| Message ID | 20240509015709.3668405-1-joy.zou@nxp.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: imx93-11x11-evk: reoder lpi2c2 and lpi2c3 label | expand |
On Thu, May 09, 2024 at 09:57:08AM +0800, Joy Zou wrote: > Reorder lpi2c2 and lpi2c3 label in alphabetical order. > > Signed-off-by: Joy Zou <joy.zou@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> > --- > .../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++--------- > 1 file changed, 105 insertions(+), 112 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts > index d400d85f42a9..6be1eb920c02 100644 > --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts > +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts > @@ -105,6 +105,104 @@ &mu2 { > status = "okay"; > }; > > +&lpi2c2 { > + #address-cells = <1>; > + #size-cells = <0>; > + clock-frequency = <400000>; > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&pinctrl_lpi2c2>; > + pinctrl-1 = <&pinctrl_lpi2c2>; > + status = "okay"; > + > + pcal6524: gpio@22 { > + compatible = "nxp,pcal6524"; > + reg = <0x22>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcal6524>; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupt-parent = <&gpio3>; > + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; > + }; > + > + pmic@25 { > + compatible = "nxp,pca9451a"; > + reg = <0x25>; > + interrupt-parent = <&pcal6524>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + > + regulators { > + buck1: BUCK1 { > + regulator-name = "BUCK1"; > + regulator-min-microvolt = <610000>; > + regulator-max-microvolt = <950000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck2: BUCK2 { > + regulator-name = "BUCK2"; > + regulator-min-microvolt = <600000>; > + regulator-max-microvolt = <670000>; > + regulator-boot-on; > + regulator-always-on; > + regulator-ramp-delay = <3125>; > + }; > + > + buck4: BUCK4{ > + regulator-name = "BUCK4"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck5: BUCK5{ > + regulator-name = "BUCK5"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <3400000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + buck6: BUCK6 { > + regulator-name = "BUCK6"; > + regulator-min-microvolt = <1060000>; > + regulator-max-microvolt = <1140000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo1: LDO1 { > + regulator-name = "LDO1"; > + regulator-min-microvolt = <1620000>; > + regulator-max-microvolt = <1980000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo4: LDO4 { > + regulator-name = "LDO4"; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <840000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + ldo5: LDO5 { > + regulator-name = "LDO5"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > &lpi2c3 { > #address-cells = <1>; > #size-cells = <0>; > @@ -113,6 +211,13 @@ &lpi2c3 { > pinctrl-0 = <&pinctrl_lpi2c3>; > status = "okay"; > > + pcf2131: rtc@53 { > + compatible = "nxp,pcf2131"; > + reg = <0x53>; > + interrupt-parent = <&pcal6524>; > + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; > + }; > + > ptn5110: tcpc@50 { > compatible = "nxp,ptn5110", "tcpci"; > reg = <0x50>; > @@ -304,118 +409,6 @@ &wdog3 { > status = "okay"; > }; > > -&lpi2c2 { > - #address-cells = <1>; > - #size-cells = <0>; > - clock-frequency = <400000>; > - pinctrl-names = "default", "sleep"; > - pinctrl-0 = <&pinctrl_lpi2c2>; > - pinctrl-1 = <&pinctrl_lpi2c2>; > - status = "okay"; > - > - pcal6524: gpio@22 { > - compatible = "nxp,pcal6524"; > - reg = <0x22>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_pcal6524>; > - gpio-controller; > - #gpio-cells = <2>; > - interrupt-controller; > - #interrupt-cells = <2>; > - interrupt-parent = <&gpio3>; > - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; > - }; > - > - pmic@25 { > - compatible = "nxp,pca9451a"; > - reg = <0x25>; > - interrupt-parent = <&pcal6524>; > - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > - > - regulators { > - buck1: BUCK1 { > - regulator-name = "BUCK1"; > - regulator-min-microvolt = <610000>; > - regulator-max-microvolt = <950000>; > - regulator-boot-on; > - regulator-always-on; > - regulator-ramp-delay = <3125>; > - }; > - > - buck2: BUCK2 { > - regulator-name = "BUCK2"; > - regulator-min-microvolt = <600000>; > - regulator-max-microvolt = <670000>; > - regulator-boot-on; > - regulator-always-on; > - regulator-ramp-delay = <3125>; > - }; > - > - buck4: BUCK4{ > - regulator-name = "BUCK4"; > - regulator-min-microvolt = <1620000>; > - regulator-max-microvolt = <3400000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - > - buck5: BUCK5{ > - regulator-name = "BUCK5"; > - regulator-min-microvolt = <1620000>; > - regulator-max-microvolt = <3400000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - > - buck6: BUCK6 { > - regulator-name = "BUCK6"; > - regulator-min-microvolt = <1060000>; > - regulator-max-microvolt = <1140000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - > - ldo1: LDO1 { > - regulator-name = "LDO1"; > - regulator-min-microvolt = <1620000>; > - regulator-max-microvolt = <1980000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - > - ldo4: LDO4 { > - regulator-name = "LDO4"; > - regulator-min-microvolt = <800000>; > - regulator-max-microvolt = <840000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - > - ldo5: LDO5 { > - regulator-name = "LDO5"; > - regulator-min-microvolt = <1800000>; > - regulator-max-microvolt = <3300000>; > - regulator-boot-on; > - regulator-always-on; > - }; > - }; > - }; > -}; > - > -&lpi2c3 { > - clock-frequency = <400000>; > - pinctrl-names = "default"; > - pinctrl-0 = <&pinctrl_lpi2c3>; > - status = "okay"; > - > - pcf2131: rtc@53 { > - compatible = "nxp,pcf2131"; > - reg = <0x53>; > - interrupt-parent = <&pcal6524>; > - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; > - }; > -}; > - > &iomuxc { > pinctrl_eqos: eqosgrp { > fsl,pins = < > -- > 2.37.1 >
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts index d400d85f42a9..6be1eb920c02 100644 --- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts @@ -105,6 +105,104 @@ &mu2 { status = "okay"; }; +&lpi2c2 { + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&pinctrl_lpi2c2>; + pinctrl-1 = <&pinctrl_lpi2c2>; + status = "okay"; + + pcal6524: gpio@22 { + compatible = "nxp,pcal6524"; + reg = <0x22>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcal6524>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio3>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + }; + + pmic@25 { + compatible = "nxp,pca9451a"; + reg = <0x25>; + interrupt-parent = <&pcal6524>; + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1: BUCK1 { + regulator-name = "BUCK1"; + regulator-min-microvolt = <610000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck2: BUCK2 { + regulator-name = "BUCK2"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <670000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + buck4: BUCK4{ + regulator-name = "BUCK4"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: BUCK5{ + regulator-name = "BUCK5"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <3400000>; + regulator-boot-on; + regulator-always-on; + }; + + buck6: BUCK6 { + regulator-name = "BUCK6"; + regulator-min-microvolt = <1060000>; + regulator-max-microvolt = <1140000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: LDO1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: LDO4 { + regulator-name = "LDO4"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <840000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5: LDO5 { + regulator-name = "LDO5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; +}; + &lpi2c3 { #address-cells = <1>; #size-cells = <0>; @@ -113,6 +211,13 @@ &lpi2c3 { pinctrl-0 = <&pinctrl_lpi2c3>; status = "okay"; + pcf2131: rtc@53 { + compatible = "nxp,pcf2131"; + reg = <0x53>; + interrupt-parent = <&pcal6524>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + }; + ptn5110: tcpc@50 { compatible = "nxp,ptn5110", "tcpci"; reg = <0x50>; @@ -304,118 +409,6 @@ &wdog3 { status = "okay"; }; -&lpi2c2 { - #address-cells = <1>; - #size-cells = <0>; - clock-frequency = <400000>; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&pinctrl_lpi2c2>; - pinctrl-1 = <&pinctrl_lpi2c2>; - status = "okay"; - - pcal6524: gpio@22 { - compatible = "nxp,pcal6524"; - reg = <0x22>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_pcal6524>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupt-parent = <&gpio3>; - interrupts = <27 IRQ_TYPE_LEVEL_LOW>; - }; - - pmic@25 { - compatible = "nxp,pca9451a"; - reg = <0x25>; - interrupt-parent = <&pcal6524>; - interrupts = <11 IRQ_TYPE_EDGE_FALLING>; - - regulators { - buck1: BUCK1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <610000>; - regulator-max-microvolt = <950000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - }; - - buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <670000>; - regulator-boot-on; - regulator-always-on; - regulator-ramp-delay = <3125>; - }; - - buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <3400000>; - regulator-boot-on; - regulator-always-on; - }; - - buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <1060000>; - regulator-max-microvolt = <1140000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1620000>; - regulator-max-microvolt = <1980000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <840000>; - regulator-boot-on; - regulator-always-on; - }; - - ldo5: LDO5 { - regulator-name = "LDO5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - }; - }; -}; - -&lpi2c3 { - clock-frequency = <400000>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lpi2c3>; - status = "okay"; - - pcf2131: rtc@53 { - compatible = "nxp,pcf2131"; - reg = <0x53>; - interrupt-parent = <&pcal6524>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - }; -}; - &iomuxc { pinctrl_eqos: eqosgrp { fsl,pins = <
Reorder lpi2c2 and lpi2c3 label in alphabetical order. Signed-off-by: Joy Zou <joy.zou@nxp.com> --- .../boot/dts/freescale/imx93-11x11-evk.dts | 217 +++++++++--------- 1 file changed, 105 insertions(+), 112 deletions(-)