diff mbox series

[3/3] ARM: spitz: Use software nodes for the ADS7846 touchscreen

Message ID 20240430-gpio-leds-miscarm-v1-3-9c94d7711f6c@linaro.org (mailing list archive)
State New, archived
Headers show
Series ARM: Modernize the PXA Spitz a bit | expand

Commit Message

Linus Walleij April 30, 2024, 7:03 a.m. UTC
Convert the Spitz to use software nodes for SPI CS and the
ADS7846 touchscreen following the pattern used in the TI
platforms.

The Spitz is the only user of the wait_for_sync() callback in
the platform data, so define that this is a separate GPIO
in the device tree bindings (previous patch) and handle this
directly inside the ADS7846 driver instead.

Add some infrastructure to the PXA boardfile common code to
handle software nodes attached to the SPI bus instead of
platform data.

The SPI core will investigate the numner of GPIO handles to
figure out the number of chipselects used on the platform, so
no explicit encoding of the number of the number of chipselects
is needed.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 arch/arm/mach-pxa/devices.c         | 16 ++++++++
 arch/arm/mach-pxa/spitz.c           | 75 +++++++++++++++++++------------------
 drivers/input/touchscreen/ads7846.c | 31 ++++++++++-----
 include/linux/spi/ads7846.h         |  1 -
 include/linux/spi/pxa2xx_spi.h      |  2 +
 5 files changed, 78 insertions(+), 47 deletions(-)

Comments

Linus Walleij May 2, 2024, 8:13 a.m. UTC | #1
On Tue, Apr 30, 2024 at 9:04 AM Linus Walleij <linus.walleij@linaro.org> wrote:

> Convert the Spitz to use software nodes for SPI CS and the
> ADS7846 touchscreen following the pattern used in the TI
> platforms.
>
> The Spitz is the only user of the wait_for_sync() callback in
> the platform data, so define that this is a separate GPIO
> in the device tree bindings (previous patch) and handle this
> directly inside the ADS7846 driver instead.
>
> Add some infrastructure to the PXA boardfile common code to
> handle software nodes attached to the SPI bus instead of
> platform data.
>
> The SPI core will investigate the numner of GPIO handles to
> figure out the number of chipselects used on the platform, so
> no explicit encoding of the number of the number of chipselects
> is needed.
>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Andy's patch series makes the Spitz SPI much cleaner to begin
with so I will hold this off and rebase on top of Andy's stuff once
that is in.

Yours,
Linus Walleij
Dmitry Torokhov June 21, 2024, 10:26 p.m. UTC | #2
On Thu, May 02, 2024 at 10:13:44AM +0200, Linus Walleij wrote:
> On Tue, Apr 30, 2024 at 9:04 AM Linus Walleij <linus.walleij@linaro.org> wrote:
> 
> > Convert the Spitz to use software nodes for SPI CS and the
> > ADS7846 touchscreen following the pattern used in the TI
> > platforms.
> >
> > The Spitz is the only user of the wait_for_sync() callback in
> > the platform data, so define that this is a separate GPIO
> > in the device tree bindings (previous patch) and handle this
> > directly inside the ADS7846 driver instead.
> >
> > Add some infrastructure to the PXA boardfile common code to
> > handle software nodes attached to the SPI bus instead of
> > platform data.
> >
> > The SPI core will investigate the numner of GPIO handles to
> > figure out the number of chipselects used on the platform, so
> > no explicit encoding of the number of the number of chipselects
> > is needed.
> >
> > Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> 
> Andy's patch series makes the Spitz SPI much cleaner to begin
> with so I will hold this off and rebase on top of Andy's stuff once
> that is in.

I dropped spitz parts from the patch leaving only the new hsync gpio
handling (and keeping the old legacy way of doing hsync) and applied.

There's an immutable branch ib/ads6746-hsync in my tree to help us
iterate on spitz changes.

Thanks.
diff mbox series

Patch

diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 661b3fc43275..e0e21cb97f71 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -9,6 +9,7 @@ 
 #include <linux/dmaengine.h>
 #include <linux/spi/pxa2xx_spi.h>
 #include <linux/platform_data/i2c-pxa.h>
+#include <linux/property.h>
 #include <linux/soc/pxa/cpu.h>
 
 #include "udc.h"
@@ -682,6 +683,21 @@  void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info)
 	platform_device_add(pd);
 }
 
