diff mbox series

[2/2] fpga: zynq-fpga: use 'time_left' variable with wait_for_completion_timeout()

Message ID 20240502210038.11480-3-wsa+renesas@sang-engineering.com (mailing list archive)
State New
Headers show
Series fpga: use 'time_left' instead of 'timeout' with wait_for_*() functions | expand

Commit Message

Wolfram Sang May 2, 2024, 9 p.m. UTC
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:

	timeout = wait_for_completion_timeout(...)
	if (!timeout) return -ETIMEDOUT;

with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
 drivers/fpga/zynq-fpga.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Michal Simek May 6, 2024, 8:08 a.m. UTC | #1
On 5/2/24 23:00, Wolfram Sang wrote:
> There is a confusing pattern in the kernel to use a variable named 'timeout' to
> store the result of wait_for_completion_timeout() causing patterns like:
> 
> 	timeout = wait_for_completion_timeout(...)
> 	if (!timeout) return -ETIMEDOUT;
> 
> with all kinds of permutations. Use 'time_left' as a variable to make the code
> self explaining.
> 
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> ---
>   drivers/fpga/zynq-fpga.c | 8 ++++----
>   1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
> index 0ac93183d201..4db3d80e10b0 100644
> --- a/drivers/fpga/zynq-fpga.c
> +++ b/drivers/fpga/zynq-fpga.c
> @@ -387,7 +387,7 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
>   	const char *why;
>   	int err;
>   	u32 intr_status;
> -	unsigned long timeout;
> +	unsigned long time_left;
>   	unsigned long flags;
>   	struct scatterlist *sg;
>   	int i;
> @@ -427,8 +427,8 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
>   	zynq_step_dma(priv);
>   	spin_unlock_irqrestore(&priv->dma_lock, flags);
>   
> -	timeout = wait_for_completion_timeout(&priv->dma_done,
> -					      msecs_to_jiffies(DMA_TIMEOUT_MS));
> +	time_left = wait_for_completion_timeout(&priv->dma_done,
> +						msecs_to_jiffies(DMA_TIMEOUT_MS));
>   
>   	spin_lock_irqsave(&priv->dma_lock, flags);
>   	zynq_fpga_set_irq(priv, 0);
> @@ -452,7 +452,7 @@ static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
>   
>   	if (priv->cur_sg ||
>   	    !((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
> -		if (timeout == 0)
> +		if (time_left == 0)
>   			why = "DMA timed out";
>   		else
>   			why = "DMA did not complete";

Acked-by: Michal Simek <michal.simek@amd.com>

Thanks,
Michal
diff mbox series

Patch

diff --git a/drivers/fpga/zynq-fpga.c b/drivers/fpga/zynq-fpga.c
index 0ac93183d201..4db3d80e10b0 100644
--- a/drivers/fpga/zynq-fpga.c
+++ b/drivers/fpga/zynq-fpga.c
@@ -387,7 +387,7 @@  static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
 	const char *why;
 	int err;
 	u32 intr_status;
-	unsigned long timeout;
+	unsigned long time_left;
 	unsigned long flags;
 	struct scatterlist *sg;
 	int i;
@@ -427,8 +427,8 @@  static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
 	zynq_step_dma(priv);
 	spin_unlock_irqrestore(&priv->dma_lock, flags);
 
-	timeout = wait_for_completion_timeout(&priv->dma_done,
-					      msecs_to_jiffies(DMA_TIMEOUT_MS));
+	time_left = wait_for_completion_timeout(&priv->dma_done,
+						msecs_to_jiffies(DMA_TIMEOUT_MS));
 
 	spin_lock_irqsave(&priv->dma_lock, flags);
 	zynq_fpga_set_irq(priv, 0);
@@ -452,7 +452,7 @@  static int zynq_fpga_ops_write(struct fpga_manager *mgr, struct sg_table *sgt)
 
 	if (priv->cur_sg ||
 	    !((intr_status & IXR_D_P_DONE_MASK) == IXR_D_P_DONE_MASK)) {
-		if (timeout == 0)
+		if (time_left == 0)
 			why = "DMA timed out";
 		else
 			why = "DMA did not complete";