, Krzysztof Kozlowski wrote:
>> On 26/04/2024 20:32, Patrick Delaunay wrote:
>>> Add new compatible "st,stm32mp13-pwr-reg" for STM32MP13 SoC family.
>>>
>>> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
>>> ---
>>>
>>> Changes in v2:
>>> - update for Rob review, only add compatible for STM32MP13 family
>> Please start testing your patches BEFORE sending.
> 
> 
> Sorry,
> 
> I don't know why I don't see the issue even if I executed
> 
> make dt_binding_check SCHEMA_FILES=stm32

The code is incorrect, which is easily visible by the diff. dtschema
detects it so, your setup is probably not complete, if you claim you run
it before sending. writing-schema doc has short guide how to setup, but
that's basically only one command - pip install dtschema

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
index c9586d277f41..b0c6c62a84ea 100644
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -11,7 +11,9 @@  maintainers:
 
 properties:
   compatible:
-    const: st,stm32mp1,pwr-reg
+    oneOf:
+    - const: st,stm32mp1,pwr-reg
+    - const: st,stm32mp13-pwr-reg
 
   reg:
     maxItems: 1