+void __init pxa2xx_set_spi_node(unsigned id, const struct property_entry *props)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	device_create_managed_software_node(&pd->dev, props, NULL);
+	platform_device_add(pd);
+}
+
 static struct resource pxa_dma_resource[] = {
 	[0] = {
 		.start	= 0x40000000,
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 36aec5ea7218..bc93ceed0022 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -14,6 +14,7 @@ 
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/gpio/machine.h>
+#include <linux/gpio/property.h>
 #include <linux/leds.h>
 #include <linux/i2c.h>
 #include <linux/platform_data/i2c-pxa.h>
@@ -28,6 +29,7 @@ 
 #include <linux/input/matrix_keypad.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
+#include <linux/property.h>
 #include <linux/reboot.h>
 #include <linux/memblock.h>
 
@@ -128,6 +130,15 @@  static unsigned long spitz_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_FALL,	/* SPITZ_GPIO_RESET */
 };
 
+static const struct software_node pxa_gpiochip_node = {
+	.name = "gpio-pxa",
+};
+
+static const struct software_node *spitz_gpiochip_nodes[] = {
+	&pxa_gpiochip_node,
+	/* TODO: add the GPIO expander nodes here */
+	NULL
+};
 
 /******************************************************************************
  * Scoop GPIO expander
@@ -500,31 +511,23 @@  static inline void spitz_leds_init(void) {}
  * SSP Devices
  ******************************************************************************/
 #if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
-static void spitz_ads7846_wait_for_hsync(void)
-{
-	while (gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-
-	while (!gpio_get_value(SPITZ_GPIO_HSYNC))
-		cpu_relax();
-}
 
-static struct ads7846_platform_data spitz_ads7846_info = {
-	.model			= 7846,
-	.vref_delay_usecs	= 100,
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1024,
-	.wait_for_sync		= spitz_ads7846_wait_for_hsync,
+static const struct property_entry spitz_ads7846_props[] = {
+	PROPERTY_ENTRY_STRING("compatible", "ti,ads7846"),
+	PROPERTY_ENTRY_U32("touchscreen-max-pressure", 1024),
+	PROPERTY_ENTRY_U16("ti,x-plate-ohms", 419),
+	PROPERTY_ENTRY_U16("ti,y-plate-ohms", 486),
+	PROPERTY_ENTRY_U16("ti,vref-delay-usecs", 100),
+	PROPERTY_ENTRY_GPIO("pendown-gpios", &pxa_gpiochip_node,
+			    SPITZ_GPIO_TP_INT, GPIO_ACTIVE_LOW),
+	PROPERTY_ENTRY_GPIO("ti,hsync-gpios", &pxa_gpiochip_node,
+			    SPITZ_GPIO_HSYNC, GPIO_ACTIVE_LOW),
+	{ }
 };
 
-static struct gpiod_lookup_table spitz_ads7846_gpio_table = {
-	.dev_id = "spi2.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", SPITZ_GPIO_TP_INT,
-			    "pendown", GPIO_ACTIVE_LOW),
-		{ }
-	},
+static const struct software_node spitz_ads7846_swnode = {
+	.name = "ads7846",
+	.properties = spitz_ads7846_props,
 };
 
 static struct gpiod_lookup_table spitz_lcdcon_gpio_table = {
@@ -563,8 +566,7 @@  static struct spi_board_info spitz_spi_devices[] = {
 		.max_speed_hz		= 1200000,
 		.bus_num		= 2,
 		.chip_select		= 0,
-		.platform_data		= &spitz_ads7846_info,
-		.irq			= PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
+		.swnode			= &spitz_ads7846_swnode,
 	}, {
 		.modalias		= "corgi-lcd",
 		.max_speed_hz		= 50000,
@@ -579,18 +581,18 @@  static struct spi_board_info spitz_spi_devices[] = {
 	},
 };
 
-static struct pxa2xx_spi_controller spitz_spi_info = {
-	.num_chipselect	= 3,
+static const struct software_node_ref_args spitz_spi_gpio_refs[] = {
+	SOFTWARE_NODE_REFERENCE(&pxa_gpiochip_node, SPITZ_GPIO_ADS7846_CS,
+				GPIO_ACTIVE_LOW),
+	SOFTWARE_NODE_REFERENCE(&pxa_gpiochip_node, SPITZ_GPIO_LCDCON_CS,
+				GPIO_ACTIVE_LOW),
+	SOFTWARE_NODE_REFERENCE(&pxa_gpiochip_node, SPITZ_GPIO_MAX1111_CS,
+				GPIO_ACTIVE_LOW),
 };
 
