| Message ID | 20240430-rzn1-gmac1-v5-4-62f65a84f418@bootlin.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | net: stmmac: Add support for RZN1 GMAC devices | expand |
On Tue, Apr 30, 2024 at 09:29:44AM +0200, Romain Gantois wrote: > From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk> > > Introduce a mechanism whereby platforms can create their PCS instances > prior to the network device being published to userspace, but after > some of the core stmmac initialisation has been completed. This means > that the data structures that platforms need will be available. > > Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> > Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> > Co-developed-by: Romain Gantois <romain.gantois@bootlin.com> > Signed-off-by: Romain Gantois <romain.gantois@bootlin.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> -Serge(y) > --- > drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 8 +++++++- > include/linux/stmmac.h | 2 ++ > 2 files changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c > index af8ad9768da10..1c788caea0cfb 100644 > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c > @@ -505,7 +505,10 @@ int stmmac_pcs_setup(struct net_device *ndev) > priv = netdev_priv(ndev); > mode = priv->plat->phy_interface; > > - if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) { > + if (priv->plat->pcs_init) { > + ret = priv->plat->pcs_init(priv); > + } else if (priv->plat->mdio_bus_data && > + priv->plat->mdio_bus_data->has_xpcs) { > /* Try to probe the XPCS by scanning all addresses */ > for (addr = 0; addr < PHY_MAX_ADDR; addr++) { > xpcs = xpcs_create_mdiodev(priv->mii, addr, mode); > @@ -531,6 +534,9 @@ int stmmac_pcs_setup(struct net_device *ndev) > > void stmmac_pcs_clean(struct stmmac_priv *priv) > { > + if (priv->plat->pcs_exit) > + priv->plat->pcs_exit(priv); > + > if (!priv->hw->xpcs) > return; > > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h > index dfa1828cd756a..4a24a246c617d 100644 > --- a/include/linux/stmmac.h > +++ b/include/linux/stmmac.h > @@ -285,6 +285,8 @@ struct plat_stmmacenet_data { > int (*crosststamp)(ktime_t *device, struct system_counterval_t *system, > void *ctx); > void (*dump_debug_regs)(void *priv); > + int (*pcs_init)(struct stmmac_priv *priv); > + void (*pcs_exit)(struct stmmac_priv *priv); > void *bsp_priv; > struct clk *stmmac_clk; > struct clk *pclk; > > -- > 2.44.0 >
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index af8ad9768da10..1c788caea0cfb 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -505,7 +505,10 @@ int stmmac_pcs_setup(struct net_device *ndev) priv = netdev_priv(ndev); mode = priv->plat->phy_interface; - if (priv->plat->mdio_bus_data && priv->plat->mdio_bus_data->has_xpcs) { + if (priv->plat->pcs_init) { + ret = priv->plat->pcs_init(priv); + } else if (priv->plat->mdio_bus_data && + priv->plat->mdio_bus_data->has_xpcs) { /* Try to probe the XPCS by scanning all addresses */ for (addr = 0; addr < PHY_MAX_ADDR; addr++) { xpcs = xpcs_create_mdiodev(priv->mii, addr, mode); @@ -531,6 +534,9 @@ int stmmac_pcs_setup(struct net_device *ndev) void stmmac_pcs_clean(struct stmmac_priv *priv) { + if (priv->plat->pcs_exit) + priv->plat->pcs_exit(priv); + if (!priv->hw->xpcs) return; diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index dfa1828cd756a..4a24a246c617d 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -285,6 +285,8 @@ struct plat_stmmacenet_data { int (*crosststamp)(ktime_t *device, struct system_counterval_t *system, void *ctx); void (*dump_debug_regs)(void *priv); + int (*pcs_init)(struct stmmac_priv *priv); + void (*pcs_exit)(struct stmmac_priv *priv); void *bsp_priv; struct clk *stmmac_clk; struct clk *pclk;