-static struct gpiod_lookup_table spitz_spi_gpio_table = {
-	.dev_id = "spi2",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_MAX1111_CS, "cs", 2, GPIO_ACTIVE_LOW),
-		{ },
-	},
+static const struct property_entry spitz_spi_props[] = {
+	PROPERTY_ENTRY_REF_ARRAY("gpios", spitz_spi_gpio_refs),
+	{ }
 };
 
 static void __init spitz_spi_init(void)
@@ -600,9 +602,7 @@  static void __init spitz_spi_init(void)
 	else
 		gpiod_add_lookup_table(&spitz_lcdcon_gpio_table);
 
-	gpiod_add_lookup_table(&spitz_ads7846_gpio_table);
-	gpiod_add_lookup_table(&spitz_spi_gpio_table);
-	pxa2xx_set_spi_info(2, &spitz_spi_info);
+	pxa2xx_set_spi_node(2, spitz_spi_props);
 	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
 }
 #else
@@ -1007,6 +1007,7 @@  static void spitz_restart(enum reboot_mode mode, const char *cmd)
 
 static void __init spitz_init(void)
 {
+	software_node_register_node_group(spitz_gpiochip_nodes);
 	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
 	pm_power_off = spitz_poweroff;
 
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
index d2bbb436a77d..af02f70e66fc 100644
--- a/drivers/input/touchscreen/ads7846.c
+++ b/drivers/input/touchscreen/ads7846.c
@@ -138,8 +138,7 @@  struct ads7846 {
 	void			*filter_data;
 	int			(*get_pendown_state)(void);
 	struct gpio_desc	*gpio_pendown;
-
-	void			(*wait_for_sync)(void);
+	struct gpio_desc	*gpio_hsync;
 };
 
 enum ads7846_filter {
@@ -634,10 +633,6 @@  ATTRIBUTE_GROUPS(ads784x);
 
 /*--------------------------------------------------------------------------*/
 
-static void null_wait_for_sync(void)
-{
-}
-
 static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
 {
 	struct ads7846 *ts = ads;
@@ -790,6 +785,23 @@  static int ads7846_filter(struct ads7846 *ts)
 	return 0;
 }
 
+static void ads7846_wait_for_hsync(struct ads7846 *ts)
+{
+	if (!ts->gpio_hsync)
+		return;
+
+	/*
+	 * Wait for HSYNC to assert the line should be flagged
+	 * as active low so here we are waiting for it to assert
+	 */
+	while (!gpiod_get_value(ts->gpio_hsync))
+		cpu_relax();
+
+	/* Then we wait for it do de-assert */
+	while (gpiod_get_value(ts->gpio_hsync))
+		cpu_relax();
+}
+
 static void ads7846_read_state(struct ads7846 *ts)
 {
 	struct ads7846_packet *packet = ts->packet;
@@ -800,8 +812,7 @@  static void ads7846_read_state(struct ads7846 *ts)
 	packet->last_cmd_idx = 0;
 
 	while (true) {
-		ts->wait_for_sync();
-
+		ads7846_wait_for_hsync(ts);
 		m = &ts->msg[msg_idx];
 		error = spi_sync(ts->spi, m);
 		if (error) {
@@ -1258,7 +1269,9 @@  static int ads7846_probe(struct spi_device *spi)
 		ts->penirq_recheck_delay_usecs =
 				pdata->penirq_recheck_delay_usecs;
 
-	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+	ts->gpio_hsync = devm_gpiod_get_optional(dev, "ti,hsync", GPIOD_IN);
+	if (IS_ERR(ts->gpio_hsync))
+		return PTR_ERR(ts->gpio_hsync);
 
 	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
 	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h
index a04c1c34c344..fa7c4f119023 100644
--- a/include/linux/spi/ads7846.h
+++ b/include/linux/spi/ads7846.h
@@ -38,7 +38,6 @@  struct ads7846_platform_data {
 	int	gpio_pendown_debounce;	/* platform specific debounce time for
 					 * the gpio_pendown */
 	int	(*get_pendown_state)(void);
-	void	(*wait_for_sync)(void);
 	bool	wakeup;
 	unsigned long irq_flags;
 };
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index ca2cd4e30ead..d166d4469fec 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -6,6 +6,7 @@ 
 #define __LINUX_SPI_PXA2XX_SPI_H
 
 #include <linux/dmaengine.h>
+#include <linux/property.h>
 #include <linux/types.h>
 
 #include <linux/pxa2xx_ssp.h>
@@ -50,6 +51,7 @@  struct pxa2xx_spi_chip {
 #include <linux/clk.h>
 
 extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_controller *info);
+void pxa2xx_set_spi_node(unsigned id, const struct property_entry *props);
 
 #endif